Mocka Hamptons Entertainment Unit User manual

shelf
plug x2
A B C D E
FH I JG
Phillips & Flathead screwdrivers and hammer required
Hardware Supplied
dowel
x20
bolt
x12
locking
nut x12
stopper
x2
long
screw x 2
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Hamptons Entertainment Unit
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
x8
long screw
1
mocka.co.nz | mocka.com.au
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
40
long
screw x 5
K L
hinge
x 4
screw
x24
4
cover
x 4
handle
x 2
25 mm
P1
wedge
x12

2
12
Hamptons Entertainment Unit
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
J
J
J
J
J
A
61
Tighten with a screwdriver.
Insert 8 x bolt (A) into panels [1] .Attach 5 x screw (J) into panel [6] and[1].
Tighten with a screwdriver.
A
A
A
A
A
A
A
A
57
A
AAA
Attach 4 x bolt (A) into panel [5] and[7].

3
34
Hamptons Entertainment Unit
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
B
5
7
8
B
B
B
C
C
5
8
1
4
3
B
C
C
B
B
B
C
CB
B
C
C
B
C
C
B
Insert 8 x dowel (C) into panel [1]. Attach panel [1] to panels [3] and [4],[5] and[7]
and secure with 8 x locking nuts (B).Cover locking nuts (B) with 4 x covers (H).
7
B
x4
1
2I
H
H
Insert 4 x dowel (C) into panel [8]. Attach panel [8] to panels [5] and [7],[5] and
[7] and secure with 4 x locking nuts (B).

4
56
Hamptons Entertainment Unit
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
5
8
4
3
Insert 2 x stopper(E) into panel [5] and[7].
7
9
10
Slide panel [9] and [10] between the grooves on panels [3],[4] and [5] and
[7] to form the back of the unit as shown.Tighten with a screwdriver.
D
D
D
D
CC
CC
CC
D
CC
D
D
D
F
E
E
F
G
GF
4
5
7
3
2
Attach panel [2] to panel [3] and [4] and [5] and [7] with 8 x long screws (D).
Attach centre support 2 xshekf plug (G) to panel [2]. Attach 2 x long screw
(F) to centre support (G) asshown.
Insert 8 x dowel (C) into panel [2].
9
9

5
78
Hamptons Entertainment Unit
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
11
K
L
Attach 4x hinge (K) to panel [12] and secure with 8 x small screw (L).
K
K
LL
LL
I
Insert 2 x bolts (I) into panel [12] .
Drawers (x2)
P1
P1
P1
P1
P1
P1
P1
P1P1
P1P1
P1
10
9
9
P1
Attach 12x wedge (P1)to panel [9] and
[10] .
Tighten with a screwdriver.

6
9
Hamptons Entertainment Unit
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
NOTE: If the doors are
uneven or there is a gap in
the middle, loosen or tighten
the screw on the hinge until
K
Attach panel [11] to panel as shown. Secure with 16 x screws (L).
Tighten with a screwdriver.
11
11