Mocka Dahlia Six Drawer User manual

Dahlia Six Drawer
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
Wall Strap
x4
washer
Z
Y
wall
anchor
x2
X
safety
strap x2
WV
screw
x2
wall
screw
x2
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
bolt
x60
ABCDEF
G H J K I
Hardware Supplied
dowel
x21
small
screw x60
slide
rail x6
slide
rail x6
slide
rail x6
slide
rail x6
locking
nut x60
screw
x37
x8
wedge plastic
glide x6
Phillips & Flathead screwdrivers
and hammer required
L
screw
x8

Dahlia Six Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
1 2
Insert 6x bolts (C) to panel [1]. Tighten with a screwdriver. Attach 3x slide rails (G) to panel [3] and secure with 9x small screws (E).
Tighten with a screwdriver. Attach 3x slide rails (F) to panel [2] and
secure with 9x screws (E). Tighten with a screwdriver.
.
C
C
C
C
C
C
E
E
EE
E
EE
E
E
G
G
G
E
EE
E
E
E
E
E
E
F
F
F
1
2
3
F
CL
E
E
G
CR

Dahlia Six Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
34
Insert 18x bolts (C) into panels [2] and [3] as shown.
Tighten with a screwdriver.
Attach 3x slide rails (F) and 3x slide rails (G) to panel [4] as shown, secure
with 18x small screws (E). Tighten with a screwdriver.
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
CC
C
FLIP
E
E
EE
E
EE
E
E
E
E
E
E
E
E
E
EE
2
34
4
F
F
F
G
G
G
F
CL
E
E
G
CR

Dahlia Six Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
65
Insert 6x bolts (C) into panel [4]. Tighten with a screwdriver. Attach panels [5] and [6] to panel [4] with 6x dowels (A) and secure
with 6x locking nuts (D). Tighten with a screwdriver.
FLIP
C
C
C
C
C
C
A
A
A
A
DA
A
D
D
D
D
D
4
4
4
5
6
6
5
6
6
D

Dahlia Six Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
78
Attach panel [7] to panel [4] with 1x dowel (A) and secure
with 1x screw (B). Tighten with a screwdriver.
Attach panels [8] and [9] to panel [4] with 2x dowels (A) and secure
with 2x screws (B). Tighten with a screwdriver.
A
B
B
B
A
A
4
7
8
9
4
B

Dahlia Six Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
9 10
Attach panel [3] to panels [5], [6], [7], [8] and [9] with 3x dowels (A)
and secure with 9x locking nuts (D). Tighten with a screwdriver.
Slide panel [10] down along the grooves between the panels [8] and [9] as shown.
D
A
A
A
D
DD
D
D
3
10
7
5
6
8
9
6
8
9

Dahlia Six Drawer
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
11
Assembly Instructions
Attach panel [2] to panels [5], [6], [7], [8],and [9] with 3x dowels (A)
and secure with 9x locking nuts (D). Tighten with a screwdriver.
Attach 6x plastic glides (K) to the panels [2] and [3] using a hammer
as shown .
Slide panel [10] down along the grooves between the panels [2] and
[3] as shown.
12
D
D
D
D
A
7
2
10
2
6
8
3
K
K
K
K
K
K
3
8
5
9
K

13
Dahlia Six Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
14 Drawer x6
Attach panel [1] to the unit with 6x dowels (A) and secure with 6x locking
nuts (D). Tighten with a screwdriver.Attach panel [1] to panels [5] and secure
with 4x screws (B). Tighten with a screwdriver
Insert 10x bolts (C) to panels [16] and [17]. Tighten with a screwdriver.
B
B
B
B
CC
CC
D
D
D
D
C
2
3
16 17
1
5
5
4
A
A
A
A

Dahlia Six Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
9
15 Drawer x6 16 Drawer x6
Attach panels [11], [12] and [13] to front panels [16] and [17]
using 5x locking nuts (D). Tighten with a screwdriver.
Slide panels [14] down along the grooves between panels [11]
and [12].
16 17
16 17
11
11
12
12
13
14
D
D
D
DD

Dahlia Six Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
10
17Drawer x6 18 Drawer x6
Attach panels [11], [12], [13] and [15] as shown using 10x screws (B).
Tighten with a screwdriver.
Attach slide rails (H) and slide rails (I) to the underside of the side panels
as shown. Secure with 8x screws (E) and tighten with a screwdriver.
H
E
E
I
E
E
16 17 16 17
12
15
11
11
12
B
B
B
B
B