Mocka Porto Bookcase User manual

A1 A2 A3 B C D
EF1 G H IF2
Phillips screwdriver required
Hardware Supplied
30mm
screw x8
25mm
screw x4
40mm
screw x16
22mm
screw x1
40mm
screw x8
nut
x4
14mm
screw x2
wall
anchor x2
safety
strap x2
feet
x4
25mm
screw x2
WARNING: Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
nut
x1
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Porto Bookcase
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Attach 4x feet (I) to the bottoms of the side panels. Connect the cross bars using 1x 22mm screw (B) and 1x nut (E). Attach
the cross bars to the side panels as shown using 4x 25mm screws (A3)
and 4x nuts (D). Tighten with the screwdriver.
I
I
I
I
A3 A3 D
D
D
D
A3
A3
E B
Porto Bookcase
2
mocka.co.nz | mocka.com.au
Assembly Instructions

12
Attach 4x feet (I) to the bottoms of the side panels. Connect the cross bars using 1x 22mm screw (B) and 1x nut (E). Attach
the cross bars to the side panels as shown using 4x 25mm screws (A3)
and 4x nuts (D). Tighten with the screwdriver.
I
I
I
I
A3 A3 D
D
D
D
A3
A3
E B
34
Attach the centre panels to the side panels using 8x 30mm screws
(A2). Tighten with a screwdriver.
Please Note: Lay down unit for easy assembly.
Attach the shelves [1] to the centre panels and secure from
underneath with 16x 40mm screws (A1). Tighten with a screwdriver.
A2 A2
A2
A2
A2
A2
A2
A2
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
1
1
1
1
Porto Bookcase
3
mocka.co.nz | mocka.com.au
Assembly Instructions

56
Secure the shelves with 8x 40mm screws (C) from underneath. Tighten
with a screwdriver.
Lift the completed unit into place, do not drag. Attach 2x safety straps (H)
to the back of the top shelf as shown, and secure with 2x 14mm screws
(F2). Screw the other end of the straps to the wall using 2x wall anchors
(G) and 2x 25mm screws (F1). You’re done, enjoy!
C
C
C
C
C
C
C
C
1
1
1
1
H
F1
HH
F2 G
Porto Bookcase
Assembly Instructions
4
mocka.co.nz | mocka.com.au