Morris MTF-16235 User manual

Tower Fan
Instruction Manual
PLEASE READ AND SAVE THESE INSTRUCTIONS
Attention: Pictures in this manual are for reference only.
Model's name: MTF-16235

SAFETY PRECAUTIONS
When using electrical appliances, basic precautions should always be
followed to reduce the risk of fire, electric shock, and injury to persons,
including the following:
1. To prevent fire or shock hazard, DO NOT expose this appliance to rain or moisture.
2. Dangerous high voltages are present inside this enclosure. To avoid electric shock,
DO NOT open the cabinet. Refer servicing to qualified personnel only.
3. This appliance is intended for household use only and not for commercial, industrial
or outdoor use. Other use not recommended may cause fire, electric shock or injury.
4. Do not plug or unplug the cord with wet hands.
5. This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning use of the appliance in a
safe way and understand the hazards involved. Children shall not play with the
appliance. Cleaning and user maintenance shall not be made by children without
supervision.
6. Ensure the fan is not placed near drapes,curtains or any objects that may be drawn into
the fan.
7. To protect against fire, electrical shock and injury to persons, do not immerse the
unit, plug or cord in water or spray it with liquids.
8. The appliance shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the product.
9. No naked flame sources - such as candles - should be placed on the product.
10. Ventilation should not be impeded by covering the ventilation openings. Slots
and opening are provided for ventilation to ensure reliable operation of the product
and to protect it from overheating.
11. Care required with the use of this appliance in tropical climates. Do not use it to
temperatures over 40 °C.
12. Place the fan
on a stable level and dry surface when operating to avoid overturning.
13. Only connect to a suitably AC 220-240V~50Hz mains socket.
14. Do not operate the fan in the presence of explosive and / or flammable fumes. Do not
place the fan or any parts near an open flame, cooking or other heating appliance.
1

26. If the supply cord is damaged it must be replaced by the manufacturer, its
service agent, or similarly qualified persons in order to avoid a hazard.
27. Never wash out the whole unit. Putting this appliance close to the fire is also
prohibited. Inhalation of Explosive or Corrosive items is also prohibited.
2
WARNING! DO NOT use the fan in the following areas:
•Near an open flame, hot burner, oven or other source of high heat.
•On a soft surface (such as carpet) or where it may tip over during use.
•Outdoors or in areas of high humidity without suitable ventilation (such as in a
bathroom, laundry area, near a sink, washer, pool or any source of water.
•In a window or near curtains.
•In areas where paint, petrol, etc. is stored and there is a risk of explosion or fire
from flammable gases, or in areas
•Where substances are being sprayed.
22. Children should be supervised to ensure that they do not play with the appliance.
23. Switch the fan OFF and unplug it from the outlet when it is not in use, when
moving fan from one location to another and before cleaning.
24. To disconnect, grip the plug and pull it from the wall outlet. Never pull by the cord.
25. Do not attempt to repair, disassemble or modify the appliance. There are no user-
serviceable parts inside. Refer all servicing to qualified service personnel.
18. Do not let the power cord hang over the edge of a table or counter or let it touch any hot
surfaces.
19. Do not insert or allow foreign objects to enter the grille openings as this may cause
damage to the appliance.
20. Do not use the fan if grille becomes damaged or loose.
21. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
15. Do not
operate the fan with a damaged cord or plug, after a malfunction or if it
is dropped or damaged in any manner.
16. Do not operate the fan without the fan grilles properly in place.
17. Do not place the fan close to an open window. Rain splashing on the fan could cause
an electric shock hazard.

ASSEMBLY INSTRUCTIONS
The outlet
through
Fig.
1
Fig.
2
Fig.
3
1. Take out the fan body and the spare parts from the box. Put the front base onto rear base and join them
together. (See Fig. 1)
2. Unlock the plastic nut from the fan body.
3. Pass the power cord through the flute, then insert the fan body into the base.(See Fig. 3)
4. Fix the fan body on the base with the plastic nut. (See Fig. 2)
3
PART FIGURE
Note: All the pictures in this manual are for explanation purpose only. Any discrepancy between
the real object and the illustration in the drawing shall be subject to the real subject.
1. Body
2. Rear base
3. Front base
4. Plastic nut
5. Power cord
1
3
4
2
5

c.BATTERY WARNINGS
1. Do not dispose of batteries in fire, batteries may explode or leak.
2. Do not mix old and new batteries.
3. Do not mix alkaline, standard or rechargeable batteries.
b. BATTERIES
(1) Slide the battery compartment cover.
(2) Insert the batteries and make sure that they are placed as shown in Fig.5.
(3) Slide back the battery cover.
NOTES: Use size “AAA” alkaline batteries. Do not use rechargeable batteries.
Fig.5
Press this timer key repeatedly to set the time for air delivery. Increase in increments up to "1-2-3-4-5-6-7"
hours.
5. TIMING KEY
After the fan has started, press this key to select oscillation mode. The lights on the display can indicate fan
oscillation mode.
4. OSC/LOUVER KEY
3. MODE KEY
Press this key to select mode. The sequence is normal, natural, and sleep when this key being touched
repeatedly or continuously. The light indicate mode state.
2. SPEED KEY
When the fan started, press this key repeated, the fan will work with “1-2-3” circulatory.
I. Remote Controller (Fig.4)
a. KEY INSTRUCTIONS
1. ON/OFF KEY
The “ON” key is for switching on the fan .The fan will be started at breeze
step. Press the “OFF” key if the fan needs to switch off.
Fig.4
OPERATION INSTRUCTION
4

d. REMOTE CONTROLLER OPERATION
Point the remote controller at the receptor on body of the fan and press the desired button. The remote
controller will work at distances of up to roughly five meters and the angle of 30 degree included between
right and left from the receptor.
The batteries must be removed from the remote controller before it is scrapped and that they are disposed of
safely.
e.OVERHEAT PROTECTION OF THE MOTOR
The windings of the motor have a thermal-fuse that burns out and the fan switches off and temperature of
the motor is no longer going up so that plastic parts of the fan don’t subject to deformation so far so to be
burned by the overheat if the motor is overheat for any unexpected reason.
II. Buttons on fan body / Panel indication (Fig.6)
The buttons on the body such as ON/OFF, SPEED, MODE, TIMER,
OSCILLATION have the same functions as those of the corresponding keys
on the remote controller.
Fig.6
1. Before cleaning and assembling, fan must be unplugged.
2. To ensure adequate air circulation to the motor, keep vents at the rear of the motor free of dust. Do not
disassemble the fan to remove dust.
3. Please wipe the exterior parts with a soft cloth soaking a mild detergent.
4. Do not use any abrasive detergent or solvents to avoid scratching the surface. Do not use any of the
following as a cleaner: gasoline, thinner, bending.
5. Do not allow water or any other liquid into the motor housing or interior parts.
MAINTENANCE
The fan requires little maintenance. Do not try to fix it by yourself. Refer it to qualified service personnel if
service is needed.
1. Be sure to unplug from the electrical supply source before cleaning.
2. Plastic parts should be cleaned with a soft cloth moisten with mild soap. Thoroughly remove soap film with
dry cloth.
CLEANING
5

NOTICE ABOUT RECYCLING
Your product is designed and manufactured with high quality materials and components
which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their end-of-life,
should be disposed of separately from your household waste. Please dispose of this
equipment at your local community waste collection/ recycling centre.
In the European Union there are separate collection systems for used electrical and
electronic products.
Please help us to conserve the environment we live in!
DECLARATION OF CONFORMITY
Herewith, KALLIOPI KARIDA & CO., LP states that this product, complies with the requirements of below
directives:
EMC-Directive: 14 / 30 / EU
Low Voltage Directive: 14 / 35 / EU
CE Marking: 93 / 68 / EEC
RoHS Directive: 11 / 65 / EU & 15 / 863 / EU
The detailed declaration of conformity can be found at www.morris.gr
Exclusive importer in Greece:
KALLIOPI KARIDA & CO., LP
87A, 17th Noemvriou str, P.C. 55535
Thessaloniki – Greece
T: [phone] | F: [phone]
www.morris.gr