Mocka Jack Buffet User manual

Jack Buffet
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
bolt
x8
wedge
x8
screw
x8
screw
x8
A B C D E F G
HJKLMI
Hardware Supplied
dowel
x19
screw
x40
slide
rail x3
slide
rail x3
slide
rail x3
slide
rail x3
locking
nut x8
cam bolt
x8
handle
x5
N
allen key
x1
OP
small bolt
x15
small locking
nutx15
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
QR S
hinge x4 screw x24
shelf
plugs x8 long
screw x10
T U
screw
x18

Jack Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12
Insert 8x bolts (C) into panel [1]. Tighten with a screwdriver. Attach 3x slide rail (F) to panel [5] and secure with 9x screws (E).
Attach 3x slide rail (G) to panel [6] and secure with 9x screws (E).
Tighten with a screwdriver.
C
C
C
C
1
5
6
C
C
C
CE
E
E
E
E
E
E
E
E
E
E
E
E
F
CL
CR
E
G
F
F
F
G
E
E
E
G
E
E
E
G

Jack Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
34
Attach panel [3], [4], [5] and [6] to panels [1] with 8x dowels (A), and
secure with 8x locking nuts (D) and tighten with a screwdriver.
Insert connector [20] to join panels [8].
4
8
8
20
3
5
6
A
A
AA
AA
A
A
D
D
D
D
D
A
D

Jack Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
56
Slide panels [7] and [8] down along the grooves between the
panels [3], [4], [5] and [6].
Attach bottom panel [2] to the rest of the unit using 8x dowels (A).
Secure with 8x screws (B) and tighten with a screwdriver.
8
8
7
7
2
4
3
5
6
A
A
A
A
A
B
B
B
B
B
B
B
B
4
3
5
6

Jack Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
78
Attach panels [9] to the panels [10] with 8x cam bolts (J) and tighten with
an Allen key (N).
Attach leg panels to the bottom panel [2] with 10x screws (T), and tighten
with a screwdriver.
T
JN
J
J
J
T
T
T
T
T
T
T
T
T
2
9
10
10
910
T
JN

Jack Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
910
Insert 8x shelf plugs (S) into the end cavities of the cabinet as shown.
Insert the shelf panels [11] and balance on top of the plugs.
Attach 4x hinges (Q) to door panels [12] and [13], securing with 8x
screws (R). Attach 2x handles (M) to door panels [12] and [13] and
secure with 4x screws (E). Tighten with a screwdriver.
11
11
Q
RR
Q
RR
Q
RR
Q
RR
EE
M
EE
4
3
5
S
S
12
13
Q
RR

Jack Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
11 12
Secure door panels [12] and [13] to the main unit by attaching the other end
of the hinges (Q) with 16x screws (R) as shown. Tighten with a screwdriver.
Insert 5x small bolt (O) into panel [14]. Tighten with a screwdriver.
X3
O
O
O
O
O
14
R
R
R
12
13
NOTE: If the doors are uneven or
there is a gap in the middle, loosen
or tighten the screw on the door
hinge until they are sitting flush.

Jack Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
13 14
Attach panels [15], [16] and [17] to panel [14] with 1x dowel (A) and
secure with 5x small locking nuts (P). Tighten with a screwdriver.
Slide panel [18] along the grooves between the side panels [15], [16] and
[14] to form the base of the drawer.
P
P
A
P
P
14
15
17
16
15
16
18
X3 X3
P

Jack Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
9
15 16
Attach slide rails (I) and (H) to panels [16] and [15] with 4x small screws (E).
Tighten with a screwdriver.
Attach panels [15], [16] and [19] with 6x screws (U).Tighten with a screwdriver.
16
15
19
U
U
U
U
U
U
E
E
E
E
H
I
16
15
X3
X3

Jack Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
10
17 18
Insert the completed drawer into the main unit as shown, ensuring they
slide easily along the rails.
Attach handle (M) to panel [14] with 2x screws (E).Tighten with a screwdriver.
E
E
M
14
X3
14
14
14