Mocka Alps Cabinet User manual

Alps Cabinet
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
bolt
x14
A B C D E F GHJ
K
I
Hardware Supplied
dowel
x24
screw
x6
screw
x16
bracket
x4
allen key
x1
shelf
plug
x4
screw
x4
locking
nut x14
screw
x10 x8
wedge
Phillips & Flathead screwdrivers required
LMNO P Q R
screw
x8
hinge
x4
screw
x24
cover
x2
bracket
x2
seal
x2
S
screw
x8
felt pad
x4

Alps Cabinet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
1 2
Insert 6x bolts (C) into panel [1] and tighten with a screwdriver.
Attach 2x bracket (P) to panel [1] and secure with 4x screws (E).
Place 2x cover (Q) over the bracket (P) as shown. Tighten with a
screwdriver.
.
Attach panel [15] to panel [1] secure with 4x screws (O). Tighten with
a screwdriver.
O
O
O
O
CC
C
C
C
C
E
E
PP
1
1
15
EE
Q
PP
O

Alps Cabinet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
3 4
Insert 2x bolts (C) into panels [3]. Tighten with a screwdriver. Insert 2x bolts (C) into panels [4]. Tighten with a screwdriver.
.
C
C
C
C
3
4

Alps Cabinet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
56
Attach panel [3] and [4] to panel [6] with 4x dowels (A) and secure
with 4x locking nuts (D). Tighten with a screwdriver.
Attach panel [3] and [4] to panel [1] with 4x dowels (A) and secure
with 4x locking nuts (D). Tighten with a screwdriver.
A
A
A
A
D
D
D
D
D
D
A
A
A
A
D
3
6
4
3
1
4

Alps Cabinet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
87
Slide panels [7] down along the grooves between the panels [2], [3] and [4]
as shown.
Attach panel [2] to panel [1] with 2x dowels (A) and secure
with 2x locking nuts (D). Tighten with a screwdriver.
D
A
A
1
2
4
3
2
7
7
Ensure laminated
side of panel is facing
inwards

Alps Cabinet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
910
Attach panel [8] to panels [2], [3] and [4] with 6x dowels (A) and secure
with 6x screws (B). Tighten with a screwdriver.
4
A
A
A
FF
K
FF
FF
FF
F F
S
G
G
G
G
G
G
S
A
B
B
B
B
B
B
K
K
K
H
K
8
8
9
9
9
9
9
2
2
3
4
Attach a leg bracket (G) to each leg [9] using 2x screws (S) Tighten
with a screwdriver. Attach each leg [9] to panel [8] using 16x screws (F)
as shown. Tighten with an allen key (H). Attach 4x felt pads (K) to the
ends of the legs.
front
front
back

Alps Cabinet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
11 12
Insert 4x bolts (C) into panels [10]. Tighten with a screwdriver.
Attach panels [11] to panel [10] with 4x dowels (A) and secure
with 4x screws (B). Tighten with a screwdriver.
Attach panels [12] to panel [10] with 4x locking nuts (D).Tighten with a screwdriver
B
B
B
B
10
10
11
11
C
C
C
C
A
A
A
A
pvc edge
pvc edge
10
12
A
A
pvc edge
D
D
10
12
A
A
pvc edge
D
D

Alps Cabinet
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
13
Assembly Instructions
14
M
N
N
E
E
R
R
M
N
N
M
M
N
N
M
N
N
NN
10
2
3
4
13
14
Insert panel [10] to panels [3] and [4]. Attach 4x hinges (M) to panels [13] and [14] using 8x screws (N),
and attach 2x seals (R) to panels [13] and [14] and secure with
2x screw (E). Tighten with a screwdriver.
pvc edge

15
Alps Cabinet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
9
16
M
II
N
M
N
M
N
13
14
5
2
2
3
4
Attach hinges on panels [13] and [14] to the unit using 16x screws (N).
Tighten with a screwdriver. Ensure the doors open and close easily.
If the cover (Q) is not catching on the seal (R), adjust the magnetic
end by twisting it outwards.
Insert 4x shelf plugs (I) into the unit at the desired height for the shelves
and rest the shelf panel [5] onto them. Ensure the shelves are balanced
and stable.
NOTE: If the doors are uneven or there is a gap
in the middle, loosen or tighten the screw on the
door hinge until they are sitting flush.
Q

Alps Cabinet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
10
17 18
V
Z
J
J
L
L
W
Z
wall
anchor
screw
strap
washer
Y
V
Z
W
Attach 8x wedges (J) into the corners of the back of the unit and secure
with 8x screws (L). Tighten with a screwdriver. Attach 1x safety strap (V)
to the top of the back side of the unit as shown using 1x washer (Z) and
1x screw (W). Tighten with a screwdriver.
Once assembled lift furniture into place, do not drag. Use a drill to
create a small hole lining up with the top of the safety strap (V).
Fasten to the wall using 1x washer (Z), 1x wall anchor (X) and
1x screw (Y). Ensure unit is balanced and steady before use.
You’re done, enjoy!