Mocka Porto User manual

Phillips screwdriver required
A B C D
Hardware Supplied
50mm
screw x20
wall plug
x2
25mm
screw x2
safety
strap x2
WARNING: Any furniture that is not anchored
to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb
up on the furniture or in the event of an
earthquake. Accordingly, we recommend that
all furniture is anchored to a wall. We supply a
free safety wall anchor with all furniture sold
and we recommend these are used to prevent
your product tipping. The fixing device
provided should fit most wall types, but please
note that different wall materials may require
different fixing devices from those supplied.
Porto Corner Shelves
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Attach shelf panels [2], [3] and [4] to the main unit as shown and secure
with 12x 50mm screws (A). Tighten with a screwdriver.
Attach shelf panel [1] into the unit and secure with 4x 50mm screws (A).
Attach top shelf panel [5] with 2x safety straps on the innermost sides as
shown. Secure with 4x 50mm screws (A) and tighten with a screwdriver.
Once assembled lift furniture into place, do not drag.
A
A
A
A
A
AA
A
A
A
A
A
2
4
3
A
AA
A
A
A A
A
5
1
D
A
D
A
Porto Corner Shelves
2
mocka.co.nz | mocka.com.au
Assembly Instructions

12
Attach shelf panels [2], [3] and [4] to the main unit as shown and secure
with 12x 50mm screws (A). Tighten with a screwdriver.
Attach shelf panel [1] into the unit and secure with 4x 50mm screws (A).
Attach top shelf panel [5] with 2x safety straps on the innermost sides as
shown. Secure with 4x 50mm screws (A) and tighten with a screwdriver.
Once assembled lift furniture into place, do not drag.
A
A
A
A
A
AA
A
A
A
A
A
2
4
3
A
AA
A
A
A A
A
5
1
D
A
D
A
3
Attach the other end of the safety straps (D) to the wall using 2x wall
plugs (C) and 2x 25mm scews (B). Tighten with a screwdriver. You’re
done, enjoy!
B
C
D
Porto Corner Shelves
3
mocka.co.nz | mocka.com.au
Assembly Instructions