Mobility Sound C600-M12 User manual

1
<Product Descriptions>
•Heavy duty speaker microphone
•Volume control buttons, cell phone answering
/ hanging up button, and PTT button are built in.
U B for charging.
<Specification>
Type: Bluetooth peaker Microphone
Operating Temp: -20℃±2℃ ~ 50℃±2℃
Approx. Weight:230g
• Fully Qualified Bluetooth v4.0
• Echo cancellation, noise reduction, also
extended features
• High Quality DAC, C R CVC Built-in
• 80MHz RI C MCU and 80MIP Kalimba D P
• • BC, MP3, AAC, Fast stream, APTX codec
support
• RoH compliant
• H P / HFP / A2DP / AVRCP profile supports
• peaker Output: 2W
• PTT function: built-in
• Talking Range: Bluetooth class 2, 10 meters
• Display LED: Blue and Red
• DC Input: 5 Vdc (std.)
• DC Current: 25 mA (Average)
Option: NFC pairing, Car holder
C600-M12

2
PTT
Emergency
Vol+/
-
LED
Hook
Pairing Key
NFC
p
a
i
r
i
n
g

3
How to use
PIO state statement
U B plug to 5V Device on
U B 5V OFF Device off
Pairing key long press >6sec Enter pairing mode from power off
CELL short press Answer incoming call
Hang up outgoing call or active call
CELL long held( >=1.5sec) Emergency
VOL+ short press Volume up
VOL+ long held( >=0.8sec) Volume up continuously
VOL- short press Volume down
VOL- long held( >=0.8sec) Volume down continuously
State and L D Flashing Pattern
L D state statement
Blue led on : 2 sec , off : 1 sec , repeat All profiles are standby but not connected with
any Cellphone device yet.
Blue led flash every 2 sec A2DP or HFP is connected.
Blue led flash twice every 2 sec On A2DP streaming state.
Blue led on : 1 sec , off : 1 sec , repeat On active call state.
Blue led and red led flash alternative repeat Enter pairing mode.