Mocka Dakota Console Table User manual

Dakota Console Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
Wall Strap
washer
x2
Y
wall
anchor
x1
X
safety
strap x1
WV
wall
screw
x1
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
Allen Key
x1
A B
C
Hardware Supplied
bolt
x12
screw
x12
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Phillips screwdriver required
D
screw
x6

Dakota Console Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
Panel Layout
3
1
3
1
3
2
3
2
3
5
3
5
3
4
3
3
3
3
3
3
3
3

Dakota Console Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
1x2 2
Attach panels [3] to panel [5] with 6x screws (B).
Tighten with a screwdriver.
Attach panel [1] to panels [2] and [5] with 6x bolts (A). Tighten
with an Allen Key (C).
3
1
3
5
3
3
3
3
B
B
B
B
B
B
A
A
A
A
A
A
3
2
3
2
A
C
3
5
3
5

Dakota Console Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
3 4
Attach panel [1] to panels [2] and [5] with 6x bolts (A). Tighten
with an Allen Key (C).
Attach panel [4] to panels [2] with 6x screws (D), 1x safety strap (V)
and 1x washer (W). Tighten with a screwdriver.
3
13
4
3
2
3
2
3
2
C
A
A
A
A
A
A
D
DD
D
WV
D
D
3
5
3
5
D
W
V

Dakota Console Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
65
You’re done, enjoy!Once assembled lift furniture into place, do not drag. Use a
drill to create a small hole lining up with the top of the safety
strap (V). Fasten to the wall using 1x washer (W) , 1x wall
anchor (X) and 1x wall screw (Y). Ensure the unit is balanced
and steady before use.
X
Y
W
V
wall
anchor
screw
strap
washer