Mocka Nava Four Drawer User manual

Nava Four Drawer
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
Wall Strap
x4
washer
Z
Y
wall
anchor
x2
X
safety
strap x2
WV
screw
x2
wall
screw
x2
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
bolt
x12
x8
ABC D E F G HJ
KLM N
I
O
Hardware Supplied
P
dowel
x20
screw
x64
slide
rail x4
slide
rail x4
slide
rail x4
slide
rail x4
locking
nut x12
screw
x14 x8
x4 bolt
x20
locking
nut x20
small small
Q
wedge
x4
screw
x8
bracket
cover
x8
bolt
washer
x40
R
screw seal
x8
ST
key x1
Allen plastic
glide x4
U
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Phillips & Flathead screwdrivers
and hammer required

Nava Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12
Attach 4x slide rails (F) and 4x slide rails (G) to panels [3] and [4] as shown
with 24x screws (E). Insert 8x bolts (C) into panels [3] and [4]. Tighten with
a screwdriver.
F
CL
E
Attach 8x brackets (M) to panels [5] and [2], secure with 16x
screws (E). Tighten with a screwdriver. Place 8x covers (N) over
the brackets (M) as shown.
3
4
EE
E
F
EE
E
F
EE
E
F
C
EE
E
F
E
G
E
E
C
C
C
C
C
C
E
G
E
EE
G
E
EE
G
E
E
C
G
CR
E
EE
M
EE
M
EE
M
EE
M
N
M
x3
5
2
E
E

Nava Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
3 4
Attach panels [5] and [6] to panel [3] with 4x dowels (A) and secure
with 4x locking nuts (D). Tighten with a screwdriver.
Attach panel [4] to the unit with 4x dowels (A) and secure with 4x
locking nuts (D). Tighten with a screwdriver.
A
D
A
D
A
D
AD
D
A
D
A
D
A
D
D
A
5
5
5
6
3
4
5
5
5
6
D

Nava Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
65
Slide panel [7] down along the grooves between the panels [3] and [4]. Insert 4x bolts (C) into panel [1] and tighten with a screwdriver.
C
C
C
1
C
4
3
7

Nava Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
7 8
Attach panel [1] to the unit with 4x dowels (A) and secure with 4x
locking nuts (D). Tighten with a screwdriver.
Slide panel [7] down along the grooves between the panels [3] and [4].
A
A
A
A
D
D
D
1
4
3
7
4
3
D

Nava Four Drawer
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
910
Assembly Instructions
Attach panel [2] to the unit with 4x dowels (A) and secure with
4x screws (B). Tighten with a screwdriver.
Attach panels [10] to panels [8] and [9] with 16x screws (R).
Tighten with a screwdriver.
B
A
A
B
B
B
A
4
3
2
R
R
RR
10
8
9
R

Nava Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
1211
Attach panels [8] and [9] to panel [2] and secure with 10x long
screws (B). Tighten with a screwdriver.
Attach Legs [11] to panels [10] with 4x washers (L) and 4x bolts (Q).
Tighten with the Allen key (T). Attach 4x plastic glides (U) to the legs
using a hammer as shown.
L
11
10
Q
L
Q
B
B
B
B
B
B
B
B
B
B
2
8
9
T
U
U
U
U
U

Nava Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
13 14
Drawers x4
O
O
O
OO
PP
P
P
P
A
12
13
14
15
12
16
13
RR
RR
RR
E
E
E
E
14
13
H
I
17 14
13
Insert 5x bolts (O) to panel [12]. and attach 2x seal (S) using 2x screw
(E) to panel [12]. Attach panels [13], [14] and [15] to panel [12] with 1x
dowel (A) and using 5x locking nuts (P). Tighten with a screwdriver.
Slide panel [16] along the grooves between the panels [13] and [14]
to form the base of the drawer.
Attach panels [13], [14], [15] and [17] as shown using 6x screws (R).
Tighten with a screwdriver. Attach slide rail (I) and slide rail (H) to the
underside of the side panels as shown. Secure with 4x screws (E) and
tighten with a screwdriver.
14
E
S
E
S

Nava Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
9
15 16
Insert the assembled drawers into the corresponding compartments as
shown. Ensure the drawers slide easily along the rails. If the door is not
catching or sitting flush, twist the end of the cover (N) until it catches on
the seal (S).
Attach 8x wedges (J) into the corners of the back of the unit and secure
with 8x screws (K). Tighten with a screwdriver. Attach 2x safety straps (V)
to the top of the back side of the unit as shown using 2x washers (Z) and
2x screws (W). Tighten with a screwdriver.
J
J
J
J
J
J
J
K
7
K
K
K
K
K
K
7
K
J
J
V
W
Z
V
W
Z
screw
strap
washer
K
12
1
N

Nava Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
10
17 18
Once assembled lift furniture into place, do not drag. Attach the other
end of the safety straps (V). Fasten to the wall using 2x washers (Z), 2x
wall plugs (X) and 2x screws (Y). Ensure unit is balanced and steady
before use.
You’re done, enjoy!
X
Y
Z
wall
plug
screw
strap
washer
X
Y
Z