Mobility Sound BTH-500-R User manual

1
<Product Descriptions>
•Heavy duty speaker microphone for POC APPs.
•Volume control buttons, cell phone answerin
/ han in up button, and PTT button are built in.
•Embedded 3.5mm jack for external earphone.
Built-in Micro USB for char in .
<Specification>
Type: Bluetooth Speaker Microphone
Operatin Temp: -20℃±2℃ ~ 50℃±2℃
Approx. Wei ht: 130
• Fully Qualified Bluetooth v4.1
• Echo cancellation, noise reduction, also
extended features
• Hi h Quality DAC, CSR CVC Built-in
• 80MHz RISC MCU and 80MIPS Kalimba DSP
• Fast Current (200mA) battery char e
• SBC, MP3, AAC, Fast stream, APTX codec
support
• RoHS compliant
• HSP / HFP / A2DP / AVRCP profile supports
• Speaker Output: 2W
• PTT function: built-in
• Talkin Ran e: Bluetooth class 2, 10 meters
• Display LED: Blue and Red
• DC Input: 5 Vdc (std.)
• DC Current: 25 mA (Avera e)
• Battery: 1000mAH, not replaceable
• Talk Time: 40 Hours
BTH-500-R

1. PTT
2. Rotatable Back Clip
3. Microphone
4. Speaker
5. Lo o plate
6. Power switch and Volume knob
7. Pairin / Cell Phone Answer key
8. Earphone jack
9. LED Indicator
10. Micro USB jack
2

3
How to use BTH-500-R
PIO state state ent
Power Switch on Device on
Power Switch off Device off
Lon press CELL answer key 3
seconds when power on
Enter pairin mode
CELL short press Answer incomin call
Han up out oin call or active call
BTH-500-R State and LED Flashing Pattern
LED state state ent
Blue led on : 2 sec , off : 1 sec , repeat All profiles are standby but not connected with
any Cellphone device yet.
Blue led flash every 2 sec A2DP or HFP is connected.
Blue led flash twice every 2 sec On A2DP streamin state.
Blue led on : 1 sec , off : 1 sec , repeat On active call state.
Blue led and red led flash alternative repeat Enter pairin mode.
Red led On Battery Char in
Red led Off Battery Full