Mocka Eliza Bedside Table User manual

Eliza Bedside Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
bolt
x16
x4
AB C D E F G H
JKLM N O I
Hardware Supplied
dowel
x8
screw
x36
slide
rail x3
slide
rail x3
slide
rail x3
slide
rail x3
locking
nut x16
screw
x4
x4
wedge
x3
handle
x16
screw bolt
x12
screw
key x1
Allen
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Phillips & Flathead screwdrivers
long
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.

Eliza Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12
Attach 3x slide rails (F) and 3x slide rails (G) to panels [3] and [4]
as shown and secure with 18x screws (E). Tighten with a screwdriver.
F
CL
E
Insert 4x bolts (C) into panel [1] as shown. Tighten with a screwdriver.
EF
G
E
G
CR
E
C
3
4
1

Eliza Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
3 4
Attach panels [3] and [4] to panel [1] with 4x dowels (A) and
secure with 4x locking nuts (D). Tighten with a screwdriver.
Slide panel [5] down along the grooves between the panels [3] and [4],
to form the back of the unit as shown.
1
4
3
A
D
A
D
4
3
5

Eliza Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
65
Attach panel [2] to panels [3] and [4] with 4x dowels (A) and
secure with 4x long screws (B). Tighten with a screwdriver.
Attach 4x legs [6] to panel [2] and secure with 16x bolts (L).
Tighten with an Allen Key (N).
A
B
2
4
3
L
6
2
N
L
6

Eliza Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
7 Drawers x3 8 Drawers x3
Insert 4x bolts (C) into panel [7]. Tighten with a screwdriver.
Attach panels [8] and [9] to panel [7] and secure with 4x
locking nuts (D). Tighten with a screwdriver
.
Slide panel [10] along the grooves between the side panels [8] and
[9] to form the base of the drawer. Attach panels [11], [8] and [9] as
shown using 4x screws (M). Tighten with a screwdriver.
M
11
10
D
7
7
D
8
9
C
8
9
8
9

Eliza Bedside Table
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
9 Drawers x3 10
Assembly Instructions
Attach slide rail (I) and slide rail (H) to the underside of the side
panels as shown. Secure with 4x screws (E) and tighten with a
screwdriver. Attach handle (O) to panel [7] and secure with 2x
screws (E). Tighten with a screwdriver.
Insert the assembled drawers into the corresponding compartments
as shown. Ensure the drawers slide easily along the rails.
7
E
O
E
H
I
E
7
8
9

Eliza Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
1211
Attach 4x wedges (J) into the corners of the back of the unit and secure
with 4x screws (K). Tighten with a screwdriver. Attach 1x safety strap (V)
to the top of the back side of the unit as shown using 1x washer (Z) and
1x screws (W). Tighten with a screwdriver.
Once assembled lift furniture into place, do not drag. Use a drill to
create a small hole lining up with the top of the safety strap (V).
Fasten to the wall using 1x washer (Z) , 1x wall anchor (X) and
1x wall screw (Y).
V
W
Z
J
K
1
J
K
V
Z
W
5
X
Y
Z
1
X
Y
Z