Mocka Two Door Storage Locka User manual

Phillips screwdriver required
WARNING: Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
A B D
Hardware Supplied
handle
x2
bolt
x4
E
wall mount
kit x1
F
clip
x4
washer
x4
G
door hinge
x2
H
door lock
x2
C
small screw
x4
Two Door Storage Locka
1
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Slide the legs [3] into the bottom of panels [1] and [2] until they click into
place.
2
1
CLICK!
CLICK!
3
3
2
1
Two Door Storage Locka
2
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions

34
Slide the legs [4] into the bottom of panels [1] and [2] until they click into
place.
Attach panel [5] to panels [1] and [3] as shown.
4
3
CLICK!
CLICK!
2
1
2
1
4
3
5
Two Door Storage Locka
3
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions

56
Attach panel [6] between panels [2], [3] and [5] as shown. Secure the bottom panel [7] by clicking into place as shown.
7
6
2
1
5
2
1
Two Door Storage Locka
Assembly Instructions
4
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
3

Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
78
Attach the top panel [8] as shown. Secure the top panel [8] by clicking into place as shown.
8
7
65
2
1
8
2
Two Door Storage Locka
Assembly Instructions
5
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

910
Insert 4x clips (A) into the back and front clip brackets at your desired
shelf height as shown.
Place panel [9] into the unit over the clips to form the shelf.
8
65
2
1
x4
A
A
8
9
Two Door Storage Locka
Assembly Instructions
6
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

11
12
Two Door Storage Locka
Assembly Instructions
7
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
2 x
10
11 E
D
D
G
G
B
B
C
C
C
Attach handle (E) to panels [10] and [11] with 4x bolts (D).
Insert 4 x small screws (C) and 4 x washers (B) into panels [10]
and [11] as shown. Tighten with a screwdriver.
Attach 2 x door hinge (G) to base as shown. Ensure it is facing in the
correct direction.

13 14
Attach panel [10] to door hinge (G) as shown. Attach 1 x door lock (H) into panel [10] as shown, ensuring it clicks into place.
Repeat steps 13 to 14 for the second door panel [11].
Two Door Storage Locka
Assembly Instructions
8
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
10
CLICK!
H
H
H
10

15
9
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Two Door Storage Locka
16
Lift the completed unit into place, do not drag. Mark its height on the
wall with a pencil. Attach one end of the wall mount strap (F) to the
back of the unit with a 1x screw (F).
F
Wall Mount
F

17
Screw the other end into the wall at the marked height with a wall screw
(not supplied). You’re done, enjoy!
Two Door Storage Locka
Assembly Instructions
10
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558