Mocka Asta Armchair User manual

x4
B
A
x4
C
DE
x4 x1
small screw long screw
nut Allen key
x8
dowel
Screwdriver required
Hardware Supplied
Asta Armchair
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Begin by assembling the metal frame for the seat. Find the middle and
longer end sections of the metal frame. Slot the end pieces into pipes
of the middle section as shown.
Find the short length end piece and slot it into the top of the middle
section as shown to complete the metal seat frame.
short length
long length
middle section
Asta Armchair
2
mocka.co.nz | mocka.com.au
Assembly Instructions

12
Begin by assembling the metal frame for the seat. Find the middle and
longer end sections of the metal frame. Slot the end pieces into pipes
of the middle section as shown.
Find the short length end piece and slot it into the top of the middle
section as shown to complete the metal seat frame.
short length
long length
middle section
34
Flip frame up as shown and carefully begin sliding on the under seat
lining. Pull the lining sleeve over the entire frame.
Pull the lining over the whole frame and fasten closed over the top using
the velcro strips.
x1
velcro strip
seat lining
Asta Armchair
3
mocka.co.nz | mocka.com.au
Assembly Instructions

56
Find the padded seat cushion. Unzip the middle opening on the back.
Slide the seat cushion over the frame and lining from the top down.
Ensure the cushion padding is on the seat-side of the frame. Open
vertical zips in lower section and stretch over and around the seat.
Zip seat cushion closed over the frame and attach velcro strips together.
Insert a skewer, screwdriver or sharp object through the ring holes in the
side of the cushion and pierce the ripstop seat lining into the holes in the
frame. Ensure the holes line up correctly.
x4
seat cushion
seat frame
& lining
Asta Armchair
Assembly Instructions
4
mocka.co.nz | mocka.com.au

Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz | mocka.com.au
56
Find the padded seat cushion. Unzip the middle opening on the back.
Slide the seat cushion over the frame and lining from the top down.
Ensure the cushion padding is on the seat-side of the frame. Open
vertical zips in lower section and stretch over and around the seat.
Zip seat cushion closed over the frame and attach velcro strips together.
Insert a skewer, screwdriver or sharp object through the ring holes in the
side of the cushion and pierce the ripstop seat lining into the holes in the
frame. Ensure the holes line up correctly.
x4
seat cushion
seat frame
& lining
78
To make up the wooden legs for the Asta chair insert two dowels (A)
into each end of both support braces. Slot into both chair legs as
shown. Secure using long screws (C) and nuts (D).
Slide seat between the chair legs and armrests. Ensure holes in the seat
cushion line up with corresponding holes in the wooden chair legs.
C
C
C
C
D
D
D
D
A
x2
A
x2
A
x2
A
x2
x4
C
D
Asta Armchair
Assembly Instructions
5
mocka.co.nz | mocka.com.au

910
Attach seat cushion and frame to the chair legs using short screws (B).
Make sure each screw passes through the holes in the cushion and
lining and into the metal frame.
Finally ensure all screws are securely tightened before use.
All done! Enjoy!
x4
B
B
B
B
B
Asta Armchair
Assembly Instructions
6
mocka.co.nz | mocka.com.au