Mocka Parker Console User manual

WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall
anchor with all furniture sold and we recommend these are used to prevent your product tipping.
The fixing device provided should fit most wall types, but please note that different wall materials
may require different fixing devices from those supplied.
Phillips & Flathead screwdrivers and hammer required
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
A B1 B2 C
DEFG
H I J
Hardware Supplied
50mm
screw x8
30mm
screw x8
bolt &
nut x30
12mm
screw x16
25mm
screw x2
wall
anchor x2
wall
strap x2
14mm
screw x2
dowel
x24
50mm
screw x10
slide
rail x4
E1
E2
E4
E3
Parker Console
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Attach the leg panels together as shown using 8x 50mm screws (B1).
Tighten with a screwdriver.
Attach panel [2] to the legs using 8x 30mm screws (B2). Tighten with a
screwdriver. Insert 8x bolts (A) into panel [2].
B2
B2
B2
B2
B1
B2
B1
B2
B1
B2
B1
B2
2
A
A
A
A
A
A
A
A
Parker Console
2
mocka.co.nz | mocka.com.au
Assembly Instructions

12
Attach the leg panels together as shown using 8x 50mm screws (B1).
Tighten with a screwdriver.
Attach panel [2] to the legs using 8x 30mm screws (B2). Tighten with a
screwdriver. Insert 8x bolts (A) into panel [2].
B2
B2
B2
B2
B1
B2
B1
B2
B1
B2
B1
B2
2
A
A
A
A
A
A
A
A
34
Insert 2x bolts (A) and attach 1x slide rail (E1) to panel [4] using 2x
12mm screws (C). Insert 2x bolts (A) and attach 1x slide rail (E3) to
panel [5] using 2x 12mm screws (C). Tighten with a screwdriver.
Attach 1x slide rail (E3) to one side of panel [6] using 2x 12mm screws
(C). Attach 1x slide rail (E1) to the other side of panel [6] using 2x 12mm
screws (C). Tighten with a screwdriver.
flip
E1
5
4
E1
E3 E1
C
E3
E3
C
C
C
C
C
6
6
E3
A
A
A
A
Parker Console
3
mocka.co.nz | mocka.com.au
Assembly Instructions

56
Attach panels [4], [5] and [7] to panel [3] using 8x dowels (F) and 8x
locking nuts (A). Tighten with a screwdriver as shown.
A
F
F
F
F
F
7
5
4
3
7
F
Insert 4x bolts (A) into the back of panel [3] as shown.
3
A
A
A
A
A
A
A
A
A
A
Parker Console
Assembly Instructions
4
mocka.co.nz | mocka.com.au

Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz | mocka.com.au
56
Attach panels [4], [5] and [7] to panel [3] using 8x dowels (F) and 8x
locking nuts (A). Tighten with a screwdriver as shown.
A
F
F
F
F
F
7
5
4
3
7
F
Insert 4x bolts (A) into the back of panel [3] as shown.
3
A
A
A
A
A
A
A
A
A
A
78
Attach panel [6] to panel [3] using 2x dowels (F) and 2x 50mm screws
(D). Attach panels [4], [5] and [7] to panel [2] using 8x dowels (F) and 8x
locking nuts (A). Tighten with a screwdriver.
6
2
F
F
F
F
F
F
F
F
F
F
D
D
7
5
4
3
7
A
A
A
A
1
A
Insert 6x bolts (A) into panel [1].
A
A
A
A
A
Parker Console
Assembly Instructions
5
mocka.co.nz | mocka.com.au

910
Slide panel [8] down along the grooves between panels [4] and [5] to
form the back of the unit. Attach panel [1] to panels [4], [6] and [5] using
6x dowels (F) and 6x locking nuts (A). Tighten with a screwdriver.
Attach panels [11], [12] and [13] together using 4x 50mm screws (D). Slide
panel [14] between the side panels and attach panel [9]/[10] using 4x nut
and bolt sets (A). Attach 1x slide rail (E2) to panel [11] and 1x slide rail (E4)
to panel [12] using 4x 12mm screws (C). Tighten with a screwdriver.
10
9
86
5
4
1
13
12
11 14
F
FF
F
F
F
E4
E2
C
A
D
D
D
D
A
A
C
C
C
12
11
12
11
A
A
A
A
A
A
A
A
Parker Console
Assembly Instructions
6
mocka.co.nz | mocka.com.au

910
Slide panel [8] down along the grooves between panels [4] and [5] to
form the back of the unit. Attach panel [1] to panels [4], [6] and [5] using
6x dowels (F) and 6x locking nuts (A). Tighten with a screwdriver.
Attach panels [11], [12] and [13] together using 4x 50mm screws (D). Slide
panel [14] between the side panels and attach panel [9]/[10] using 4x nut
and bolt sets (A). Attach 1x slide rail (E2) to panel [11] and 1x slide rail (E4)
to panel [12] using 4x 12mm screws (C). Tighten with a screwdriver.
10
9
86
5
4
1
13
12
11 14
F
FF
F
F
F
E4
E2
C
A
D
D
D
D
A
A
C
C
C
12
11
12
11
A
A
A
A
A
A
A
A
11
12
I
J
Insert the drawers, ensuring they slide smoothly against the rails. Once
assembled, lift furniture into the desired position against a wall, do not
drag. Attach 2x wall straps (J) to the back sides of panel [1] and secure
with 2x 14mm screws (H). Fasten to wall using 2x wall anchors (I) and 2x
wall screws (G). Tighten with a screwdriver.
Safety Straps
G
Ensure unit is balanced and steady before use. You’re done, enjoy!
H
H
1
9
10
Parker Console
Assembly Instructions
7
mocka.co.nz | mocka.com.au