Morris MFT-16218 User manual

INSTRUCTION MANUAL
16" TABLE FAN
MODEL: MFT-16218
READ AND SAVE THESE SAFETY INSTRUCTIONS
BEFORE USING THIS FAN

When using electrical appliances, basic precautions should
always be followed to reduce the risk of fire, electric shock, and injury to
persons, including the following:
1. To prevent fire or shock hazard, DO NOT expose this appliance to rain or
moisture.
2. Dangerous high voltages are present inside this enclosure. To avoid
electric shock, DO NOT open the cabinet, refer servicing to qualified
personnel only.
3. This appliance is intended for household use only and not for commercial,
industrial or outdoor use. Other use not recommended may cause fire,
electric shock or injury.
4. Ensure the fan is not placed near drapes,curtains, or any objects that may
be drawn into the fan.
5. To protect against fire, electrical shock and injury to persons, do not
immerse the unit, plug or cord in water or spray it with liquids.
6. The apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the product.
7. No naked flames sources, such as candles, should be placed on the
product.
8. Ventilation should not be impeded by covering the ventilation openings.
Slots and opening are provided for ventilation to ensure reliable operation
of the product and to protect it from overheating.
9. Care required with the use of this apparatus in tropical climates. Do not use
the appliance to temperatures over 40 °C.
10. Place the fan on a stable level and dry surface when operating to avoid
overturning.
11. Only connect to a suitablyAC 220-240V~50Hz mains socket.
12. Do not operate the fan in the presence of explosive and/ or flammable
fumes. Do not place the fan or any parts near an open flame, cooking or
other heating appliance.
13. Do not operate the fan with a damaged cord or plug, after a malfunction or
if it is dropped or damaged in any manner.
14. Do not operate the fan without the fan grilles properly in place.

15. Do not place the fan close to an open window. Rain splashing on the fan
could cause an electric shock hazard.
16. Do not let the power cord hang over the edge of a table or counter or let it
touch any hot surfaces.
17. Do not insert or allow foreign objects to enter the grille openings as this
may cause damage to the appliance.
18. Do not use the fan if grille becomes damaged or loose.
19. This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
20. Children should be supervised to ensure that they do not play with the
appliance.
21. Switch the fan OFF and unplug it from the outlet when it is not in use, when
moving fan from one location to another and before cleaning.
22. To disconnect, grip the plug and pull it from the wall outlet. Never pull by
the cord.
23. Do not attempt to repair, disassemble or modify the appliance. There are no
user-serviceable parts inside. Refer all servicing to qualified service
personnel.
WARNING! DO NOT use the fan in the following areas:
* Near an open flame, a hot burner, oven or other source of high heat.
* On a soft surface (such as carpet) or where it may tip over during use.
* Outdoors or in areas of high humiditywithout suitable ventilation (such as in
a bathroom, laundry area, near a sink, washer, pool or any source of water.
* In a window or near curtains.
* In areas where paint, petrol, etc. is stored and there is a risk of explosion or
fire from flammable gases, or in areas where substances are being sprayed.

Drawing:
Text:
1. Logo ring 2. Screw
3. safe screw 4. safe nut
5. Guard front 6. Blade lock
7. Blade 8. Guard lock
9.Guard back 10.Oscillating rod
11.Motor 12.Hand
13. Body 14. Power cord
15. Neck 16. Timer
17. Switch
Before first use
Unpacking: This product has been packaged to protect it against transportation
damage. Unpack the appliance and keep the original packaging carton and
materials in a safe place. It will help prevent any damage if the product needs to
be transported in the future, and you can use it to store the appliance when it is
not in use. In the event it is to be disposed of, please recycle all packaging
materials where possible.

Safe packaging disposal: Plastic wrapping can be a suffocation hazard for
babies and young children, so ensure all packaging materials are out of their
reach and disposed of safely.
Inspection: Unwind the cord to its full length and inspect it for damage. Do not
use the appliance if the appliance or its cord have been damaged or are not
working properly. In case of damage, contact our after sales support line for
advice on examination, repair or return of the damaged product.
Assembly
Your new fan has been shipped partially assembled to reduce wastage of
packaging material, paper cartons and weight. Follow the drawing above to
assemble it; the illustration opposite shows how all the parts fit together.
1. Unscrew guard lock and remove it from the motor shaft.
2. Position the rear guard through the motor shaft against the motor housing,
placing the vertical holes in the guard over the two pins on the housing. Make
sure the handle is on top. Screw on the guard lock in clockwise direction to hold
the rear guard securely in place.
3. Place the blade on the motor shaft. Secure the blade with the blade lock,
turning it anticlockwise to tighten.
4. Assemble the logo ring on front guard , then assemble front guard and rear
guard together by tighten the guard nut . Finally assemble the safe screw and
nut at the bottom of guard.
OPERATING INSTRUCTIONS BOPERATION
• Place your fan on a level and dry surface.
• Plug the power cord into AC220-240V wall outlets.
Speed Control
Speed is controlled by the button switch. (0=OFF, 1=Low, 2=Medium, 3= High).
To turn the fan on, press the desired button switch.
(1= Low, 2=Medium, 3= High).
Oscillation Control
To make the fan oscillate, push down on the oscillation knob located on the top
of the motor housing. To stop the fan from oscillating, pull up on the oscillation
knob when the fan is in the desired position

MAINTENANCE
Always turn off the fan and remove the plug from the socket-outlet
before cleaning.
Clean the external surfaces of the fan with a soft damp (not dripping wet)
cloth.
WARNING:
Do not immerse the fan in water.
Do not use any cleaning chemicals such as detergents and
abrasives.
Do not allow the interior (special for the PCB) to get wet as this
could create a hazardous situation.
When the unit is not in use, make sure that it is unplugged from the wall
socket. To store the fan, you may pack it in the original carton and store
it in a cool and dry place until later use.
In case of malfunction or doubt, do not try to repair the fan yourself; it
may result in a fire hazard or electric shock.
NOTICE ABOUT RECYCLING
Your product is designed and manufactured with high quality
materials and components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at
their end-of-life,
should be disposed of separately from your household waste.
Please dispose of this equipment at your local community
waste collection/ recycling centre.
In the European Union there are separate collection systems for used electrical
and electronic products.
Please help us to conserve the environment we live in!

DECLARATION OF CONFORMITY
Herewith, Amiridis-Savvidis S.A. states that this product, complies with the
requirements of below directives:
EMC-Directive: 14 / 30 / EU
Low Voltage Directive: 14/ 35 / EU
CE Marking: 93 / 68 / EEC
RoHS Directive: 11 / 65 / EU
The detailed declaration of conformity can be found at www.morris.gr
Exclusive importer in Greece:
Amiridis –Savvidis S.A.
87A, 17th Noemvriou str, P.C. 55534
Thessaloniki –Greece
T: [phone] | F: [phone]
www.amiridis-savvidis.gr
www.morris.gr