Monacor ELAX-2812DPTZ User manual

INSTRUCTION MANUAL
PTZ Camera
ELAX-2812DPTZ

SAFETY INSTRUCTIONS
Read this guide carefully and keep it for future reference.
Follow all instructions for safe use of the product and
handle with care.
Camera is rated for outdoor use and is weatherproof
using included wall mount only. for indoor installations,
camera may be directly attached to a ceiling.
Camera is not intended for submersion in water.
Installation under a sheltered environment is recommended.
Do not disassemble the camera.
Do not point the camera directly towards the sun or a
source of intense light.
Use only the DC12V power supply. Use of a non-regulated,
non-conforming power supply can damage this product and
voids the warranty.
Make sure to install the camera in a location tha can
support the camera weight.
Make sure there are no live electrical cables in the area
where you plan to mount the camera.
Periodic cleaning may be required. Use a damp cloth
only. Do not use anything other than water to clean
the dome cover, as chemicals such as acetone can
permanently damage the plastic.

FEATURES>>
> mage sensor1/2.9" CMOS i
> About 2.1MP
> Effective Pixels 1920(H) x1080 (V)
> Video Format 1080P/25fps; 1080P/30fps
> 20M IR distance
> Support AHD/CVI/TVI/CVBS 4 In output
> Coaxial contrlol PTZ, Video line control PTZ
> Protection grade IP66
> 350 horizontal rotation, 90° ° vertical range
> Horizontal speed 80 /sec°
> White (black decoration) aluminum alloy (ADC)
> 2.8-8mm optical zoom lens

PRODUCT & ACCESSORIES
User Manual
Manual
Camera
Screw Pack
Wall Mount Bracket
(ELH-700;
optional accessory)
Adapter DC-12V/2A
(e.g. PSS-1230DC;
optional accessory)

Fix shell with screws to the ceiling.
Detach protection vinyl from dome cover.
Use the screws (provided) to secure the
wall mount bracket to the wall.
INSTALLATION
Ceiling installation
Wall installation

INSTALL ATION
SYSTEM SWITCH METHOD
Up
Down
Left Right
SET
Video line control keys can be PTZ operation, camera settings,
DVR need to have PTZ coaxial control function,
Before power is applied, please check the cables carefully.
AHD/CVT/TVI/CVBS output mode switching.
Use of coaxial control camera.
Press SET button after 3s as floow:
Pan/Tilt 、Zoom、Camera
CHECK POINTS BEFORE OPERATION
Pan/Tilt Zoom Camera

OPERATION
Pan/Tilt
Press Up Down Left Right to control Pan/Tilt
ZOOM
Camera
In camera mode:
P ress Up Down Left Right to control lens zoom and focus
Press SET enter camera manu
Press Down button after 5s release is CVI
Press Left button after 5s release is TVI
Press Right button after 5s release is CVBS
Press Up button after 5s release is AHD

SPECIFICATIONS
*. Specifications of this product can be subjected to change without notice.
Parameters Specifications
Camera
Sensor
Pixels
Video Format
Video output
1080P/25fps；1080P/30fps
Zoom
Focal length 2.8~8mm
Day & Night Auto / Day / Night (ICR)
Focus Auto / Manual
20M
low / middle /high/off
DNR
Pan/Tilt
Horizontal range
Horizontal speed
Vertical range
General
Communication COAX
OSD Multi-language support
Rated Power
Weight about 350g
350° Horizontal rotation
80°/ sec
0-90°
DC 12V /Current: 0.8A(MAX)
1/2.9" CMOS
1920(H)×1080(V) 2.1MP
3x Optical Zoom
Ø 105X 75 mm
CVBS/CVI/TVI/AHD 4 in 1 output
IR Distance
Operating Temperature
Protection grade
-10℃~+50℃
IP66
Appearance /material
Size
White ,aluminum alloy (ADC)

Unit (mm)
Ceiling installation dimensions
Wall installation dimensions
Ø105.14
Ø68.28
Ø142.23
147.94
34.3
37.76 22
119.56
Ø105.27
Ø68.28
37.76 24.3
73.06
DIMENSIONS