Mocka Freestanding Coat and Hat Stand User manual

mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY INSTRUCTIONS
Mocka Freestanding Coat and Hat Stand
Thank you for purchasing Mocka Freestanding Coat and Hat Stand. Please follow the
manufacturer’s assembly instructions in detail.
A
HARDWARE SUPPLIED
x1
stand
(top)
E
x2
pole
F
x1
pole
J
x1
allen key
K
x4
foot cushions
G
x8
pegs
H
x1
bolt
B
x1
stand
(bottom)
C
x1
pole
D
x1
pole

mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY INSTRUCTIONS
Mocka Freestanding Coat and Hat Stand
1 2
Slide together 1 x stand (A) and 1 x stand (B) as shown. Attach 1 x pole (C) to assembled frame and secure with 1 x bolt (H). Tighten with
an Allen Key (J).
A
BC
H
J

mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY INSTRUCTIONS
Mocka Freestanding Coat and Hat Stand
3 4
Please clean the wood before you paste the plastic pieces onto the base. Attach
4 x feet cushions (K) to assembled frame as shown.
Screw 1 x pole (D) into assembled frame as shown.
D
K
K
K
K

mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY INSTRUCTIONS
Mocka Freestanding Coat and Hat Stand
5 6
Screw 2 x poles (E) into assembled frame as shown. Screw 1 x pole (F) into assembled frame as shown.
E
F
E

mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY INSTRUCTIONS
Mocka Freestanding Coat and Hat Stand
7 8
Attach 8 x pegs (G) into assembled frame as shown. Once assembled lift furniture into place, do not drag. Ensure unit is
balanced and steady before use. You’re done, enjoy!
G
G
G
G
G
G
G
G