Mocka Kalley User manual

Kalley Dining Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions for correct assembly. While we took great
effort to ensure these assembly instructions were correct at the time of
printing, sometimes updates are required post production. For the most
up to date versions please refer to the product page on our website.
mocka.com.au/mocka.co.nz
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
x8
ABC
Hardware Supplied
bolt
x
long bolt
x16 16
nut
FG
short bolt
x8
x1
D
bracket
x1
E
Allen Key plastic
glide x4
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Phillips screwdrivers and hammer required

Kalley Dining Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
1 2
.
AA
BB
B
B
BB
BB
BB
BB
A
A
A
AA
A
AA
A
A
AE
2
3
4
5
2
2
2
Insert 4x nuts (B) into panel [3]. Attach panels [2] to panel [3],
secure with 4x long bolts (A).Tighten with an allen key (E).
Insert 8x nuts (B) into panel [5] and panel [4]. Attach panels [2] to
panels [4] and [5], secure with 8x long bolts (A).Tighten with an
allen key (E).
×
B
E

Kalley Dining Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
34
Attach panel [6] to splice panel [5] as shown.Attach panel [3] to splice panel [4] as shown.
3
6
5
4

Kalley Dining Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
65
Attach panels [3] and [4] to panel [1] secure with 8x bolts (C). Tighten with
an allen key (E).
C
C
E
CC
C
C
CC
C
6
2
2
1
4
3
A
A
BB
BB
A
A
Insert 4x nuts (B) into panel [6]. Attach panels [2] to panel [6],
secure with 4x long bolts (A).Tighten with an allen key (E).
E

Attach 1x bracket (F) to panel [5] and [6] secure with 8x short bolts (D).
Tighten with an allen key (E).Attach 4x plastic glides (G) to the legs
using a hammer as shown.
Kalley Dining Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
78
F
G
GDD
DD
GG
6
5
Once assembled lift furniture into place, do not drag.
You’re done, enjoy!
G