Mocka Kids Armchair User manual

Screwdriver required
Hardware Supplied
Warning: Small parts and sharp points are used to assemble the
Kids Armchair and should only be assembled by an adult. Keep all
assembly parts away from small children.
x4
B
A
x4
C
DE
x4 x1
small screw
long screw
nut Allen key
x4
dowel
Kids Armchair
1
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroocydore BC, QLD, 4558
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
Regularly check screws during use to ensure they are tight for safety. Use
a damp cloth for cleaning.
Do not screw all screws tight until completion.
Suitable for ages 18 months +

12
Begin by assembling the metal frame for the seat. Find the back and
seat sections of the metal frame.
Slot the two pieces together as shown. Ensure the frame is rigidly
connected.
seat section
back section
Kids Armchair
2
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroocydore BC, QLD, 4558 | PO BOX 6171, Maroocydore BC, QLD, 4558
Assembly Instructions

12
Begin by assembling the metal frame for the seat. Find the back and
seat sections of the metal frame.
Slot the two pieces together as shown. Ensure the frame is rigidly
connected.
seat section
back section
34
Flip frame up as shown and carefully begin sliding on the under-seat
lining. Slide the lining sleeve up over the frame.
Pull the lining over the whole frame and fasten closed
over the top using the velcro strips.
x1
velcro strip
under-seat
lining
Kids Armchair
3
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroocydore BC, QLD, 4558 | PO BOX 6171, Maroocydore BC, QLD, 4558
Assembly Instructions

56
Find the padded seat cushion. Slide the top of seat cushion over the
top of the frame and lining. Pull the ap at the bottom of the cushion
down over and around the seat.
Insert a skewer, screw or sharp object through the ring holes in the side
of the frame, carefully piercing the under-seat lining. Ensure the 4 holes
line up correctly.
x4
seat cushion
seat frame and lining
Kids Armchair
Assembly Instructions
4
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroocydore BC, QLD, 4558

Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz | mocka.com.au
56
Find the padded seat cushion. Slide the top of seat cushion over the
top of the frame and lining. Pull the ap at the bottom of the cushion
down over and around the seat.
Insert a skewer, screw or sharp object through the ring holes in the side
of the frame, carefully piercing the under-seat lining. Ensure the 4 holes
line up correctly.
x4
seat cushion
seat frame and lining
78
To make up the wooden legs for the Armchair insert one dowel (A) into
each end of both support braces. Slot into the chair legs as shown.
Loosely fasten using long screws (C) and nuts (D).
Slide seat between the chair legs and armrests. Ensure holes in the seat
frame line up with corresponding holes in the wooden chair legs.
x4
C
D
CD
A
C
A
CD
A
C
D
A
D
Kids Armchair
Assembly Instructions
5
mocka.co.nz | mocka.com.au
| PO BOX 6171, Maroocydore BC, QLD, 4558

910
Attach seat cushion and frame to the chair legs using short screws (B).
Make sure each screw passes through the holes in the lining and into
the metal frame.
Finally ensure all screws are securely tightened before use.
All done! Enjoy!
B
B
B
B
x4
B
Kids Armchair
Assembly Instructions
6
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroocydore BC, QLD, 4558