Mocka Vibe/Olsen Tallboy User manual

WARNING: Any furniture that is not
anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a
child attempts to climb up on the
furniture or in the event of an
earthquake. Accordingly, we recommend
that all furniture is anchored to a wall.
We supply a free safety wall anchor with
all furniture sold and we recommend
these are used to prevent your product
tipping. The fixing device provided
should fit most wall types, but please
note that different wall materials may
require different fixing devices from
those supplied.
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
Phillips & Flathead screwdrivers required
ABCDE
FGH
Hardware Supplied
dowel
x22
long
screw x20
bolt
x26
locking
nut x26
small
screw x5 long
screw x4
bolt
x12
stopper
x5
I
wedge
x4
J
screw
x4
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
Vibe/Olsen Tallboy
1
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
K
allen
key
x1

12
Insert 4x bolts (A) and 4x dowels (C) into panel [1]. On panels [2] and [3] insert 2x bolts (A) and 14x dowels (C) as shown.
A
A
A
A
C
C
C
C
1
3
2
CCC
C
C
C
C
CA
A
Vibe/Olsen Tallboy
2
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions

34
Attach 1x stopper (G) onto each of the 3x panels [11] and panel [12]
with 4x small screws (F). Tighten with a screwdriver.
Vibe/Olsen Tallboy
3
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions
Attach 3x panels [11] and [12] to panel [2] and secure with 1x locking nuts (B) .
Tighten with a screwdriver. Now attach panel [3].
2
11
11
12
11
3
B
11 X3
F
G
F
G
12
F
G

56
Vibe/Olsen Tallboy
Assembly Instructions
4
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach panel [1] to the rest of the unit and secure with 4x locking nuts (B).
Tighten with a screwdriver. Slide back panel [5] down the sides of panels
[2] and [3] in between the grooves.
3
2
5
1
B
B
Attach 1x stopper (G) to the underside of panel [4] with 1x small screw
(F). Tighten with a screwdriver.
4F
G
F
G

Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
mocka.co.nz | mocka.com.au
78
Vibe/Olsen Tallboy
Assembly Instructions
5
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach 4x legs [6] to the bottom panel [4] with 12x bolts (E), and tighten
with an Allen key (K).
E
E
E
E
6
3
E
K
4
Insert 4x dowels (C) into the top of side panels [2] and [3]. Attach
panel [4] to the main unit with 4x long screws (H) and tighten with a
screwdriver.
H
H
H
H
4
C
C
3

910
Vibe/Olsen Tallboy
Assembly Instructions
6
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Insert each completed drawer into the main unit.
Attach side panels [8] and [13] to the front drawer panel [7] using 4x
bolts (A) and 4x locking nuts (B). Slide panel [10] in to place using the
grooves between the side panels [8] and [13] . Secure panel [9] onto
the side
drawers.
panels with 4x long screws (D). Repeat for the remaining
D
D
9
10
8
7
13
A
B
B
B
B
A
A
A
Drawers x5

11 12
J
J
J
J
I
I
I
I
strap
V
Z
W
X
Z
Y
V
wall
anchor
wall
screw
Washer
Strap
Attach the safety strap (V) to the top of the back side of the unit using
1x screw (W) and 1 x washer (Z). Tighten with a screwdriver.
Lift the furniture into the desired location, do not drag. Attach the other
end of the safety strap (V) to the wall using 1x screw (Y), 1x wall plug (X)
and 1 x washer (Z). Tighten with a screwdriver. You’re done, enjoy!
screw
washer
Vibe/Olsen Tallboy
Assembly Instructions
7
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558