MJ LED LIGHTNING MJ-2610D18-4IN1 User manual

LED CITY COLOR 600
MJ-2610D18-4IN1
User Manual
======PROFESSIONAL LED LIGHTING ========
Thank you for choosing LED city color 600. For the sake of your safety, Please
read and follow these instructions carefully and keep this manual in a safe
place for future reference.

Catalogue
Chapter Page
Safety instructions---------------------------------------------------------------------------1
Introduction------------------------------------------------------------------------------------2
Description-------------------------------------------------------------------------------------2
DMX-512 control connection--------------------------------------------------------------2
DMX-512 connection with DMX terminator--------------------------------------------2
Graphic part -----------------------------------------------------------------------------------3
Display menu ---------------------------------------------------------------------------------3
Temperature information -------------------------------------------------------------------5
Cleaning and maintenance----------------------------------------------------------------5
Installation--------------------------------------------------------------------------------------5
Technical parameters -----------------------------------------------------------------------5
DMX functions and values-----------------------------------------------------------------6
Warning-----------------------------------------------------------------------------------------7
WARNING
Please do not use the light under the water!
Please do not connect the power cable hand by hand over 5
lights per time!
Before open the LED city color 600 and if you want to do the repair work,
please make sure the power source is at the separation condition.
Unceasingly carries on the product improvement about our company the
policy, in this instruction booklet carries the data will have the possibility to be
able to change in the future, when no longer separate notice change matters
concerned. Our company retains when the product improvement changes the
related specification the authority. This instruction booklet publisher cannot be
responsible regarding this instruction booklet in information accuracy, also
cannot the related consequence
7

Colour: RGBW Mixing colour
DMX Channel:4/5/9CH
Operation Modes: DMX512, Internal Program,Master/slave
Control Panel: Digital 4 Character Alphanumeric
Waterproof grade: IP 65
Net weight:16.5KGS
Gross weight: 17.5KGS
Packing dimensions: 61x21x44CM
DMX functions and values
Channel
Value Function Description
4CH
5CH
9CH
* 1 1 0-255 Main Dimmer Main dimmer from dark to bright
* * 2 0-3 Strobe No function
4-255 Strobe from slow to quick
1 2 3 0-255 R dimming R dimming from dark to bright
2 3 4 0-255 G dimming G dimming from dark to bright
3 4 5 0-255 B dimming B dimming from dark to bright
4 5 6 0-255 W dimming W dimming from dark to bright
* * 7
0-31
Color choice
No function
32-63 Red
64-95 Green
96-127 Blue
128-159 White
160-191 Red+Green
192-223 Red+Blue
224-255 Green+Blue
* * 8
0-100
Macro
No function
101-150 Color change by jump
151-200 Color change by fade
200-255 Color change by pulse
* * 9 0-255 Speed Macro speed from slow to fast
6
SAFETY INSTRUCTIONS
This device has left the factory in perfect condition. In order to maintain this
condition and to ensure a safe operation, it is absolutely necessary for the
user to follow the safety instructions and warning notes written in this user
manual.
When unpacking and before disposing of the carton, check there is no transportation damage
before using the product. Should there be any damage caused by transportation, consult your
dealer and do not use the apparatus.
The device can be use indoors and outdoors, IP65.
The device is not designed or intended to be mounted directly on to inflammable surfaces
The device is only intended for installation, operation and maintenance by professional person.
Do not device the beam onto inflammable surfaces, minimum distance is 5m.
Avoid direct exposure to the light from the lamp. The light is harmful to the eye.
Do not attempt to dismantle or modify the projector in any way.
Electrical connection must only be carried out by qualified personnel.
Before installation, ensure that the voltage and frequency of power supply match the power
requirements of the projector.
It is essential that each device is correctly earthed and that electrical installation conforms to all
relevant standards.
Do not connect this device to any other types of dimmer apparatus.
Make sure that the power-cord is never crimped or damaged by sharp edges. Never let the
power-cord come into contact with other cables. Only handle the power-cord by the plug. Never
pull out the plug by tugging the power-cord.
LED lens shall be changed if they have become visibly damaged to such an extent that their
effectiveness is impaired, for example by cracks or deep scratches.
Exterior surface temperatures of the luminaire after 5 minutes operation is 50°C，when steady
state is achieved 65°C.
There is no user serviceable parts inside the projector, do not open the housing and never
operate the device with the covers removed.
If you have any questions, don’t hesitate to consult your dealer or manufacturer.
Always disconnect from the mains, when the device is not in use or before
cleaning it or before attempting any maintenance work !
1

Temperature information
This light install over temperature protect. If the light over temperature 60℃.The
brightness will decrease gradually
CAUTION!
The brightness will decrease gradually when the light temperature
is over 60
℃
,and if over 75
℃
,then will black out
CLEANINGAND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft lint-free and
moistened cloth. Never use alcohol or solvents!
CAUTION!
Disconnect from mains before starting maintenance operation.
There are no servicable parts inside the device. Maintenance and service operations
are only to be carried out by authorized dealers.
If you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by
authorized dealers only in order to avoid hazards.
If you have further questions, please contact your dealer.
INSTALLATION
The device must only be installed at a vibration-free, oscilation-free
and fire-resistant location.
TECHNICAL SPECIFICATIONS
Construction: Aluminum
Power supply: AC100V~240V;50 Hz /60Hz
LED: RGBW 4IN1*60LEDs
Power consumption: max. 600 W
LED Beam Angle: 18°
LED Lifetime: 80,000-100,000 hours
5
INTRODUCTION
Thank you for having chosen our LED lighting
Unpack the device ,inside the box you should find:
The fixture device
One power cable
This manual
Please check carefully that there is no damage caused by transportation. Should
there be any ,consult your dealer and don’t install this device.
DESCRIPTION
Features
. Over temperature protect
.4 ,5 or 9 DMX channels selectable for numerous applications
.DMX-controlled operation, Sound-controlled operation or stand alone operation
with Master/Slave-function
. Automatic identify Master signal
. Stepless RGBW colour changing
. Equipped with 4IN1*60 LEDs
. Switch-mode power supply, 100V-240V
. Operation very easy，human design，dimming no flicker、jitter phenomena. Can
be adapted to video, photography, television and other demanding lighting
occasions.
DMX-512 control connection
The product has a DMX 512 input fitted with 3-pin XLR connectors. Screened
cables in compliance with EIA RS-485 specifications and the following
characteristics must be used for connections:
- 2 conductors plus screen
- 120Ohm impedance
- max. transmission rate 250kBaud.
DMX-512 connection with DMX terminator
For installations where the DMX cable has to run a long distance or is in an
electrically noisy environment, such as in a discotheque, it is recommended to use
a DMX terminator. This helps in preventing corruption of the digital control
signal by electrical noise. The DMX terminator is simply an XLR plug with a 120
OHM resistor connected between pins 2 and 3,which is then plugged into the
output XLR socket of the last fixture in the chain.
2

System
Host
Model
ON
Host mode setting:
1.Press K1 enter to menu, It will be show host mode
2.Press K3 and K4 to change the ON/OFF
3.Press K2 to save the mode and K1 to return
OFF
Language Chinese Language setting:
1.Press K1 enter to menu, It will be show language
2.Press K3 and K4 to change the Chinese/English
3.Press K2 to save the mode and K1 to return
English
Backlight
setting
Auto Backlight setting:
1.Press K1 enter to menu will be show Backlight setting
2.Press K3 and K4 to change toAuto/Keep On
3.Press K2 to save the mode and K1 to return
Keep
On
Curve
Curve 1 Curve choosing:
1.Press K1 enter to menu will be show curve model
2.Press K3 and K4 to change to curve mode
3.Press K2 to save the mode and K1 to return
Curve 2
Curve 3
Curve 4
Frequency 2K Dimming frequency selection
10K
Blackout
Time 0-200
Blackout Time setting:
1.Press K1 enter to menu will be show blackout time
2.Press K3 and K4 to change the blackout time value
3.Press K2 to save the mode and K1 to return
Note: Recommended value is set between 50 and 150
Information
Device
Tou(Min)
Check the light use time:
1.Press K1 enter to menu will be see the light use time
2.Press K1 to return
About Version Ver:1.0.1
Note: The user will not press the standby mode for a while; the interface will
automatically enter the standby mode to display the address code of the current
fixture. If there is no signal, the screen will flash; press any key to enter the
selection interface.
Attention: Setting DMX address by button
1. press MENU button when show the dmx menu, then adjust the DMX
address by pressing [UP] or [DOWN] button
2. Press [ENTER] to confirm or pressing [MENU] to return to main
menu.
4
Graphic part
：
Operation description
：
Press “K1” will cycle out 5pcs different functional effect,
LED Top row in represent the current function（Reference function table）。 LED
Top row on behalf of the function in the address code、or speed and other
parameters。Press K3 or K4 key can modify the parameter value。PressK2 to
confirm。
Display menu（All the functions are selected, press K2 to confirm.）
Main Menu Level 1 Level 2 Instructions
DMX
Address 001-255
DMX address setting:
1.Press K1 enter to menu, It will be show address code
2.Press K3 and K4 to change the DMX address code
3.Press K2 to save the mode and K1 to return
Channel
Mode
4CH
Channel mode choose:
1.Press K1 enter to menu, It will be show DMX mode
2.Press K3 and K4 to change the channel mode
3.Press K2 to save the mode and K1 to return
5CH
9CH
Manual
Dimmer 001-255
Manual mode control:
1.Press K1 enter to me
nu, It will be show manual
mode
2.Press K3 and K4 to change the mode
3.Press K2 to save the mode and K1 to return
Strobe 001-255
Red 001-255
Green 001-255
Blue 001-255
White 001-255
Macro Run Mode Stop/Flash/Fade/Pulse
Speed 001-255 The speed of the run mode speed
3