Mocka Hamptons User manual

mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Hamptons
Console Table
Thank you for your purchase.
Please follow the instructions below for correct assembly
WARNING: Any furniture that is not anchored to a wall has the
potential to tip over in certain circumstances, i.e. if a child
attempts to climb up on the furniture or in the event of an
earthquake. Accordingly, we recommend that all furniture is
anchored to a wall. We supply a free safety wall anchor with all
furniture sold and we recommend these are used to prevent
your product tipping. The fixing device provided should fit most
wall types, but please note that dierent wall materials may
require dierent fixing devices from those supplied.
Phillips & Flathead screwdrivers and hammer required.
*We recommend using a Flathead screwdriver to tighten
all locking nuts 100% before first use.
.
X
Z
Y
W
safety
x1
strap
x1
screw
long
x1
screw
wall
x1
anchor
x1
washer
B
ACDEF
GH
30 mm
10 mm
Hardware Supplied
x45
boltlocking
nut x 45 x 22
dowelsmall
I
screw x24
L + R
x6
slide rail
L + R
x6
slide rail
long
screw x 12
40 mm
long
J
25 mm
screw x 8
small
screw x4
handle
K
x 3
long
screw x4

1
Hamptons
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
2
Console Table
2
nsert 11 x bolts (A) into panel [1]. Attach 4 x screws (J) into panels [6] and [1].
Attach 4 x screws (K) into panels [7] and [1]. Tighten with a screwdriver.
Attach 2 x left slide rails (G) to panels [5] and secure with 4 x small screws (E).
Attach 2 x right slide rails (G) to panels [5] and secure with 4 x small screws (E).
A
61
G
G
E
G
5
A
J
A
J
J
J
A
A
A
A
7
K
K
K
K
A
A
5
EE
E
G
A
A
A

Hamptons
Console Table
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Attach panels [5] to panels [1] and secure with 4 x locking nuts (B).
3 4
Attach 1 x left slide rail (G) to panel [3] and secure with 2 x small screws (E).
Attach 1 x right slide rail (G) to panel [4] and secure with 2 x small screws (E).
Insert 6 x bolts (A) into panels [3] and [4]. Tighten with a screwdriver.
GG
B
G
5
3
E
5
1
B
B
BE
A
A
A
4
A
A
A
EE
G

mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Hamptons
Console Table
5 6
Insert 2 x dowels (C) into panel [8]. Attach panels [8] and [9] to panels [3]
and [4] and secure with 6 x locking nuts (B). Attach 1 x wall strap (W)
to panel [9] using 1x screw (Y).
Attach panel [8] to panels [5] and secure with 2 x long screws (D).
Insert 6 x dowels (C) into panels [1] and [5]. Attach panels [3], [4],
[8] and [9] to panels [1] and [5] and secure with 7 x locking nuts (B).
3
B
4
B
B
C
B
9
8
3
4
5
5
1
C
CC
C
B
CC
B
B
B
B
B
D
D
8
9
B
W
YB
B
B
C

Hamptons
Console Table
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Insert 12 x bolts (A) into panel [2]. Tighten with a screwdriver. Insert 4 x dowels (C) into panels [3] and [4]. Attach panel [2] to panels
[3] and [4], secure with 4 x long screws (D). Attach panels [5] and [9]
and secure with 2 x lon g screws (D).
7 8
C
4
5
A
A
A
A
A
A
A
A
A
A
A
A
2
C
CC
DD
DD
D
D
5
9
3
2

Hamptons
Console Table
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Attach 4 x bolts (A) into panels [16]. Attach 4 x dowels (C) to panels [15]
and [16]. Insert 4 x locking nuts (B) into panels [15]. Tighten with a screwdriver.
Insert 6 x dowels (C) into panels [2]. Attach panels [15] and [16] to panel
[2] and secure with 12 x locking nuts (B).
109
C
BBA
C
A
A
BCB
A
C
15
15
16
16
2
16
16
15
C
C
C
CC
C
B
BBBBB
B
B
BBBB

11
Hamptons
Console Table
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Insert 12 x bolts (A) into panels [10]. Attach panels [11] and [12] to panel
[10] secure with 12 x locking nuts (B).
Slide panels [14] between the grooves on panels [11] and [12] to form
the base of the drawer as shown. Attach panels [13] to panels [11]
and [12], secure with 12 x medium screws (F). Tighten with a screwdriver.
12
B
B
A
10
Drawers (x3)
A
AA
B
B
11
12
FF
F
F
13
14
12
11
Drawers (x3)

13
Hamptons
Console Table
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Attach 6 x slide rails (H) to panels [11] and [12] and secure with 12 x small
screws (E). Insert 3 x handles (I) into panels [10]. Tighten with a screwdriver.
Once assembled lift furniture into place, do not drag. Use a drill to create
a small hole lining up with the top of the safety strap (W). Fasten to wall
using wall anchor (X), washer (Z) and screw. Ensure the unit is balaced
and steady before use. You’re done, enjoy!
14
Drawers (x3)
E
E
H
I
11
12
10
X
Zx1
wall
screw
wall
anchor
wall
screw
Washer
E
Strap
H
E