Mocka Jolt Four Drawer User manual

A B C D E F G
HJ K L MI
Hardware Supplied
dowel
x30
screw
x24
bolt
x12
locking
nut x12
small
screw x40
L + R slide
rail x8
plastic
glide x4
nail
x20
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
L + R slide
rail x8
small
bolt x20
small
locking
nut x20
x2
washer
Z
Wall
Screw
r/washer
screw
x1
Y
wall
anchor
x1
X
Safety
Strap
W
Wall Strap
VWARNING: Any furniture that is not anchored to a wall has the
potential to tip over in certain circumstances, i.e. if a child
attempts to climb up on the furniture or in the event of an
earthquake. Accordingly, we recommend that all furniture is
anchored to a wall. We supply a free safety wall anchor with all
furniture sold and we recommend these are used to prevent
your product tipping. The fixing device provided should fit most
wall types, but please note that different wall materials may
require different fixing devices from those supplied.
Phillips & Flathead screwdriver and hammer required
Jolt Four Drawer
ASSEMBLY INSTRUCTIONS
1
mocka.co.nz | mocka.com.au
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Attach 4x slide rails (F) to panel [2] and secure with 12x small screws
(E) as shown. Attach 4x slide rails (G) to panel [3] and secure with 12x
small screws (E) as shown. Tighten with a screwdriver.
Insert 10x dowels (A) and 4x bolts (C) into panel [2]. Insert 4x bolts (C)
into panel [3].
3
2
E
E
E
E
E
E
E
E
E
E
E
E
F
F
F
FF
E
E
E
E
E
E
E
E
E
E
E
E
E
G
G
G
G
E
G3
2
C
C
C
C
A
A
A
A
A
A
A
C
C
CC
A
A
Jolt Four Drawer
ASSEMBLY INSTRUCTIONS
2
mocka.co.nz | mocka.com.au

12
Attach 4x slide rails (F) to panel [2] and secure with 12x small screws
(E) as shown. Attach 4x slide rails (G) to panel [3] and secure with 12x
small screws (E) as shown. Tighten with a screwdriver.
Insert 10x dowels (A) and 4x bolts (C) into panel [2]. Insert 4x bolts (C)
into panel [3].
3
2
E
E
E
E
E
E
E
E
E
E
E
E
F
F
F
FF
E
E
E
E
E
E
E
E
E
E
E
E
E
G
G
G
G
E
G3
2
C
C
C
C
A
A
A
A
A
A
A
C
C
CC
A
A
34
Attach panels [4], [5], [6], [7] and [8] to panel [2] and secure with 4x
locking nuts (D). Tighten with a screwdriver.
Insert 10x dowels (A) into the tops of panels [4], [5], [6], [7] and [8].
Attach panel [3] and secure with 4x locking nuts (D). Tighten with a
screwdriver.
8
7
6
5
4
3
2
D
4
D
DD
2
6
5
4
4
D
D
D
A
A
A
A
A
A
A
A
D
4
8
7
4
A
A
Jolt Four Drawer
ASSEMBLY INSTRUCTIONS
3
mocka.co.nz | mocka.com.au

56
Insert 4x bolts (C) into panel [1]. Insert 6x dowels (A) into the tops of the side panels and attach panel [1].
Secure with 4x locking nuts (D) and tighten with a screwdriver.
1
C
C
C
C
1
D
DD
D
A
A
AA
Jolt Four Drawer
ASSEMBLY INSTRUCTIONS
4
mocka.co.nz | mocka.com.au

Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz | mocka.com.au
56
Insert 4x bolts (C) into panel [1]. Insert 6x dowels (A) into the tops of the side panels and attach panel [1].
Secure with 4x locking nuts (D) and tighten with a screwdriver.
1
C
C
C
C
1
D
DD
D
A
A
AA
78
Turn the unit carefully on its front. Attach panels [9] to the back of the
unit with the connector [10] and secure using 20x nails (M) and a
hammer. Attach 4x plastic glides (L) to the bottom of the unit as shown.
Turn the completed unit back onto its base and you’re ready to assemble
the drawers!
10
3
2
9
9
L
L
L
L
M
M
L
Jolt Four Drawer
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz | mocka.com.au

910
Insert 5x small bolts (J) and 1x dowel (A) into panel [11]. Attach panels [12], [13] and [14] to panel [11] with 5x small locking nuts
(K) and tighten with a screwdriver.
13
12 14
A
J
J
JJ
J
K
K
K
K
K
Drawers x4
11
11
Jolt Four Drawer
ASSEMBLY INSTRUCTIONS
6
mocka.co.nz | mocka.com.au

910
Insert 5x small bolts (J) and 1x dowel (A) into panel [11]. Attach panels [12], [13] and [14] to panel [11] with 5x small locking nuts
(K) and tighten with a screwdriver.
13
12 14
A
J
J
JJ
J
K
K
K
K
K
Drawers x4
11
11
11 12
Slide panel [15] between the grooves of panel [12] and [13] to form the
drawer base.
Attach panel [16] to the rest of the drawer using 6x screws (B) and
tighten with a screwdriver.
13
12
11
15
B
B
B
13
12
11
16
Jolt Four Drawer
ASSEMBLY INSTRUCTIONS
7
mocka.co.nz | mocka.com.au

13 14
Attach the left and right slide rails (H) and (I) to the bottom sides of the
drawer and secure with 4x small screws (E). Tighten with a
screwdriver.
Insert the completed drawers, ensuring they slide easily along the rails.
H
IE
E
E
E
E
E
H
I
E
E
12
13
Jolt Four Drawer
ASSEMBLY INSTRUCTIONS
8
mocka.co.nz | mocka.com.au

13 14
Attach the left and right slide rails (H) and (I) to the bottom sides of the
drawer and secure with 4x small screws (E). Tighten with a
screwdriver.
Insert the completed drawers, ensuring they slide easily along the rails.
H
IE
E
E
E
E
E
H
I
E
E
12
13
15 16
Lay the unit carefully on its front and attach the safety strap (V) to the
top of the back side of the unit using 1x (Z) washer and 1x screw (Y).
Tighten with a screwdriver. Once assembled lift furniture into place, do
not drag.
Move the unit into the desired location up against a wall. Use a drill to
create a small hole lining up with the top of the safety strap (V). Fasten
to wall using 1x wall anchor (X), 1x washer (Z) and 1x screw (W). Ensure
unit is balanced and steady before use. You’re done, enjoy!
x1
wall
anchor
wall
screw
Washer
Strap
V
X
Z
W
Wall Strap
Y
V
r/washer
screw
V
washer
Z
Jolt Four Drawer
ASSEMBLY INSTRUCTIONS
9
mocka.co.nz | mocka.com.au