Mobility Sound NORMACONNECT User manual

1
<Product Descriptions>
•Heavy duty speaker microphone for 2 way
radios or POC APP
•Volume control and PTT button are built in.
•Built-in 3.5mm jack for external earphone.
•Built-in Micro USB for charging.
•Built-in PTT-Z receiver board for wireless PTT.
<Specification>
Type: Bluetooth Speaker Microphone
Operating Temp: -20℃±2℃ ~ 50℃±2℃
Approx. Weight: 130g
• Fully Qualified Bluetooth v4.1
• Echo cancellation, noise reduction, also
extended features
• High Quality DAC, CSR CVC Built-in
• 80MHz RISC MCU and 80MIPS Kalimba DSP
• Fast Current (200mA) battery charge
• SBC, MP3, AAC, Fast stream, APTX codec
support
• RoHS compliant
• HFP / BLE profile supports
• Speaker Output: 2W
• PTT function: built-in
• Talking Range: Bluetooth class 2, 10 meters
• Display LED: Blue and Red
• DC Input: 5 Vdc (std.)
• DC Current: 25 mA (Average)
• Battery: 1000mAH, not replaceable
• Talk Time: 40 Hours
BTH-510-R5W5

2
Parts Description
ON/OFF Switch and Volume control
LED
Pairing
External earphone
Back Clip PTT
Micro USB charging
Power on (1)

3
How to use BTH-510-R5W5
PIO state statement
Power Switch on Device on
Power Switch off Device off
Long press answer key 3 seconds
when power on
Enter pairing mode
BTH-510 State and LED Flashing Pattern
LED state statement
Blue led on : 2 sec , off : 1 sec , repeat All profiles are standby but not connected with
any Bluetooth device yet.
Blue led flash every 2 sec HFP is connected.
Blue led on : 1 sec , off : 1 sec , repeat On active call state.
Blue led and red led flash alternative repeat Enter pairing mode.
Red led On Battery Charging
Red led Off Battery Full
How to pair BTH-510
Power on BTH-510
Press Pairing button for 3s until the Blue/Red LED flashes
Power on your Bluetooth radio or dongle and get it into pairing mode.
After BTH-510 paired
Power on PTT-Z and press the PTT
The PTT-Z will be paired
After all paired it’s good to go
If you have pairing issue please visit our Youtube channel