Mocka Olwyn User manual

Olwyn Coffee Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
1
mocka.co.nz | mocka.com.au
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
AB
Hardware Supplied
Bolt
x4
washer
x4
C
feet
x4
Phillips screwdriver required

Olwyn Coffee Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
2
mocka.co.nz | mocka.com.au
12
3
Slide parts [2] between the grooves on parts [3].
Tighten with a screwdriver.
Screw the legs into the brackets as shown. Attach 4x feet (C) to the
bottom of the legs.
2
C
C
C
C
1
B
B
B
B
A
A
A
A
3
2
Attach parts [2] and [3] to parts [1] with 4 x bolt (A) and secure with 4 x washers (B).
Tighten with a screwdriver.