Mocka Jesse User manual

dowel
x11
C
plastic
glide x6
D
Jesse Desk
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
bolt
x14
A B
locking
nut x14
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Phillips & Flathead screwdrivers
and hammer required
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1

Jesse Desk
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12
1
2
3
Insert 10x bolts (A) into panel [1]. Tighten with a screwdriver. Insert 4x bolts (A) into panels [2] and [3]. Tighten with a screwdriver.
A
A
A
A
A
A
A
A
A
A
A
A
AA

Jesse Desk
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
34
1
2
2
3
3
4
4
Attach panels [2] and [3] to panel [4] with 4x dowels (C)
and secure with 4x locking nuts (B). Tighten with a screwdriver.
Attach panels [2], [3] and [4] to panel [1] with 7x dowels (C)
and secure with 10x locking nuts (B). Tighten with a screwdriver.
C
B
B
B
B
C
C
C
C
C
C
C
B
B
B
B
B
B
B
B

Jesse Desk
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
56
2
3
Attach 6x plastic glides (D) into the panels [2] and [3] with
a hammer as shown. Attach 1x safety strap (V) to the back edge
of panel [1] using 1x washer (Z) and 1x screw (W). Tighten with a
screwdriver.
Once assembled lift furniture into place, do not drag. Attach the other
end of the safety straps (V). Fasten to the wall using 1x washer (Z), 1x
wall anchor (X) and 1x wall screw (Y). Ensure unit is balanced and steady
before use. You’re done, enjoy!
D
D
D
D
D
D
D
V
Z
W
V
Z
W
1
Y
Z
wall
anchor
screw
strap
washer