Mocka Brooklyn Underbed Storage Box User manual

A B C D E F
Hardware Supplied
dowel
x8
screw
x16
bolt
x16
locking
nut x16
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
wheel
x2
wheel
x2
Phillips & Flathead screwdrivers required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Brooklyn Underbed Storage Box
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Attach the two side panels [2] to the base panel [1] with 4x bolts (A), 4x
dowels (C) and secure with 4x locking nuts (B). Tighten with a
screwdriver.
Attach the front [4] and back panel [3] with 12x bolts (A), 4x dowels (C)
and secure with 12x locking nuts (B). Tighten with a screwdriver.
2
1
A
B
C
A
A
A
CC
C
B
B
B
B
B
B
B
A
C
C
C
C
A
A
A
A
A
A
A
B
2
1
4
3
2
Brooklyn Underbed Storage Box
2
mocka.co.nz | mocka.com.au
Assembly Instructions

12
Attach the two side panels [2] to the base panel [1] with 4x bolts (A), 4x
dowels (C) and secure with 4x locking nuts (B). Tighten with a
screwdriver.
Attach the front [4] and back panel [3] with 12x bolts (A), 4x dowels (C)
and secure with 12x locking nuts (B). Tighten with a screwdriver.
2
1
A
B
C
A
A
A
CC
C
B
B
B
B
B
B
B
A
C
C
C
C
A
A
A
A
A
A
A
B
2
1
4
3
2
34
Attach 2x wheels (E) and 2x wheels (F) to the underside of the box as
shown, using 16x screws (D). Tighten with a screwdriver.
Repeat steps 1 to 3 to complete the second box. You’re done, enjoy!
E
F
E
D
D
D
42
Brooklyn Underbed Storage Box
3
mocka.co.nz | mocka.com.au
Assembly Instructions