Mocka Maya Entertainment Unit User manual

WARNING: Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
Hardware Supplied
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
Maya Entertainment Unit
1
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
Phillips & Flathead screwdrivers required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
A B C D EFI
J
dowel
x28
screw
x20
bolt
x28
locking
nut x28
small
screw x30
long
screw x8
KL
CL runner
tracks x3
CR
runner
tracks x3
DL
runners
x3
DR
runners
x3
G
wedge
x8
H
screw
x8
M
adjuster
x1
N
cover
x8
P
bracket
x4
Q
screw
x12
R
screw
x4
O
felt pad
x4
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1

12
Insert 8x bolts (A) and 8x dowels (C) into panel [1]. Insert 4x bolts
(A) into panel [6]. Tighten with a screwdriver.
Maya Entertainment Unit
2
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
Assembly Instructions
Attach 1x CL runner track (I) to panel [2] and secure with 3x small
screws (F). Attach 1x CR runner track (J) to panel [3] and secure
with 3x small screws (F). Insert 4x bolts (A) and 4x dowels (C) into
panels [2] and [3]. Tighten with a screwdriver.
A
A
1
A
A
A
A
A
A
6A
A
A
A
3
2
A
A
A
A
CC
CC
C
C
C
C
C
C
C
C
J
F
F
F
F
F
F
I
I
CL
F
J
CR
F

Attach 1x CL runner tracks (I) to each panel [7] and secure with
3x small screws (F). Flip panels [7] over, attach 1x CR runner
tracks (J) to each panel [7], and secure with 3x small screws (F).
Tighten with a screwdriver.
34
Attach panels [2] and [3] to panel [6] and secure with 4x locking nuts
(B) and tighten with a screwdriver.
Maya Entertainment Unit
3
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
Assembly Instructions
B
B
B
B
2
3
6
F
F
F
B
I
7
x 2
I
CL
F
F
J
CR
F
F
F
J
7

Attach 2x panels [5] to panel [6] with 4x dowels (C) and secure with
4x long screws (R) and tighten with a screwdriver.
5
Slide panel [8] between the grooves of panels [2] ,[3] and [6] to form
the back of the unit, as shown. Attach panel [1] to the rest of
the unit and secure with 8x locking nuts (B) and tighten with a
screwdriver. Seal the holes with 8 x covers (N).
Maya Entertainment Unit
Assembly Instructions
4
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
C
C
R
R
6
B
B
B
6
5
5
5
5
1
B
82
3
N
N
N
B
N
R
R

B
B
7
7
6
2
3
6
9
B
B
C
C
Attach 2x panels [7] to panel [6] with 4x dowels (C) and secure with
4x locking nuts (B) and tighten with a screwdriver.
7
Slide panel [9] between the grooves of panels [2] ,[3] and [6] to form
the back of the unit, as shown.
Maya Entertainment Unit
Assembly Instructions
5
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
B

Jolt Wardrobe
mocka.co.nz | mocka.com.au
9
Attach panel [4] to the rest of the unit with 8x dowels (C) and
secure with 8x long screws (D) and tighten with a screwdriver.
Maya Entertainment Unit
Assembly Instructions
6
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
10
Attach 4x brackets (M) to the panel [4] and secure with 20x
screws (E), and tighten with a screwdriver.
C
C
C
2
3
7
7
4
C
C
D
D
D
D
D
D
D
D
4
E
E
E
E
E
M
M
M
M
M

11
Jolt Wardrobe
mocka.co.nz | mocka.com.au
11
Turn 4 x legs [10] into brackets (M) until firm. Apply 4 x felt pads (O)
to legs [10] as shown. Turn 1x support leg [16] into panel [4] until
firm. Insert the adjuster (P) into the middle support leg.
Maya Entertainment Unit
Assembly Instructions
7
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
12
Insert 4x bolt (A) into panel [11]. Tighten with a screwdriver.
Drawers x3
A
A
A
A
10
10
10
10
O
O
O
O
MM
M
M
16
P
P
4

Jolt Wardrobe
mocka.co.nz | mocka.com.au
13
Attach panels [12] and [13] to panel [11] with 4x locking nuts (B).
Tighten with a screwdriver.
Maya Entertainment Unit
Assembly Instructions
8
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
14
Slide panel [14] along the grooves between the side panels [12] and
[13] to form the base of the drawer.
Drawers x3Drawers x3
13
14
13
11
12
12
B
B
B
B
11
B

15
12
Jolt Wardrobe
mocka.co.nz | mocka.com.au
15
Attach panels [15], [12] and [13] with 4x screws (Q). Tighten with a
screwdriver.
Maya Entertainment Unit
Assembly Instructions
9
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
16
Attach DL runner (K) to panel [12] and DR runner (L) to panel [13] with
4x small screws (F). Tighten with a screwdriver. Complete the other
two drawers.
Drawers x3
Q
Q
Q
Q
13
Drawers x3
F
F
F
F
K
L
13
12

Jolt Wardrobe
mocka.co.nz | mocka.com.au
17
Insert the completed drawer into the main unit as shown, ensuring
they slide easily along the rails.
Maya Entertainment Unit
Assembly Instructions
10
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
18
Attach 8x wedges (G) to the corners of the panels [8] and [9] as
shown, and secure with 8x small screws (H). Attach 1x safety strap
(V) to the top panel [1] of the back side of the unit as shown using 1x
washer (Z) and 1x screw (W). Tighten with a screwdriver.
H
G
H
G
H
G
H
G
H
G
8
9
screw
washer
strap
V
Z
W

Jolt Wardrobe
mocka.co.nz | mocka.com.au
19
Once assembled lift furniture into place, do not drag. Attach the other end
of the safety strap (V) to the wall using 1x screw (Y), 1x wall plug (X) and
1x washer (Z). Tighten with a screwdriver.
Maya Entertainment Unit
Assembly Instructions
11
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
20
You're done, enjoy!
X
Y
Z
wall
plug
screw
strap
washer