Mobility Sound BTH-600R User manual

1
<Product Descriptions>
•Heavy duty speaker microphone
•Volume control buttons, cell phone answering
/ hanging up button, and PTT button are built in.
•Embedded .5mm jack for external earphone.
Built-in Mini USB for charging.
<Specification>
Type: Bluetooth Speaker Microphone
Operating Temp: -20℃±2℃ ~ 50℃±2℃
Approx. Weight: 140g
• Fully Qualified Bluetooth v4.0
• Echo cancellation, noise reduction, also
extended features
• High Quality DAC, CSR CVC Built-in
• 80MHz RISC MCU and 80MIPS Kalimba DSP
• Fast Current (200mA) battery charge
• SBC, MP , AAC, Fast stream, APTX codec
support
• RoHS compliant
• HSP / HFP / A2DP / AVRCP profile supports
• Speaker Output: 2W
• PTT function: built-in
• Talking Range: Bluetooth class 2, 10 meters
• Display LED: Blue and Red
• DC Input: 5 Vdc (std.)
• DC Current: 25 mA (Average)
• Battery: 1000mAH, BL-5C replaceable
• Talk Time: 40 Hours
BTH-600-R

2
PTT
Cellphone Answer
Vol+/
-
LED
Rotatable
Clip
Mini USB
Power S/W and
Pairing Key
.5mm jack

3
How to use
PIO state state ent
Power S/W long held( >= 1sec) Device on
Power S/W long held( >= 2.5sec) Device off
Power S/W long press >6sec Enter pairing mode from power off
CELL short press Answer incoming call
Hang up outgoing call or active call
CELL long held( >=1sec) Reserved
VOL+ short press Volume up
VOL+ long held( >=0.8sec) Volume up continuously
VOL- short press Volume down
VOL- long held( >=0.8sec) Volume down continuously
BTH-600-R State and LED Flashing Pattern
LED state state ent
Blue led on : 2 sec , off : 1 sec , repeat All profiles are standby but not connected with
any Cellphone device yet.
Blue led flash every 2 sec A2DP or HFP is connected.
Blue led flash twice every 2 sec On A2DP streaming state.
Blue led on : 1 sec , off : 1 sec , repeat On active call state.
Blue led and red led flash alternative repeat Enter pairing mode.
Red led On Battery Charging
Red led Off Battery Full