Morris MTF-16219 User manual

Please read the manual carefully before use.
40’Tower Fan
Instruction Manual
Model: MTF-16219

2
Contents
Page
Important safety instructions
Parts descriptions_________________________________
Assembly instructions
Fan operation
Cleaning and Maintenance
Specification
3-4
4
5
5
6
6

3
IMPORTANT SAFETY INSTRUCTIONS
1. Read all instruction carefully and keep this manual for future reference.
2. Do not let the appliance touch any hot surfaces.
3. To avoid electric shock, do not place the cord, the plug or the appliance in water
or other liquids.
4. Close supervision is necessary when the appliance is used by or near the children.
5. Unplug the plug outlet when not in use and before cleaning.
6. Do not operate the appliance with a damaged cord or plug or after the appliance
malfunctions or has been damaged in any manner. Return the appliance to our
customer service center for examination.
7. Do not let the cord hang over the edge of a table or counter or touch hot surfaces.
Do not place the appliance on an unsteady or cloth covered surface.
8. Please check the power cord & the plug firstly to see if they are normal, and
check the body to see if there is any a crack or damages. If there is any
abnormal, please call the customer service hotline for assistance.
9. When you are going to move the fan or not in use, please cut off the power and
unplug the plug.
10. Do not use the fan in the area at high humility, temperature higher than 40℃ or
dusty area.
11. Do not insert the fingers or another object into the fan during operation.
Especially take care of the children.
12. Please do not blow to the elder, the children or the patient directly for a long time.
13. Do not spray any detergent such as bug or mosquito killer into the fan to prevent
it from damages to the plastic material.
14. The appliance is for household use only. Do not use at outdoors or for any
commercial or industrial purpose.
15. This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning use
of the appliance by a person responsible for their safety.
16. Children should be supervised to ensure that do not play with the appliance.
17. Always disconnect the mains power, before any user maintenance.
18. If the supply cord is damaged, it must be replaced by the sole distributor, its
service agent or similarly qualified persons in order to avoid a hazard.
19. Please ensure that the fan is switched off from the supply mains before removing
the guard.
20. Only use on 220-240VAC, 50/60Hz power supply.

4
21. Do not operate the fan in the presence of explosive and/or flammable fumes.
22. Do not place the fan or any parts near an open flame, cooking or other heating
appliance.
23. Do not hang or mount fan on a wall or ceiling.
24. Do not operate if the fan housing is damaged.
PARTS DESCRIPTIONS
①Lens
②Air outlet
③Front housing
④Front column
⑤Front base
⑥Cover
⑦Rear housing
⑧Rear column
⑨Rear base

5
Control panel
①On/Off
②Oscillation
③Speed
④Timer
LED display
①Power on
②Oscillation indicator
③Speed indicator
④Timer1h, 2h, 4h indicator
ASSEMBLY INSTRUCTIONS
Do not plug in before complete installation.
Bottom installation as below:

6
FAN OPERATION
Connect to AC220V, 50HZ power supply, LED indicator shine, then both control
panel and remote control is available for operation.
Control panel
1．On/Off button
Press the ON/OFF button to boot the fan, it’s default setting is low speed, normal
mode.
Press it again to turn off the fan.
2．Oscillation button
Press the oscillation button to boot the oscillation function, press it again to close.
3．Speed button
Adjustable speed: press it to switch from low speed to middle speed, then high speed.
4．Timer button
Press timer button to switch from 1h to 7h, 1h each time. The related LED indicator
will change accordingly. The fan will automatically stop when timer come to 0.
Remote control
1．ON/OFF button
Press ON/OFF button to start the fan, then default setting is low speed
Press it again to switch to middle speed
Main body
Butterfly screw

7
Press it again to switch to high speed
Press it again to shut down the fan
Other function is the same as the control panel.
CLEANING AND MAINTENANCE
Pull the plug out before cleaning the fan.
Do not immerse the fan body into the water.
Use soft cloth & cleaning fluid to purify the blade,
front and back cover. Wipe the water after cleaning.
To avoid deformation or damage, please do not adopt
corrosive cleaning fluid, gasoline, and wine to clean the
plastic part.
For storage, please pack the fan and put it in a dry and
cool place.
SPECIFICATION
●Voltage/Frequency：220-240V/50Hz
●Power：45W
●N.G：4.2kg
●Size：320(L)x320(W)x1015(H)mm
Wind outlet
Main body
Self-tapping screw

8
NOTICE ABOUT RECYCLING
Your product is designed and manufactured with high quality
materials and components which can be recycled and reused.
This symbol means that electrical and electronic equipment,
at their end-of-life,
should be disposed of separately from your household waste.
Please dispose of this equipment at your local community
waste collection/ recycling centre.
In the European Union there are separate collection systems for used
electrical and electronic products.
Please help us to conserve the environment we live in!
DECLARATION OF CONFORMITY
Herewith, Amiridis-Savvidis S.A. states that this product, complies with the
requirements of below directives:
EMC-Directive: 14 / 30 / EU
Low Voltage Directive: 14/ 35 / EU
CE Marking: 93 / 68 / EEC
RoHS Directive: 11 / 65 / EU
The detailed declaration of conformity can be found at www.morris.gr
Exclusive importer in Greece:
Amiridis –Savvidis S.A.
87A, 17th Noemvriou str, P.C. 55534
Thessaloniki –Greece
T: [phone] | F: [phone]
www.amiridis-savvidis.gr
www.morris.gr