Mocka Ladder Shelf User manual

B
AC
x24
nut
D
x4
screw
x8
dowel
x24
bolt
Hardware Supplied
WARNING – This is not a ladder. Please do not climb or
step on this product.
x1
washer
Z
Wall
Screw
r/washer
screw
x1
Y
wall
anchor
x1
X
Safety
Strap
W
Wall Strap
WARNING: Any furniture that is not anchored to a wall has the
potential to tip over in certain circumstances, i.e. if a child attempts to
climb up on the furniture or in the event of an earthquake. Accordingly,
we recommend that all furniture is anchored to a wall. We supply a
free safety wall anchor with all furniture sold and we recommend these
are used to prevent your product tipping. The fixing device provided
should fit most wall types, but please note that different wall materials
may require different fixing devices from those supplied.
Phillips & Flathead screwdrivers required
E
covers x24
screw
Ladder Shelf
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
To begin, insert 2x dowels (C) and 2x nuts (B) into each ladder rung.
Then attach each rung to the ladder rear sides using bolts (A).
Ensure all bolt connections are tightened with a screwdriver.
A
C
A
B
x8
A
B
B
A
C
A
B
B
A
C
A
B
B
A
C
A
B
B
C
C
C
C
Ladder Shelf
2
mocka.co.nz | mocka.com.au
Assembly Instructions

12
To begin, insert 2x dowels (C) and 2x nuts (B) into each ladder rung.
Then attach each rung to the ladder rear sides using bolts (A).
Ensure all bolt connections are tightened with a screwdriver.
A
C
A
B
x8
A
B
B
A
C
A
B
B
A
C
A
B
B
A
C
A
B
B
C
C
C
C
34
Attach the two side braces to the ladder using 4x screws (D). Tighten
all screws with a screwdriver.
Rotate ladder shelf around. Fit the top panel into position between the
two braces. Insert 4x nuts (B) into panel and fasten using 4x bolts (A).
Tighten with a screwdriver.
A
A
A
A
D
D
D
D
side brace
x2
ladder
x2
D
B
B
B
x4
A
B
Ladder Shelf
3
mocka.co.nz | mocka.com.au
Assembly Instructions

56
Fit the second panel into position between the two braces. Insert 4x
nuts (B) into panel and fasten using 4x bolts (A). Tighten with a
screwdriver.
Fit the third panel info position between the two braces. Insert 4x nuts (B)
into panel and fasten using 4x bolts (A). Tighten with a screwdriver.
A
A
A
A
A
A
A
A
B
B
B
x4
A
B
B
B
B
x4
A
B
Ladder Shelf
Assembly Instructions
4
mocka.co.nz | mocka.com.au

Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz | mocka.com.au
56
Fit the second panel into position between the two braces. Insert 4x
nuts (B) into panel and fasten using 4x bolts (A). Tighten with a
screwdriver.
Fit the third panel info position between the two braces. Insert 4x nuts (B)
into panel and fasten using 4x bolts (A). Tighten with a screwdriver.
A
A
A
A
A
A
A
A
B
B
B
x4
A
B
B
B
B
x4
A
B
78
Fit the bottom panel into position between the two braces. Insert 4x
nuts (B) into panel and fasten using 4x bolts (A). Tighten with a
screwdriver.
Ensure all screws and bolts are securely tightened before and during
use. Cover the screw holes with 24x screw covers (E).
A
A
A
A
B
B
B
x4
A
B
EE
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
Ladder Shelf
Assembly Instructions
5
mocka.co.nz | mocka.com.au

910
Once assembled lift furniture into place, do not drag. Attach safety
strap (W) to the top of the back side of the ladder using screw (Y).
Tighten with a screwdriver.
Move the ladder into the desired location up against a wall. Use a drill to
create a small hole lining up with the top of the safety strap (W). Fasten
to wall using wall anchor (X), washer (Z) and a wall screw. Ensure unit is
balanced and steady before use. You’re done, enjoy!
Wall Strap
Y
W
r/washer
screw
W
X
Z
W
x1
wall
anchor
wall
screw
Washer
Strap
Ladder Shelf
Assembly Instructions
6
mocka.co.nz | mocka.com.au