Mocka Luka Velvet User manual

Luka Velvet Queen Bed
1
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Thank you for your purchase.
Please follow the instructions below for correct assembly.
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
the supporting leg.
Hardware Supplied
G
25mm
screw x16
35mm
bolt x1
H
25mm
bolt x4
L
left
plate x2
R
right
plate x2
double
cap x14
A B
25mm
bolt x8
C
spring
washer x8
D
washer
x8
E
20mm
bolt x 20
F
T3
large allen
key x1
small allen
key x1
T2

Luka Velvet Queen Bed
2
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
1
8
4
11
5
11
12
12
11
9
3
6
8
2
7
7
7
7
10
10

12
Luka Velvet Queen Bed
3
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
2a: Attach 4 x legs (7) to assembled frame and secure with 16 x bolts
(G). Tighten with a screwdriver.
R
L
L
B
DC
L
F
L
1
Step
1b
Step 1a
R
2
4
5
3
6
2
2
6
7
G
1
7
7
7
7
4
5
3
6
F
10
Step 2a
Step 2b
Step 1c
Step 1d
1a: Attach 1x left plate(L) to panel[3] and 1x right plate(R) to panel[4]
and secure with 4x 20mm bolts (F) .Tighten with Allen Key (T2).
1b: Attach panels[3] and panels[4] to panel[1] as shown and secure
with 4x spring washers(C), 4x washers(D) and 4x 25mm bolts (B).
Tighten with Allen Key (T3).
1c: Attach 1x left plate(L) to panel[5] and 1x right plate(R) to panel[6]
and secure with 4x 20mm bolts (F) .Tighten with Allen Key (T2).
1d: Attach panels[5] and panels[6] to panel[2] as shown and secure
with 4x spring washers(C), 4x washers(D) and 4x 25mm bolts (B).
Tighten with Allen Key (T3).
2b:Attach 2 x legs (10) to assembled frame and secure with 8 x bolts
(F). Tighten with Allen Key (T2).

3
4
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Join the bed planks together in the middle of the frame using 14x
double caps (A). Insert the end of the planks into the bed frame as
shown and attach the double caps (A) into panel [8]. Make sure the
double caps (A) click securely into place.
Luka Velvet Queen Bed
4
86
A
88
Step 3a
F
Step 3b
Step 3c
H
12
12
11
9
11
9
11
12
E
E
11
Step 3d
3a: Insert panel [9] and sit on top of the connector [10] and secure with
2x25mm bolts(E).Tighten with Allen Key(T2).
3b: Attach 2x panel [12] to panels [1] and [2] and secure with 4x20mm
bolts (F) as shown. Tighten with Allen Key (T2).
3c: Attach panels [12] and [9] in the middle with 1x support leg [11] and
secure with 1x 35mm bolt (H). Tighten with Allen Key (T2).
3d: Attach 2x support legs [11] to panels [12] and [12] as shown and
secure with 2x 25mm bolts (E). Tighten with Allen Key (T2).
2
6
1
5
3
4
10
10

4
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Luka Velvet Queen Bed
5
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Luka Velvet Queen Bed
5
Lift the bed into the desired location, do not drag, You’re done, enjoy!