Morris MFS-16213 User manual

Instruction Manual
Stand & Table fan
MFS-16213
Read carefully these instructions and store them for future reference

SAFETY INSTRUCTIONS
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire,
electric shock and injury to persons, including the followings:
1. To prevent fire or shock hazard, DO NOT expose this appliance to rain or moisture.
2. Dangerous high voltages are present inside this enclosure. To avoid electric shock, DO NOT open
the cabinet, refer servicing to qualified personnel only.
3. This appliance is intended for household use only and not for commercial, industrial or outdoor use.
Other use not recommended may cause fire, electric shock or injury.
4. Ensure the fan is not placed near drapes,curtains, or any objects that may be drawn into the fan.
5. To protect against fire, electrical shock and injury to persons, do not immerse the unit, plug or cord
in water or spray it with liquids.
6. The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such
as vases, shall be placed on the product.
7. No naked flames sources, such as candles, should be placed on the product.
8. Ventilation should not be impeded by covering the ventilation openings. Slots and opening are
provided for ventilation to ensure reliable operation of the product and to protect it from overheating.
9. Care required with the use of this apparatus in tropical climates. Do not use the appliance to
temperatures over 40 °C.
10. Place the fan on a stable level and dry surface when operating to avoid overturning.
11. Only connect to a suitably AC 220-240V~50Hz mains socket.
12. Do not operate the fan in the presence of explosive and/ or flammable fumes. Do not place the fan or
any parts near an open flame, cooking or other heating appliance.
13. Do not operate the fan with a damaged cord or plug, after a malfunction or if it is dropped or
damaged in any manner.
14. Do not operate the fan without the fan grilles properly in place.
15. Do not place the fan close to an open window. Rain splashing on the fan could cause an electric
shock hazard.
16. Do not let the power cord hang over the edge of a table or counter or let it touch any hot surfaces.
17. Do not insert or allow foreign objects to enter the grille openings as this may cause damage to the
appliance.
18. Do not use the fan if grille becomes damaged or loose.
19. This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety.
20. Children should be supervised to ensure that they do not play with the appliance.
21. Switch the fan OFF and unplug it from the outlet when it is not in use, when moving fan from one
location to another and before cleaning.
22. To disconnect, grip the plug and pull it from the wall outlet. Never pull by the cord.
23. Do not attempt to repair, disassemble or modify the appliance. There are no user-serviceable parts
inside. Refer all servicing to qualified service personnel.

Product overview
Product specifications and parameters
1. Blade
2. Guard Hub
3.
Transparency Cover
4. Decorative cover
5. Inner-Column
6. Out-Lock
7. Base Cover
8. Base
9. Front Guard
10. Grille Hoop
11. Switch
12. Front Switch Box
13. Out-Column
14. Rear Guard
15. Rear Motor Cover
16. Flexd Rack
17. Rear Switch Box
18. Screw
19. Power Cord
●Model：MFS-16213
●Voltage：220-240V/50Hz
●Power：65W
●N.W.：6.7kg
●G.W.：7.4kg
●Product Size：1350*450*450MM
●
Box Size
：
465*195*565MM

Installation Instructions
●Read all instructions carefully before use.
●Keep the instructions manual for future reference.
1) Unscrew the grille retaining ring from the front of the motor housing by rotating it anti-clockwise.
2) Position the rear grille against the front of the motor housing with the handle uppermost, ensuring that the locating pegs
on the motor housing are engaged correctly in the holes in the grille.
3) Screw the grille retaining ring onto the projecting thread on the motor housing, by rotating clockwise and tighten firmly.
4) Remove and discard the PVC sleeve on the motor spindle.
5) Place the fan blade onto the motor spindle, locating the slot at he back of the blade on the drive pin that passes through
the motor spindle.(For the 9” fan, the blade just pushes onto the spindle)
6) Screw the blade retaining knob onto the motor spindle by rotating it anti-clockwise, and tighten firmly against the front
of the blade.
7) Sett grille hoop in the front grill then place on rear grille. Position the rear grille against the front grille by hand.
Tighten in clockwise
Insert
Installation Steps of Column and Base
Installation Steps of Fan Head

Operating Instructions
●Placed fan in the right place，to ensure the smooth when placing. Connect the power cord into a
220-240V /50HZ electrical outlet.
●ON/OFF：Press the ON/OFF button for fan.
●FAN SPEED：Press the SPEED button and "L" is for low speed, "M" is for middle speed, "H" is
for high speed.
●TIMER：Press TIMER button to activate timer sequence from 0.5hrs (30 MIN.) to 7.5hrs. Each
time this button is pressed, the timer goes up by 0.5hrs, 1hrs, 2hrs and 4hrs increments up to 7.5
hrs.
●WIND MODE：Press the MODE button select the nature wind, sleeping wind and normal wind.
Please attention that this function can only be used by remote control.
●OSCILLATING KNOB：Push down the oscillating knob and fan will oscillate. Pull up the knob
to stop oscillating
Clearing and maintenance
In order to guarantee results, clean the blades and front / rear grille once a month. The removal procedure
contrary to installation methods, cleaning methods are as following.
1. Use in dry place, free of excessive humidity and water.
2. Keep fan clean, wipe away dirt with a clean cloth.
3. Do not use spirits or thinner to clean fan.
4. Before putting the fan in storage, clean thoroughly then cover with a plastic bag and store in a dry place.
Display Part
Control Part

NOTICE ABOUT RECYCLING
Your product is designed and manufactured with high quality materials and components which
can be recycled and reused.
This symbol means that electrical and electronic equipment, at their end-of-life,
should be disposed of separately from your household waste. Please dispose of this equipment
at your local community waste collection/ recycling centre.
In the European Union there are separate collection systems for used electrical and electronic
products.
Please help us to conserve the environment we live in!
DECLARATION OF CONFORMITY
This product complies with the requirements of Directives:
EMC Directive: 2004/108/EC
Low Voltage Directive: 2006/95/EEC
RoHS II Directive 11/65/EU
EXCLUSIVE DISTRIBUTOR IN GREECE
Amiridis-Savvidis S.A.
87A, 17th November Str. - P.C. 55535
Pylaia - Thessaloniki - Greece
T: [phone] | F: [phone]
www.amiridis-savvidis.gr