Mocka Vibe Desk User manual

WARNING: Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
Hardware Supplied
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
Phillips & Flathead screwdrivers required
Vibe/Olsen Desk
1
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
A B C D E F
IJ
dowel
x16
bolt
x12
bolt
x20
locking
nut x20
small
x30
long
screw
x20
KL
CL
runner
tracks x3
CR
runner
tracks x3
DL
runners
x3
DR
runners
x3
G
wedge
x4
H
screw
x4
M
allen
key
x1
screw
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
N
long
bolt
x4

12
Insert 8x bolts (A) into panel [1]. Tighten with a screwdriver.
Vibe/Olsen Desk
2
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions
Attach 1x CL runner track (I) to panel [2] and secure with 3x small
screws (F). Attach 1x CR runner track (J) to panel [3] and secure
with 3x small screws (F). Tighten with a screwdriver.
3
2
J
F
FF
I
CL
F
J
CR
I
1
A

Attach 1x CL runner tracks (I) to each panel [5] and secure with
3x small screws (F). Flip panels [5] over, attach 1x CR runner
tracks (J) to each panel [5], and secure with 3x small screws (F).
Tighten with a screwdriver.
34
Attach panels [2,3,5] to panel [1] and with 8x dowels (C) and secure with
8x locking nuts (B) and tighten with a screwdriver.
Vibe/Olsen Desk
3
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions
F
F
F
I
CL
F
J
CR
x2
5
I
J
5
B
2
3
5
5
1
C
B
C

Slide panel [6] between the grooves of panels [2] and [3].
Attach the bottom panel [4] to the unit with 8x dowels (C)
and secure with 8x long screws (D).
Tighten with a screwdriver.
5
Attach rail [7] to bottom panel [4] secure with 4 x long bolts (N).
Tighten with an Allen key (M).
Vibe/Olsen Desk
Assembly Instructions
4
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
6
D
C
N
6
2
3
5
5
4
4
7
N
M

Slide the completed drawers into the unit, ensuring they slide smoothly
and easily.
Attach 4x legs [8] to the bottom panel [4] with 12x bolts (E). Tighten with
an Allen key (M).
7
Insert 4x bolts (A) into panel [9] and tighten with a screwdriver. Attach
panels [10] and [11] to panel [9] with 4x locking nuts (B). Tighten with
a screwdriver. Slide panel [12] down along the grooves between the
side panels [10] and [11] to form the base of the drawer.
Vibe/Olsen Desk
Assembly Instructions
5
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
8
E
12
A
B
10
B
9
11
10
8
4
9
12
11
Drawers x3
E
M

Jolt Wardrobe
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
9
Attach panels [10], [11] and [13] with 4x long screws (D). Tighten with
a screwdriver. Attach DL runner (K) to panel [10] and DR runner (L) to
panel [11] with 4x small screws (F). Tighten with a screwdriver.
Complete the other two drawers.
Vibe/Olsen Desk
Assembly Instructions
6
10
Insert the completed drawer into the main unit as shown, ensuring
they slide easily along the rails.
D
13
10
F
F
K
L
10
11
11
Drawers x3

Jolt Wardrobe
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
11
Attach 4x wedges (G) to the corners of the back [6] as shown, and
secure with 4x screws (H).Attach 1x safety strap (V) to the top of the
back side of the unit as shown using 1x washer (Z) and 1x screw (W).
Tighten with a screwdriver.
Vibe/Olsen Desk
Assembly Instructions
7
12
Once assembled lift furniture into place, do not drag. Use a drill
to create a small hole lining up with the top of the safety strap (V).
Fasten to the wall using 1x washer (Z), 1x wall plug (X) and 1x
screw (Y). Ensure unit is balanced and steady before use. You’re
done, enjoy!
X
Y
Z
X
Y
Z
H
G
V
W
Z
V
Z
W
6
1
H
G