Mocka Jesse User manual

Jesse Four Drawer
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
Hardware Supplied
dowel
x22
bolt
x46
screw
x20
locking nut
x46
small screw
x40
cam bolt
x4
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
A B CD E
N
ML
K
J
IHG
F
cam nut
x4
wedge
x8
screw
x8
long screw
x4
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
CL runner tracks
x4
CR runner tracks
x4
DL runners
x4
DR runners
x4
plastic
glide x4
O
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Phillips & Flathead screwdrivers
and hammer required

Jesse Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12
E
E
E
EG
E
E
E
EG
G
E
E
EG
E
E
F
F
EE
E
F
EE
E
F
E
2
3
CR
CL
C
2
3
C
C
C
C
C
Attach 4x CL runner tracks (F) and 4x CR runner tracks (G) to panels
[2] and [3] as shown with 24x screws (E). Tighten with a screwdriver.
Insert 10x bolts (C) into panels [2] and [3]. Tighten with a screwdriver.
E
E
F
E
E
E
EG
C
C
C
C

Jesse Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
34
3
6
7
5
D
D
D
D
D
D
C
C
1
C
C
2
Insert 4x bolts (C) into panel [1]. Tighten with a screwdriver. Attach panels [5] ,[6] and [7] to panel [2] and [3] with 10x dowels (A)
and secure with 10x locking nuts (D). Tighten with a screwdriver.
A
5
D
D
A
A
A
A
A
A
5
D
D
DA

Jesse Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
56
Slide panels [8] down along the grooves between the panels
[2], [3] and [6] to form the back of the unit as shown.
Attach panel [1] to the unit with 4x dowels (A) and secure with 4x
locking nuts (D). Tighten with a screwdriver.
3
2
6
8
A
A
A
3
2
1
D
D
D
D
A

Jesse Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
78
Slide panels [8] down along the grooves between the panels [2],
[3] and [6] to form the back of the unit as shown. Attach panel [4]
to the unit with 4x dowels (A) and secure with 4x long screws (J).
Tighten with a screwdriver.
Insert 8x bolts (C) into panel [4]. Tighten with a screwdriver.
4
C
C
C
C
C
C
C
C
A
J
J
A
A
J
J
2
3
4
6
8

Jesse Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
910
C
A
10
11
12
C
A
D
D
Insert 2x dowels (A) and 2x bolts (C) into panels [11] and [12].
Attach panels [10] , [11] and [12] using 2x locking nuts (D).
Tighten with a screwdriver.
Attach panels [11] and [12] to panels [9] using 4x cam bolt (K) and
secure with 4x cam nuts (L). Tighten with a screwdriver.
K
K
K
K
K
L
L
L
L
L
9
11
9
12
12
11
D
x2

Jesse Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
11 12
C
C
C
C
C
13
Attach leg panels to bottom panel [4] with 8x locking nuts (D).
Tighten with a screwdriver. Attach 4x plastic glides (O) into
the panels with a hammer as shown.
Insert 5x bolts (C) into panel [13]. Tighten with a screwdriver.
D
D
D
D
D
4
9
9
10
10
Drawers x4
O
O
O
O
O

Jesse Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
13
14
D
D
D
D
D
13
14
15
17
13
16
14
15
Attach panel [14], [15] and [17] to front panel [13] using 5x locking
nuts (D). Tighten with a screwdriver.
Slide panel [16] along the grooves between the side panels [14]
and [15] to form the base of the drawer.
D
Drawers x4Drawers x4

Jesse Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
9
15 16
B
B
B
BB
14
15
18
Attach panels [14], [15] and [18] as shown using 5x screws (B).
Tighten with a screwdriver.
Attach DR runners (I) and DL runners (H) to the underside of panels
[14] and [15] as shown. Secure with 4x screws (E) and tighten with
a screwdriver.
Drawers x4Drawers x4
14
15
H
I
E
E
E
E

Jesse Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
10
17 18
Insert the assembled drawers into the corresponding compartments
as shown. Ensure the drawers slide easily along the rails.
Attach 8x wedges (M) into the corners of the back of the unit
and secure with 8x screws (N). Tighten with a screwdriver.
M
N
M
N
M
N
M
N
8
8

Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
11
19 20
X
Y
Z
Attach 1x safety strap (V) to the top of the back side of the unit
as shown using 1x washer (Z) and 1x screw (W). Tighten with
a screwdriver.
Once assembled lift furniture into place, do not drag. Use a drill to create
a small hole lining up with the top of the safety strap (V). Fasten to the wall
using 1x washer (Z), 1x wall plug (X) and 1x screw (Y). Ensure unit is
balanced and steady before use. You’re done,enjoy!
V
Z
W
X
Y
Z
V
Z
W
1
Jesse Four Drawer