Mocka Mischa Buffet User manual

Mischa Buffet
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
Hardware Supplied
dowel
x20
bolt
x24
screw
x12
locking
nut x24
small
screw x32
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
A B CD E
NM
L
K
J
I
HG
F
wedge
x8
screw
x8
long
scerw x8
screw
x8
timber
screw x28
T U A1 A2 A3 A4 A5
Wall Strap
Z
Y
XWV
magnetic
x2
hinge
x4
safety
strap
x2
screw
x2
wall
anchor
x2
wall
screw
x2
washer
x4
magnetic
bar x2
shelf plug
x8
height
adjuster
x2
small bolt
x16
O
handle
bolt x10
handle
x5
PQ R
S
felt
pad x4
leg
bracket x4
Allen key
x1
long bolt
x4
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Phillips & Flathead screwdrivers
and hammer required
slide rail
x3
slide rail
x3
slide rail
x3
slide rail
x3

Mischa Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12
Attach 3x slide rails (F) to panel [5] and secure with 9x small screws (E).
Attach 3x slide rails (G) to panel [6] and secure with 9x small screws (E).
Tighten with a screwdriver. Insert 4x bolts (C) into panels [5] and [6].
Tighten with a screwdriver.
5
1
6
Insert 8x bolts (C) into panel [1]. Tighten with a screwdriver.
Attach 2x magnetic (A1) to panel [1] and secure with 4x timber
screw (U). Tighten with a screwdriver.
G
CR
E
F
CL
E
C
C
C
C
C
C
C
C
U
A1
C
C
C
C
E
E
E
E
E
E
E
E
E
E
E
E
E
G
G
G
F
F
F
E
EE
E
EU
A1
UU
A1

Mischa Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
3 4
Attach panels [3], [4], [5] and [6] to panel [1] and secure with 8x locking nuts (D)
and 8x dowels (A). Tighten with a screwdriver.
1
6
6
55
3
4
7
7
Attach panels [5] and [6] to panels [7] and secure with
4x locking nuts (D) and 4x dowels (A). Tighten with a screwdriver.
A
A
A
D
D
D
D
A
A
A
A
A
A
A
A
AD
D
D
D
D
D
D

Mischa Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
6
6
8
8
8
2
5
3
4
5
Slide panels [8] down along the grooves of the side panels to
form the back of the unit.
Attach panel [2] to the rest of the unit using 8x dowels (A).
Secure with 8x long screws (M) and tighten with a screwdriver.
M
M
A
M
M
A
M
M
A
M
M
A
A
M

Mischa Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
7 8
2
9
9
9
9
10
Attach a leg bracket (Q) to each leg [9] using 2x screws (T) and 1x long
bolt (S). Tighten with a screwdriver and an Allen key (R). Attach each leg
[9] to panel [2] using 4x small bolts (J) as shown. Tighten with the Allen
key (R). Attach 4x felt pads (P) to the ends of the legs.Attach 2x support
legs [10] to panel [2] as shown. Screw the height adjusters (A5) onto the
support legs [10].
Attach 4x hinges (A3) to panels [11] and [12] using 8x timber screws (U). Attach
2x magnetic bars (A2) to panels [11] and [12] and secure with 2x screws (E).
Attach 2x handle (O) to panels [11] and [12] secure with 4x handle bolt (N).
Tighten with a screwdriver.
front
back
S
Q
TT
front
R
UU
UU
UU
N
N
N
O
O
N
E
E
A3
A3
A3
A2
A2
R
J
J
P
J
J
J
J
P
A5
A5
P
P
P
UU
A3
10
12
11
UU
A3

Mischa Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
910
Attach door hinges on panels [3] and [4] to the unit using 16x timber screws
(U). Tighten with a screwdriver. Ensure the doors open and close easily.
Insert 8x shelf plugs (A4) into the unit at the desired height for the
shelves and rest the shelf panels [13] onto them. Ensure the shelves
are balanced and stable.
UA3
A3
A4
A4
U
NOTE: If the doors are uneven or
there is a gap in the middle, loosen
or tighten the screw on the door
hinge until they are sitting flush.
A3
U
12
13
13
4
4
5
6
11
3
3

Mischa Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
12 Drawer x 311 Drawer x 3
Insert 12x bolts (C) into panels [14]. Tighten with a screwdriver. Attach panels [15] and [16] to panel [14] and secure
with 12x locking nuts (D). Tighten with a screwdriver.
C
C
C
C
D
D
D
D
14
14
15
16

Mischa Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
13 Drawer x 3 14 Drawer x 3
Slide panel [17] along the grooves between the panels [15]
and [16] to form the base of the drawer.
Attach panels [15], [16] and [18] as shown using 12x screws (B).
Tighten with a screwdriver.
B
B
B
B
15
15
17
16 16
18

Mischa Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
9
15 Drawer x 3 16 Drawer x 3
Attach slide rails (I) and slide rails (H) to the underside of the side panels
as shown. Secure with 12x screws (E) and tighten with a screwdriver.
Attach 3x handles (O) to panels [14] and secure with 6x handle bolts (N).
Tighten with a screwdriver.
E
E
H
E
E
I
N
N
O
15
16
14

1
8
8
8
V
Z
W
K
L
Mischa Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
10
17 18
Insert the assembled drawers into the corresponding compartments
as shown. Ensure the drawers slide easily along the rails.
Attach 8x wedges (K) into the corners of the back of the unit and secure
with 8x screws (L). Tighten with a screwdriver.Attach 2x safety straps (V)
to the top of the back side of the unit as shown using 2x washers (Z) and
2x screws (W). Tighten with a screwdriver.
K
L
V
Z
W
V
Z
W