Mocka Urban Bedside Table User manual

Phillips & Flathead screwdrivers and hammer required
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
WARNING: Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
A B1 B2 C1 C2 D
EFH I J
KL
G
M
Hardware Supplied
50mm
screw x8
30mm
screw x16
bolt &
nut x12
12mm
screw x12
18mm
screw x4
wedge
x4
feet
x4
25mm
screw x2
wall
anchor x2
cover
x1
wall
strap x2
14mm
screw x2
dowel
x12
50mm
screw x8
slide
rail x2
N O P
bracket
x1
12mm
screw x1
stopper
x1
E1
E2
E4
E3
Urban Bedside Table
1
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Attach 4x feet (H) to the leg panels. Attach the middle panels to the legs using 16x 30mm screws (B2).
Tighten with a screwdriver.
B2
B2
B2
B2
H
B2
H
B2
H
B2
H
B2
Urban Bedside Table
2
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions

12
Attach 4x feet (H) to the leg panels. Attach the middle panels to the legs using 16x 30mm screws (B2).
Tighten with a screwdriver.
B2
B2
B2
B2
H
B2
H
B2
H
B2
H
B2
34
Attach panel [2] to the legs using 8x 50mm screws (B1). Tighten with a
screwdriver.
Insert 2x bolts (A) and attach 1x slide rail (E1) to panel [4] using 2x
12mm screws (C1). Insert 2x bolts (A) and attach 1x slide rail (E3) to
panel [5] using 2x 12mm screws (C1). Tighten with a screwdriver.
B1
2
5
4
B1B1B1 B1
B1 B1
B1
B1
B1
E3
E1
C1
C1
A
AA
A
Urban Bedside Table
3
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions

56
Attach 1x bracket (N) to panel [3] using 4x 12mm screws (C1). Tighten
with a screwdriver.
Attach panels [4] and [5] to panel [3] using 4x dowels (F) and 4x locking
nuts (A). Tighten with a screwdriver.
A
3
3
5
4
N
F
C1
F
F
N
A
A
Urban Bedside Table
Assembly Instructions
4
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz | mocka.com.au
56
Attach 1x bracket (N) to panel [3] using 4x 12mm screws (C1). Tighten
with a screwdriver.
Attach panels [4] and [5] to panel [3] using 4x dowels (F) and 4x locking
nuts (A). Tighten with a screwdriver.
A
3
3
5
4
N
F
C1
F
F
N
A
A
78
Attach panels [4] and [5] to panel [2] using 4x dowels (F) and 4x 50mm
screws (D). Tighten with a screwdriver.
Attach 4x bolts (A) to panel [1].
5
4
2
1
D
A
F
D
F
D
F
D
F
A
A
A
Urban Bedside Table
Assembly Instructions
5
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

910
Attach panels [8], [9] and [10] together with 4x 50mm screws (D). Slide
panel [11] between the grooves of the side panels. Attach 1x stopper (P)
to panel [7] with 1x 12mm screw (O) and attach to panels [8] and [9] using
4x nut and bolt sets (A). Attach 1x slide rail (E2) to panel [8] and 1x slide
rail (E4) to panel [9] using 4x 12mm screws (C1). Tighten with a
11
9
8
9
8
7
10
9
8
7
E2
C1
A
O
P
D
E4
D
A
A
C1
C1
C1
Slide panel [6] down the grooves between panels [4] and [5] to form the
back of the unit. Attach panel [1] to panels [4] and [5] using 4x dowels (F)
and 4x locking nuts (A). Tighten with a screwdriver.
6
1
5
4
FF
F
F
A
A
A
A
A
A
Urban Bedside Table
Assembly Instructions
6
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

910
Attach panels [8], [9] and [10] together with 4x 50mm screws (D). Slide
panel [11] between the grooves of the side panels. Attach 1x stopper (P)
to panel [7] with 1x 12mm screw (O) and attach to panels [8] and [9] using
4x nut and bolt sets (A). Attach 1x slide rail (E2) to panel [8] and 1x slide
rail (E4) to panel [9] using 4x 12mm screws (C1). Tighten with a
11
9
8
9
8
7
10
9
8
7
E2
C1
A
O
P
D
E4
D
A
A
C1
C1
C1
Slide panel [6] down the grooves between panels [4] and [5] to form the
back of the unit. Attach panel [1] to panels [4] and [5] using 4x dowels (F)
and 4x locking nuts (A). Tighten with a screwdriver.
6
1
5
4
FF
F
F
A
A
A
A
A
A
11
12
Insert the drawer as shown, ensuring it slides smoothly and easily along
the rails. Slide 1x cover (M) over the bracket (N). Once assembled, lift
the furniture into place, do not drag. If the drawer is not catching or sitting
flush, twist the end of the cover (M) until it catches on the stopper (P).
7
Attach 4x wedges (G) to panel [6] using 4x 18mm screws (C2). Tighten
with a screwdriver.
6
C2
GG
G
G
G
N
M
Urban Bedside Table
Assembly Instructions
7
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

13 14
Ensure unit is balanced and steady before use. You’re done, enjoy!
1
Move the unit into the desired location up against a wall. Attach 2x wall
straps (L) to the back sides of panel [1] and secure with 2x 14mm screws
(J). Fasten to wall using 2x wall anchors (K) and 2x wall screws (I).
K
L
I
J
J
Safety Straps
Urban Bedside Table
Assembly Instructions
8
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558