Mocka Locka User manual

A B C D
Phillips screwdriver required
Hardware Supplied
handle
x2
bolt
x4
wall mount
kit x1
WARNING: Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
E F
clip
x4
rod
x4
washer
x2
Two Door Storage Locker
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Slide the legs [3] into the bottom of panels [1] and [2] until they click into
place.
2
1
CLICK!
CLICK!
3
3
2
1
Two Door Storage Locker
2
mocka.co.nz | mocka.com.au
Assembly Instructions

12
Slide the legs [3] into the bottom of panels [1] and [2] until they click into
place.
2
1
CLICK!
CLICK!
3
3
2
1
34
Slide the legs [4] into the bottom of panels [1] and [2] until they click into
place.
Attach panel [5] to panels [1] and [3] as shown.
4
3
CLICK!
CLICK!
2
1
2
1
4
3
5
Two Door Storage Locker
3
mocka.co.nz | mocka.com.au
Assembly Instructions

56
Attach panel [6] between panels [2] and [5] as shown. Secure the bottom panel [7] by clicking into place as shown.
7
6
2
1
5
2
1
Two Door Storage Locker
Assembly Instructions
4
mocka.co.nz | mocka.com.au

Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz | mocka.com.au
56
Attach panel [6] between panels [2] and [5] as shown. Secure the bottom panel [7] by clicking into place as shown.
7
6
2
1
5
2
1
78
Attach the top panel [8] as shown. Secure the top panel [8] by clicking into place as shown.
8
7
65
2
1
8
2
Two Door Storage Locker
Assembly Instructions
5
mocka.co.nz | mocka.com.au

910
Insert 4x clips (A) into the back and front clip brackets at your desired
shelf height as shown.
Place panel [9] into the unit over the clips to form the shelf.
8
65
2
1
x4
A
A
8
9
Two Door Storage Locker
Assembly Instructions
6
mocka.co.nz | mocka.com.au

910
Insert 4x clips (A) into the back and front clip brackets at your desired
shelf height as shown.
Place panel [9] into the unit over the clips to form the shelf.
8
65
2
1
x4
A
A
8
9
11
12
Attach handle (E) to door panel [10] with 2x bolts (D) and tighten with a
screwdriver.
Attach the bottom of the door by inserting 1x washer (B) and 1x rod (C)
through the door panel [10] as shown. Twist the rod into place and
secure by bending the clasp down.
8
2
DE
D
10
10
B
C
C
Two Door Storage Locker
Assembly Instructions
7
mocka.co.nz | mocka.com.au

13 14
To attach the top of the door, insert 1x rod (C) through the door panel
as shown. Twist the rod into place and secure by bending the clasp up
onto it.
Repeat Steps 11 to 13 to attach the other door [11].
10
8
2
8
2
10
11
C
C
Two Door Storage Locker
Assembly Instructions
8
mocka.co.nz | mocka.com.au

13 14
To attach the top of the door, insert 1x rod (C) through the door panel
as shown. Twist the rod into place and secure by bending the clasp up
onto it.
Repeat Steps 11 to 13 to attach the other door [11].
10
8
2
8
2
10
11
C
C
15 16
Lift the completed unit into place, do not drag. Mark its height on the
wall with a pencil. Attach one end of the wall mount strap (F) to the
back of the unit with a 1x screw (F).
Screw the other end into the wall at the marked height with a wall screw
(not supplied). You’re done, enjoy!
F
Wall Mount
F
Two Door Storage Locker
Assembly Instructions
9
mocka.co.nz | mocka.com.au