Mocka Jordi Desk User manual

WARNING: Any furniture that is not anchored to a wall has the potential to
tip over in certain circumstances, i.e. if a child attempts to climb up on the
furniture or in the event of an earthquake. Accordingly, we recommend that
all furniture is anchored to a wall. We supply a free safety wall anchor with
all furniture sold and we recommend these are used to prevent your product
tipping. The fixing device provided should fit most wall types, but please
note that different wall materials may require different fixing devices from
those supplied.
x1
washer
Z
Wall
Screw
r/washer
screw
x1
Y
wall
anchor
x1
X
Safety
Strap
W
partSllaW
Hardware Supplied
x2
B
A
x16
CD
EF G
x2
x4
x16
x8
x8
10 mm
L + R L + R
bolt
locking nut
dowel long screw
small screw
25 mm
Phillips & Flathead screwdrivers required
Jordi Desk
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Screw bolts (A) into holes in panels [1] and [2]. Slot together with panel
[3] and [4] as shown. Place 4x locking nuts (B) into in both panel [3] and
[4]. Lock and tighten with screwdriver.
Attach 2x slide rails (F) in place on panels [1] and [2] using 2x small
screws (E) in each rail bracket. Fasten all screws with a screwdriver.
A
E
F
2
1
3
4
A
x4
A
A
x4
E
F
A
A
A
E
B
B
B
E
A
A
A
x4
B
BB
BB
Jordi Desk
2
mocka.co.nz | mocka.com.au
Assembly Instructions

12
Screw bolts (A) into holes in panels [1] and [2]. Slot together with panel
[3] and [4] as shown. Place 4x locking nuts (B) into in both panel [3] and
[4]. Lock and tighten with screwdriver.
Attach 2x slide rails (F) in place on panels [1] and [2] using 2x small
screws (E) in each rail bracket. Fasten all screws with a screwdriver.
A
E
F
2
1
3
4
A
x4
A
A
x4
E
F
A
A
A
E
B
B
B
E
A
A
A
x4
B
BB
BB
34
Screw in 4x bolts (A) and insert 4x dowels (C) into holes in top panel
[5]. Slot together with the rest of the structure. Place locking 4x locking
nuts (B) into hole in the side panels.
Tighten all nuts with a screwdriver.The desk unit is all done. Ensure
screws are tight before proceeding with the drawer assembly.
A
C
B
5
A
Bx4
x4
C
A
B
B
CA
C
C
Jordi Desk
3
mocka.co.nz | mocka.com.au
Assembly Instructions

56
Attach side panels [6] and [7] to back panel [8] using 4x long screws (D)
in the holes provided and tighten with a screwdriver.
Slide the base panel [9] into place in the grooves in side and back
panels. Insert 2x dowels (C) into both ends of support piece [11] and fit
into back panel as shown.
Drawers
D
D
D
6
7
8
9
Cx2
Cx2
D
x4
11
Jordi Desk
Assembly Instructions
4
mocka.co.nz | mocka.com.au

Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz | mocka.com.au
56
Attach side panels [6] and [7] to back panel [8] using 4x long screws (D)
in the holes provided and tighten with a screwdriver.
Slide the base panel [9] into place in the grooves in side and back
panels. Insert 2x dowels (C) into both ends of support piece [11] and fit
into back panel as shown.
Drawers
D
D
D
6
7
8
9
Cx2
Cx2
D
x4
11
78
Screw 4x bolts (A) into the front panel [10] and attach to the side panels
using 4x locking nuts (B). Tighten with a screwdriver.
Finally, attach 2x rail components (G) to both left and right side of the
drawer using 4x screws (E). Check all screws are securely fastened.
A
A
A
G
E
E
GE
Bx4
A
x4
B
10
B
B
B
A
Jordi Desk
Assembly Instructions
5
mocka.co.nz | mocka.com.au

910
Lift and slide the completed drawer into place on the rails in the desk
unit as shown.
Ensure the drawer can easily slide open and close.
Jordi Desk
Assembly Instructions
6
mocka.co.nz | mocka.com.au

910
Lift and slide the completed drawer into place on the rails in the desk
unit as shown.
Ensure the drawer can easily slide open and close.
11
12
Attach safety strap (W) to the top of the back side of the unit using
screw (Y). Tighten with a screwdriver. Once assembled lift furniture
into place, do not drag.
Move the unit into the desired location up against a wall. Use a drill to
create a small hole lining up with the top of the safety strap (W). Fasten
to wall using wall anchor (X), washer (Z) and a wall screw. Ensure unit is
balanced and steady before use. You’re done, enjoy!
Y
W
X
Z
Wx1
wall
anchor
wall
screw
Washer
Strap
Safety Strap
r/washer
screw
w
Jordi Desk
Assembly Instructions
7
mocka.co.nz | mocka.com.au