Mobility Sound BTH-600-AZ User manual

1
<Product Descriptions>
•Heavy duty speaker microphone for Zello iOS
and Android version.
•Volume control buttons, cell phone answering
/ hanging up button, and PTT button are built in.
•Embedded 3.5mm jack for external earphone.
Built-in Mini USB for charging.
<Specification>
Type: Bluetooth Speaker Microphone Operating
Temp: -20℃±2℃~ 50℃±2℃
Approx. Weight: 140g
• Fully Qualified Bluetooth v4.0.
• Echo cancellation, noise reduction, also
extended features
• High Quality DAC, CSR CVC Built-in
• 80MHz RISC MCU and 80MIPS Kalimba DSP
• Fast Current (200mA) battery charge
• SBC, MP3, AAC, Fast stream, APTX codec
support
• RoHS compliant
• HSP / HFP / A2DP / AVRCP/ PBAP / SPP / MAP
profile supports
• Speaker Output: 2W
• PTT function: built-in
• Talking Range: Bluetooth class 2, 10 meters
• Display LED: Blue and Red
• DC Input: 5 Vdc (std.)
• DC Current: 25 mA (Average)
• Battery: 1000mAH, replaceable
• Talk Time: 40 Hours
BTH-600-AZ

2
BTH-600-AZ

3
BTH-600-AZ
BTH-600 State and LED Flashing Pattern
BTH-600-AZ State & Button Press
LED Message
Function
No link and no paired
BTH-600 is OFF
No LED
BTH-600 OFF
BTH-600 is OFF; Press Power
button and hold for 3 seconds.
Both Blue & Red LED ON for 1
second
Turn BTH-600 ON
BTH-600 ON; press and hold
power button for 3 seconds
Red LED flashed 3 times then
OFF
Turn BTH-600 OFF
BTH-600 is off; Press and hold
power button for 6 seconds
Red & Blue LED flashes
alternatively
Get BTH-600 into pairing mode
Unpaired or lost link
Blue LED flashes once every 2
seconds
No link, no pair
BTH-600-AZ State & Button Press
LED Message
Function
Link with Cell Phone
Stand-By mode
Blue LED flashes 3 times every 3
seconds
Standby
Press PTT button
Blue LED flashes 1 time every
second
Start to talk
Press Volume Up/Down under
stand-by mode
Make adjustment of volume
Double press Volume up/down
buttons during playing music
Skip to Next/Previous track
There is a cell phone call coming
in
Both of Blue and Red LED flash
twice per second
User will hear the ring tone
Press Talk/END button when call
coming
Blue LED flashes 1 time per
second during talking cell phone
Music will be stopped during the
call, and will be resumed when
call ends
Press volume keys during the call
Make adjustment of volume
Double press the Talk/End
button under stand-by mode
Redial last number

4
BTH-600-AZ
BTH-600 State and LED Flashing Pattern (continued)
BTH-600-AZ State & Button Press
LED Message
Function
Volume adjustment
Volume UP
5 steps in volume adjust, when
reach the maximum volume, a
beep sound is heard
Volume Down
5 steps in volume adjust, when
reach the minimum volume, a
short beep is heard and the
earphone is muted

5
BTH-600-AZ
BTH-600-AZ Pairing Process for Zello iOS
1. Make sure BTH-600-AZ is OFF, and press power switch and hold for 6 seconds
2. BTH-600-AZ is under pairing mode when you see the LED flashing RED and BLUE
alternatively.
3. Start Bluetooth function on your smart phone.
4. Find the device name “BTH-600-AZ”under Bluetooth column and connect it.
5. Start Zello, go to options, select Push To Talk buttons, select Wireless Zello button,
start Wireless button service, and then find the device PTT-Z and connect it.
6. Pairing process is completed.

6
BTH-600-AZ
BTH-600-AZ Pairing Process for Zello Android
1. Make sure BTH-600-AZ is OFF, and press power switch and hold for 6 seconds
2. BTH-600-AZ is under pairing mode when you see the LED flashing RED and BLUE
alternatively.
3. Start Bluetooth function on your smart phone.
4. Find the device name “BTH-600-AZ”under Bluetooth column and connect it.
5. Start Zello, go to options, select Push To Talk buttons, select Bluetooth PTT control
device, and then select the device name BTH-600-AZ.
6. Pairing process is completed.