Morris MFS-16242 User manual

READ AND SAVE THESE
INSTRUCTIONS Attention: Pictures in the
IM are for reference only.
MODEL: MFS-16242
Stand fan
Instruction manual

1
SAFETY INSTRUCTIONS
When using electrical appliances, basic precautions should
always be followed to reduce the risk of fire, electric shock
and injury to persons, including the following:
1. To prevent fire or shock hazard, DO NOT expose this
appliance to rain or moisture.
2. Dangerous high voltages are present inside this
enclosure. To avoid electric shock, DO NOT open the
cabinet, refer servicing to qualified personnel only.
3. This appliance is intended for household use only and
not for commercial, industrial or outdoor use. Other use
not recommended may cause fire, electric shock or injury.
4. Ensure the fan is not placed near drapes,curtains, or
any objects that may bedrawn into the fan.
5. To protect against fire, electrical shock and injury to
persons, do not immerse the unit, plug or cord in water or
spray it with liquids.
6. The apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such as
vases, shall be placed on the product.
7. No naked flames sources, such as candles, should be
placed on the product.
8. Ventilation should not be impeded by covering the
ventilation openings. Slots and opening are provided for
ventilation to ensure reliable operation of the product and
to protect it from overheating.

2
12. Do not operate the fan in the presence of explosive
and/ or flammable fumes. Do not place near an open
flame, cooking or other heating appliance.
14.
Do not operate the fan without the fan grilles properly
in place.
13.
Do not operate the fan with a damaged cord or plug,
after a malfunction or if it is dropped or damaged in
any manner.
15. Do not place the fan close to an open window. Rain
splashing on the fan could cause an electric shock
hazard.
16. Do not let the power cord hang over the edge of a table
or counter or let it touch any hot surfaces.
17. Do not insert or allow foreign objects to enter the
grille openings as this may cause damage to the
appliance.
10. Place the fan on a stable level and dry surface
when operating to avoid overturning.
11. Only connect to a suitably AC 220-240V~50Hz mains
socket.
9. Care required with the use of this appliance in tropical
climates. Do not use the appliance in temperatures over
40oC.
18. Do not use the fan if grille becomes damaged or loose.

3
22.To disconnect, grip the plug and pull it from the wall
outlet. Never pull by the cord.
23.Do not attempt to repair, disassemble or modify the
appliance. There are no user-serviceable parts inside.
Refer all servicing to qualified service personnel.
21.
moving fan from
Switch the fan OFF and unplug it from the outlet
when it is not in use, when moving it from one
location to another and before cleaning.
19. This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children
shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without
supervision. Children of less than 3 years should be
kept away unless continuously supervised.
20. Children aged from 3 years and less than 8 years shall
only switch on/off the appliance provided that it has
been placed or installed in its intended normal operating
position and they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children
aged from 3 years and less than 8 years shall not plug
in, regulate and clean the appliance or perform user
maintenance.
INDOOR USE ONLY

Name of components
Brief Introduction of the Product
Machine head
Plastic nut
Spinner
Rear grill
Blade
Front grill
Machine body
Pole
Base
Pad
Bolt
4

5
1
3
2
凹
凸
Installation instructions
Note
Please unscrew the plastic nut out of the machine head thread counterclockwise
Base installation
Align the lower pole assembly with the base, clamp them stably and then
fix them with bolt and pad
Installation of machine body and lower pole assembly
Firstly align the machine body with the hole position of the lower
pole assembly, then rotate it clockwise and finally fix it.
Rear grill installation and locking
Align the machine head with the rear grill, hang up and then lock
it with the plastic nut.
Align the convex point with the hole
Align the convex
with the concave
Tighten the rear grill clockwise

6
4
5
Clip
Pa!
Align the
convex with
the blade
concave
Lock the
blade
counterclock
wise
Place the MORRIS
logo uprightly
Press the grill with both
hands in order, install it in
place (if hearing a "snap")
and fix it with screws.
Buckle
the front mesh
enclosure with the rear
mesh stably
Self-buckled
installation
Mesh
buckle
Blade installation and locking
Align the 3 blade with the motor shaft, complete the passing
through of them and then fix the blade with 5 spinner
Front grill installation and fixing
Installation essentials: Find the front grill clip and place the
MORRIS logo uprightly

7
Normal
wind
Operation Instructions
Display area
Operation area
Click on / standby;
Short press this key to switch the wind speed.
Long press this key to switch the wind type (cycle: normal wind-gentle wind-
sleep wind-normal wind ...).
The numbers “1, 2, ..., 8, 9” on the display indicate the normal wind speed and
gear.
(Remark: There is no icon displayed for normal wind).
Short press this key to start up / shut down the powerful wind.
Long press this key to start up / shut down the mode of the wind changing
with the temperature.
In the powerful wind mode, the indicator will be turned on, and the screen will
display "H".
In sleep wind mode, this indicator will be turned on and the wind speed of the
fan will be automatically adjusted according to the selected program. There are
three gears, i.e. "1, 2, 3", and the required sleep wind speed can be adjusted by
pressing SPEED key.
This indicator will be lit up in the mode of wind changing according to the
temperature. This mode can intelligently adjust the wind power according to the
change of ambient temperature.
The timerto turn on or shut off the machine can only be set by the remote
control, and this indicator will be turned on during timing state.
The oscillating angle can be switched after pressing the oscillating key repeatedly
in the startup state, i.e. angle: 60°→ shutdown → 90°→ shutdown → 120°→
shutdown… cycle switching.
60 °, 90 ° and 120 ° are displayed accordingly and respectively , ,
(Remark: the screen will not display the oscillating stop state).
Functions Operation Instructions
Operation
instructions of the
machine body
TURBO
TURBO

8
Remote Control Panel
Note
Startup/StandbyStart up or Shut
down oscillating
and air blowing
“+ / -”
Set the wind
speed or time
Switch the wind type
Start up / shut down the mode of the
wind changing with the temperature
Set the timer to start up / shut down
AAA battery, 1.5V
The remote control should be normally used within 5 meters of the front of
the product and 30 degrees of the deviation angle.
The battery contains many heavy metals, acids and bases, etc., which may
threaten human health. Waste batteries should be recycled separately.
Please use alkaline
batteries of model
"AAA".Don't use the
non-recyclable batteries.
“- /+”
Startup/Standby.
Start up or shut down oscillating and air blowing.
Set the wind speed or time.
Start up or shut down the mode of the wind changing with the temperature.
- You can set start up timer when the fan is in stand by mode.
- You can set shut down timerwhen the fan is in working mode.
After clicking , the time can be set by pressing or "+ and -" (cycle: 0-1-2 -... 8-0h).
The start up or shut down time will be confirmed after the indicator flashes 3 times. If
you wish to cancel the timer (start up or shut down time), click again the buttons until
the display shows 0.
Switch the wind type.
Functions Operation Instructions

MAINTENANCE INSTRUCTION
CLEANING
9
The fan requires little maintenance. Do not try to fix it by yourself. Refer it to qualified service
personnel if service is needed.
1. Before cleaning and assembling, fan must be unplugged.
2.To ensure adequate air circulation to the motor, keep vents at the rear of the motor free of
dust. Do not disassemble the fan to remove dust.
3. Please wipe the exterior parts with a soft cloth soaking a mild detergent.
4. Do not use any abrasive detergent or solvents to avoid scratching the surface.
Do not use any of the following as a cleaner: gasoline, thinner.
5. Do not allow water or any other liquid into the motor housing or interior parts.
1.Make sure to unplug from the electrical supply source before cleaning.
2.Plastic parts should be cleaned with a soft cloth moisten with mild soap. Thoroughly remove
soap film with a dry cloth.
PRODUCT PARAMETER
MFS-16242
Model
50Hz
Rated frequency
19W
Rated power
220-240V~
Rated voltage

NOTICE ABOUT RECYCLING
Your product is designed and manufactured with high quality materials
and components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their end-of-
life, should be disposed of separately from your household waste.
Please dispose of this equipment at your local community waste collection/
recycling centre.
In the European Union there are separate collection systems for used
electrical and electronic products.
Please help us to conserve the environment we live in!
DECLARATION OF CONFORMITY
Herewith, KALLIOPI KARIDA & CO., LP states that this product, complies with the
requirements of below directives:
EMC-Directive: 14 / 30 / EU
Low Voltage Directive: 14 / 35 / EU
CE Marking: 93 / 68 / EEC
RoHS Directive: 11 / 65 / EU & 15 / 863 / EU
The detailed declaration of conformity can be found at www.morris.gr
Exclusive importer in Greece:
KALLIOPI KARIDA & CO., LP
87A, 17th Noemvriou str, P.C. 55535
Thessaloniki – Greece
T: [phone] | F: [phone]
www.morris.gr