Mocka Imogen User manual

1
Imogen Kids Single & King Single Bed
Thank you for your purchase.
Please follow the instructions below for correct assembl y.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
35mm
bolt x1
25mm
bolt x4
left
plate x2
right
plate x2
double
cap x12
25mm
bolt x8
spring
washer x8
washer
x
large allen
key x1
small allen
key x1
20mm
bolt x20
8
Assembly Instructions

Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
2
2
1
4
5
3
6
8
8
10
12
9
11
7
7
7
7
12
11
11
10
Imogen Kids Single & King Single Bed

mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
3
Imogen Kids Single & King Single Bed
L
B
T3
1b
T2
2a
2b
C
D
C
D
B
L
B
T3
C
C
F
B
F
T2
1a
1c
F
F
1
4
3
6
5
2
D
D
7
7
7
7
7
2c
7
1
Assembly Instructions
1a: Attach 1x left plate(L) to panel[3] and 1x right plate(R) to panel[4] and
secure with 4x 20mm bolts(F). Tighten with Allen Key (T2).
1b: Attach panels[3] and panels[4] to panel[1] as shown and secure with
4x spring washers(C), 4x washers(D) and 4x 25mm bolts(B). Tighten
with Allen Key (T3).
1c: Attach 2x legs[7] to panel[1] as shown.
2a: Attach 1x left plate(L) to panel[5] and 1x right plate(R) to panel[6] and
secure with 4x 20mm bolts(F). Tighten with Allen Key (T2).
2b: Attach panels[5] and panels[6] to panel[2] as shown and secure with
4x spring washers(C), 4x washers(D) and 4x 25mm bolts(B). Tighten
with Allen Key (T3).
2c: Attach 2x legs[7] to panel[2] as shown.
R
R
L
L

4
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
4a: Insert panel [9] and sit on top of the connector (10) and secure with
2x 25mm bolts (E). Tighten with Allen Key (T2).
4b: Attach 2x panel [12] to panels [1] and [2] and secure with 4x 20mm
bolts (F) as shown. Tighten with Allen Key T2).
4c: Attach panels [12] and [9] in the middle with 1x support leg [11] and
secure with 1x 35mm bolt (H). Tighten with Allen Key (T2).
4d: Attach 2x support legs (11) to panels [12] and [12] as shown and
secure with 2x 25mm bolts (E). Tighten with Allen Key (T2).
F
F
1
1
4
2
5
3
612
11 9
9
T2
4b
4c
HT2
F
T2
F
F
F
T2
E
4a
11
4d
E
T2
Imogen Kids Single & King Single Bed
10
Join the side panel[3] & panel[6] and join the side panel[4] & panel[5]
together with 2x legs(10) and secure with 8x 20mm bolts (F), Tighten
with Allen Key (T2).
12
10
11
11
2
11

Assembly Instructions
Join the bed planks together in the middle ofthe frame using 12x
double caps (A). Insert the end ofthe planks into the bed frame as
shown and attach the double caps (A)into panel [8]. Make sure the
double caps (A)click securely into place.
Lift the bed into the desired location, do not drag, You're done, enjoy!
A
5
Imogen Kids Single & King Single Bed
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
8
8
8