Mocka Sadie User manual

mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Sadie
Queen bed
Thank you for your purchase.
Please follow the instructions below for correct assembly
WARNING: Any furniture that is not anchored to a wall has
the potential to tip over in certain circumstances, i.e. if a
child attempts to climb up on the furniture or in the event
of an earthquake. Accordingly, we recommend that all
furniture is anchored to a wall. We supply a free safety
wall anchor with all furniture sold and we recommend
these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please
note that dierent wall materials may require dierent
fixing devices from those supplied.
Hardware Supplied
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
screw
x50
washer
x12
large
Allen Key
x1
Phillips & hammer required.
long bolt
x14
small
Allen Key
x1
adjuster
x2
elbow
connector
x4
connector
flat
x4
bolt
x12
A B C D E
F G H J
K
screw
x20
ML
I
x2
bolt
N
dowel
x10
locking
nut x2
plastic
glide x6

Sadie
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
21
Queen bed
2
Attach panel [1] to panel [2] with 6x dowels (D). Attach panels [3] to panels [1] and [2] and secure with 12x long bolts (C)
and 12x washers (F). Tighten with an small Allen Key (B).
1
1
3
3
2
2
C
F
F
F
F
FF
FF
F
F
FF
C
C
C
CC
C
C
C
C
CC
C
B
F
D
D
D
D
D
D

Sadie
Queen bed
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Attach 2x flat connectors (I) to panel [1] and secure with 8x
screws (A). Tighten with a screwdriver. Attach 3x plastic
glides (K) to panel [1] with a hammer.
3 4
Insert 1x bolt (N) into panel [4] and tighten with a screwdriver.
Attach 2x elbow connectors (H) to panel [4] and secure with 8x
screws (M). Tighten with a screwdriver.
1
4
2
M
H
M
H
M
H
A
I
A
I
N
K
K
K

mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Sadie
Queen bed
5 6
Insert 1x bolt (N) into panel [5] and tighten with a screwdriver.
Attach 2x elbow connectors (H) to panel [5] and secure with
8x screws (M). Tighten with a screwdriver.
Attach 2x flat connectors (I) to panel [6] and secure with 8x
screws (A). Tighten with a screwdriver.
5
6
M
H
M
H
M
H
A
I
A
I
A
I
N

Sadie
Queen bed
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Attach panels [4] and [5] to panel [7] with 4x dowels (D) and
secure with 2x locking nuts (L). Tighten with a screwdriver.
Attach 3x plastic glides (K) to panel [7] with a hammer.
Attach 4x panels [11] to panels [4] and [5] and secure with 8x
screws (A). Tighten with a screwdriver.
7 8
4
4
55
11
11
7
D
L
K
K
K
L
D
L
A
A
A
A
D
11
11

Sadie
Queen bed
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Attach panel [6] to panels [4] and [5] and secure with 6x bolts (G).
Tighten with the large Allen Key (J).
Attach panel [4] and [5] to panel [1] and secure with 6 x Bolts (G).
Tighten with the large Allen Key (J).
109
1
4
5
6
4
5
H
G
G
G
J
J
I
I
I
H
H
I
I
I

11
Sadie
Queen bed
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Attach 2x panels [9] to panel [8] with 2x Long Bolts (C) and secure
with the small Allen Key (B). Insert the 2x adjusters (E) into the
bottom of panels [9] as shown.
Attach panel [8] to panels [1] and [6] and secure with 4x screws (M) as shown.
Tighten with a screwdriver. Once assembled lift the bed into place, do not drag.
Once in the correct position, rotate the adjusters (E) to the floor level.
Ensure the unit is balanced and steady before use.
12
E
C
B
E
C
B
8
9
9
1
6
M
M
M
M
E
E
M
M
8
E

13
Sadie
Queen bed
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Attach 13x panels [10] to panels [4] and [5] and secure with 26 x
Screws (A). Tighten with a screwdriver.
You're done, enjoy!
14
4
5
A
A
10
3