Mocka Replica Eames Lounge Chair & Ottoman User manual

A B C D
E F GH
J K LI
Hardware Supplied
cylinder
x2
ottoman
base x1
legs
x2
chair
base x1
chair
seat x1
ottoman
cushion x1
steel
bracket x2
30mm
bolt x8
15mm
bolt x8
20mm
bolt x4
arm
rest x2
chair back
rest x1
allen
key x1
M
Replica Eames Lounge Chair & Ottoman
ASSEMBLY INSTRUCTIONS
1
mocka.co.nz | mocka.com.au
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Place the ottoman cushion (G) upside-down on a clean, soft and level
surface. Attach ottoman base (C) to cushion (G) using 4x 30mm bolts
(J). Tighten with the allen key (M).
Fit the top of the long cylinder (B) (there are two cylinders - use the long
one) into the ottoman base (C) as shown. Fit legs (A) onto the cylinder
(B) and press down to fit into place. Carefully turn the ottoman over onto
its feet. Ottoman weight limit = 110kg.
J
J
J
J
C
G
C
G
B (long)
A
Ottoman Assembly
M
Replica Eames Lounge Chair & Ottoman
ASSEMBLY INSTRUCTIONS
2
mocka.co.nz | mocka.com.au

12
Place the ottoman cushion (G) upside-down on a clean, soft and level
surface. Attach ottoman base (C) to cushion (G) using 4x 30mm bolts
(J). Tighten with the allen key (M).
Fit the top of the long cylinder (B) (there are two cylinders - use the long
one) into the ottoman base (C) as shown. Fit legs (A) onto the cylinder
(B) and press down to fit into place. Carefully turn the ottoman over onto
its feet. Ottoman weight limit = 110kg.
J
J
J
J
C
G
C
G
B (long)
A
Ottoman Assembly
M
34
Join the chair back rest (F) to the chair seat (E) by attaching the left [L]
and right [R] steel brackets (I) as shown. Secure using 8x 15mm bolts
(K) and tighten with the allen key (M).
Attach the left and right arm rests (H) to the brackets (I) using 4x 20mm
bolts (L) and tighten with the allen key (M). Zip tabs to the back on each
side.
Chair Assembly
F
I
K
E
I
K
LL
L
H
(right)
H
(left)
M
M
L
L
R
R
R
LL
Replica Eames Lounge Chair & Ottoman
ASSEMBLY INSTRUCTIONS
3
mocka.co.nz | mocka.com.au

56
Roll the chair onto its front and attach the chair base (D) using 4x
30mm bolts (J). Tighten with the allen key (M).
Attach the short cylinder (B) to the chair base (D). Attach the legs (A)
onto the bottom of the cylinder (B) as shown.
J
JJ
J
B (short)
A
D
D
Replica Eames Lounge Chair & Ottoman
ASSEMBLY INSTRUCTIONS
4
mocka.co.nz | mocka.com.au

Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz | mocka.com.au
56
Roll the chair onto its front and attach the chair base (D) using 4x
30mm bolts (J). Tighten with the allen key (M).
Attach the short cylinder (B) to the chair base (D). Attach the legs (A)
onto the bottom of the cylinder (B) as shown.
J
JJ
J
B (short)
A
D
D
78
Turn the chair over onto its feet ensure it is steady before use. Chair
weight limit = 160kg.
Check the bolts regularly to ensure they are tight so the chair remains
nice and sturdy. You’re done, enjoy!
Replica Eames Lounge Chair & Ottoman
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz | mocka.com.au