Motorola ML25055 User manual

Quick Start Guide
Motorola ML25055
2-Line Cordless Handset
Accessory

Registering your phone
A cordless handset will not operate until it is
registered to the base.
Once you have unboxed and plugged in your
Motorola ML25055 phone it will be ready to register
to the Motorola ML25254 or the corded base of
Motorola ML25255 system.
During the registration process, keep the handset
near the base. Up to 10 cordless handsets (in total)
can be registered to one base.
To register your Motorola ML25055 handset:
1. If a handset has not been registered to the
base, the display will show PRESS “REG” TO
INITIATE REGISTRATION once the handset has
been activated. Press REG softkey to start the
registration.
If the handset does not display the PRESS
“REG” TO INITIATE REGISTRATION message,
the REGISTER option is available in the PHONE
SETTINGS - REGISTRATION menu.
• In idle mode, press Menu/Flash (on cordless
handset) to go to the main menu.
• Using VOL + and VOL - of the navigation
button to scroll to PHONE SETTINGS . Press
SELECT softkey.
• Using VOL + and VOL - of the navigation
button to scroll to REGISTRATION . Press
SELECT softkey.
• Using VOL + and VOL - of the navigation
button to scroll to REGISTER . Press SELECT
softkey.
2. The handset will display PRESS BASE UNIT PAGE
BUTTON UNTIL BEEP .
3. Press and hold PAGE button on the base for
about 3 seconds.
4. The base will display REGISTERING... to indicate
the base is now in registration mode.
5. If registration is successful, both phones will
beep and display REGISTRATION COMPLETE! If
registration is not successful, move the phones
closer together and try again.
NOTE
Your Motorola ML25055 cordless handset accessory
is also compatible with ML25212, ML25252 and
ML25260 systems.

Making Calls
1. Press tor s(to activate the speakerphone) and
the phone will select the first available line.
Or, press LINE 1 or LINE 2 softkey to select the line
you want.
2. Wait for a dial tone, then dial the phone number.
3. Press ewhen finished.
Joining a call in progress
While a call is in progress, another user can join that
call by pressing the corresponding LINE softkey in
the handset. Both parties on the original call will
hear a tone to alert them someone else has joined
the call.
NOTE
If the Line Privacy feature is On for the original call,
the call cannot be joined by another user.
Making an Intercom Call
1. Press Int./Hold to bring up the list of all
registered handsets and base (except itself).
2. Using VOL + and VOL - of the navigation button
to scroll to the desired handset or base and press
SELECT softkey.
3. To cancel the intercom call, press STOP softkey.
Transferring a Call to Another Extension
1. During a call, press XFER softkey. The current call
is put on hold.
2. Using VOL + and VOL - of the navigation button
to scroll to the handset or base you want to
transfer the call to. Press SELECT softkey.
3. This will initiate an intercom call to the selected
handset or base.
Wait until the selected handset or base answers
the intercom call and have a conversation and
then hang up to finish the transfer or press CONF
softkey to have a 3 way conference call.
If the selected unit rejects the intercom call, or
the call is not answered within 30 seconds, the
call is transferred back to the original unit.

Handset Layout
Easy to Navigate Menus
1. Press Menu/Flash to access the feature and
setup menus.
2. Using VOL + and VOL - of the navigation button
to change your selection on the menu.
3. Press SELECT softkey to enter menus or make
selections.
4. Press BACK softkey to return to a previous menu
or EXIT button to return to the idle screen.
Manufactured, distributed or sold by Meizhou Guo Wei Electronics Co. LTD.,
ocial licensee for this product. MOTOROLA and the Stylized M Logo are
trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and
are used under license. All other trademarks are the property of their respective
owners. © 2019 Motorola Mobility LLC. All rights reserved.
Issue 1.1 (EN-US)
LED Event
Indicator
Headset Jack
Speakerphone
3 Softkeys
DND / Privacy
Exit
Caller ID
Record
Volume -
Menu / Flash
End
Talk Volume +
Directory
Redial
Intercom /
Hold
Mute / Delete