Motorola 6803578F42 User manual

Universal Bluetooth®
Hands-free Speaker
T305
T305 MOTOMANUAL

Figure 1
1
1
2
34
56

2
Figure 2
Charging
Port
Figure 3

3
General and safety information
European Union Directives Conformance Statement
Hereby, Motorola Inc., declares that this T305 is in
compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
You can view your product’s Declaration of Conformity (DoC) to Directive
1999/5/EC (the R&TTE Directive) at www.motorola.com/rtte.
Caring for the Environment by Recycling
When you see this symbol on a Motorola product, do not dispose the
product with household waste.
Recycling Mobile Phones and Accessories
Do not dispose of mobile phones or electrical accessories, such as Do
not dispose of mobile phones or electrical accessories, such as chargers
or headsets, with your household waste. In some countries or regions,
collection systems are set up to handle electrical and electronic waste
items. Contact your regional authorities for more details. If collection
systems aren’t available, return unwanted mobile phones or electrical
accessories to any Motorola Approved Service Centre in your region.
FCC Notice to Users
Users are not permitted to make changes or modify the device in any way.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
English

4
a
nguage
Initial set up
Welcome to the world of Motorola digital wireless communications! We
are pleased that you have chosen the Motorola T305 portable Bluetooth®
Hands-free Speaker.
Before you begin
Take a moment to familiarize yourself with your T305 hands-free speaker.
See figure 1 on page 1.
1Speaker
2Multicolor indicator light and Call Button
3Volume up (+) button
4Volume down (-) button
5Power button
6Microphone
Charging your hands-free speaker
See figure 2 on page 2.
The indicator light turns steadily red when the battery is charging and the
hands-free speaker is turned off. It may take up to 1 minute for the indicator
light to turn on. When the hands-free speaker’s battery is fully charged
(about 2 hours), the indicator light turns steadily blue.
Note: Do not place the hands-free speaker with clip installed on visor while
charging. Hands-free speaker is functional while charging.
The rechargeable battery that powers this product must be
disposed of properly and may need to be recycled. Contact
your local recycling center for proper disposal methods. Never
dispose of batteries in fire because they may explode.
English

Installing the hands-free speaker in your car
See figure 3 on page 2.
1. Slide the visor clip onto the mounting bracket on the bottom of the hands-
free speaker. To do this, place the loop end first onto the hands-free
speaker and slide forward.
The visor clip is reversible to allow placement of your hands-free speaker
on either leading or trailing edge of your car’s sun visor.
2. Slide the visor clip on your sun visor.
The visor clip is reversible to allow placement of your hands-free speaker
either on the front or the back of your car’s sun visor.
When installed, the Power button must be facing toward you.
Adjusting the hands-free speaker volume
To adjust volume, press and hold either volume button on the side of the
hands-free speaker.
Note: hands-free speaker volume cannot be adjusted during an incoming call.
Pairing your hands-free speaker and phone
Your phone’s Bluetooth feature is off by default. Make sure the Bluetooth
feature is turned on in your phone before using your hands-free speaker.
Please check your phone’s user’s guide.
Before you can use your hands-free speaker, you must pair (link) it with
your phone.
1. Ensure the hands-free speaker is in pairing mode
To initiate easy pairing, power on the hands-free speaker by pressing and
holding the Power button until the indicator light becomes steadily lit in
purple. Then, release the button.
After a few moments, the indicator light will be steadily lit in blue to indicate
that the hands-free speaker is in pairing mode. If the hands-free speaker
does not enter pairing mode, see the Troubleshooting section for help.
5
English

2. Set your phone to look for your hands-free speaker
Perform a device discovery (or scan) from the phone. For details about
device discovery, consult your phone’s user’s guide. The phone lists
Bluetooth devices it finds.
Select Motorola T305 in the list of discovered devices and confirm by
following the on-screen prompts.
When prompted by the phone, enter the passkey 0000 and confirm.
When your hands-free speaker successfully pairs with your phone, the
indicator light changes to flashing blue with quick purple flashes.
After you have successfully paired your phone and the hands-free speaker,
you do not need to repeat these steps each time you use the hands-free
speaker.
Test and use
Your phone and hands-free speaker are now paired and ready to make
and receive calls. To confirm they are successfully paired and operating
properly, place the hands-free speaker on your car sun visor and make a call
from your phone. You will hear ringing from the hands-free speaker.
English
6

7
English
Using your hands-free speaker
Turning your hands-free speaker on & off
To turn your hands-free speaker on, press and hold the Power button until
the indicator light turns purple. Then, release the button.
Note: the hands-free speaker may take up to 3-4 seconds to turn on.
To turn your hands-free speaker off, press and hold the Power button until
the indicator light turns purple and then turns off.
To save battery power, your hands-free speaker will turn off when not
connected to your phone for more than 30 minutes.
Making and receiving calls
Your hands-free speaker supports both hands-free and headset profiles.
Accessing call functions depend upon which profile your phone supports.
See your phone’s user’s guide for more information.
Note: Some features are phone/network dependent.
Function Action
Receive a call Tap the Call button
End a call Tap the Call button – If a call is on hold, tap
twice to end all calls
Reject a call Tap either volume button
Redial last call Press and hold the Call button until you hear a beep
Make a voice dial call Tap the Call button and speak the name
after the tone
Answer a second incoming call Press and hold the Call button until you hear
a beep (The 1st call is placed on hold)
Toggle between two active calls Press and hold the Call button
Mute or un-mute a call Tap both Volume buttons
Note: when turning on your hands-free speaker during a phone call, audio
is transferred automatically to your hands-free speaker (provided that your
hands-free speaker and phone have previously been connected and your
phone supports this feature).

Indicator lights
With the charger plugged in:
Indicator Status
Steady red Charge in progress
Steady blue Charging complete
Note: Charging status is not displayed when hands-free speaker is in use.
With no charger plugged in:
Indicator Status
Off Power off
Steady purple Powering up
Steady blue Pairing mode
Red Low battery
Blue with rapid purple flashes Successful pairing
Slow blue pulse Connected (not on a call)
Blue flash Standby (not on a call)
Quick blue flash Incoming call
Slow purple pulse Muted
Audio tones
Audio tone Status
Single high tone when pressing volume button Volume at minimum or maximum
5 rapid high tones repeated every 60 seconds Low battery
No audio indications: deteriorating quality Out of range
Ring tone Incoming call
Single high tone Pairing confirmation
Single low tone Voice activation
Dual high/low tone (phone dependent) Voice tag not recognized
Single high tone End call
Low to high tone Phone network not available
2 ascending tones Mute enabled
2 descending tones Mute disabled
8
English

Troubleshooting
My hands-free speaker will not enter pairing mode: make sure that any
devices previously paired with the hands-free speaker are turned off. If the
indicator light is flashing in blue, turn off the other device and wait for 10
seconds. The indicator light becomes steadily lit in blue indicating that the
hands-free speaker is now in pairing mode.
My phone does not find my hands-free speaker: make sure the indicator
light on your hands-free speaker is steadily lit when you phone is searching
for devices.
My hands-free speaker worked before but now it is not working: Make sure
the Bluetooth feature is turned on in your phone. If the Bluetooth feature
has been turned off or was turned on temporarily, you may need to restart
the Bluetooth feature and pair your phone and hands-free speaker again.
If you have any additional questions, please call your hotline number
(0870-9010-555) or visit us at www.motorola.com.
9
English