Motorola H375 - Headset - Over-the-ear User manual

Quick Start Guide
motorola
H375
Call Button
Power Button
Indicator
Light
Volume
Buttons
Microphone
Speaker
Earhook
Before using this product, read the Important Safety and Legal
Information pamphlet and follow its instructions.
Take a moment before you get started to
familiarize yourself with your new
H375 Headset.
BEFORE YOU BEGIN
Charging
Port
CHARGE
Your Headset's Battery
Note: Headset is not functional while charging.
1
Plug the Motorola charger into the end of
the headset.
The indicator light turns on when the
battery is charging. It may take up to 30
seconds for the light to turn on. When the
headset's battery is fully charged (about 3
hours), the indicator light is steadily lit in
blue.
Unplug the charger from the headset.
1
2
2
START BLUETOOTH
FEATURE
Your Phone
Press (Menu)> Settings > Connection >
Bluetooth Link > Setup.
Scroll to Power.
Select Change.
Scroll to On.
Press Select to turn on the Bluetooth
feature. The Bluetooth feature remains on
until you turn the feature off.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
1
2
3
4
5
Your phone's Bluetooth®feature is off by
default. To use your headset, you must turn on
the Bluetooth feature in your phone.
For most Motorola phones (at the main menu):
M

Indicator Light
(steadily blue
for pairing mode)
Power
Button
3
PAIR
Your Headset
Before you can use your headset, you must pair
(link) it with your phone.
Step A - ENSURE HEADSET IS IN PAIRING
MODE
Power on headset by pressing the Power
button to initiate easy pairing. After a few
moments, the indicator light will be steadily lit
in blue to indicate headset is in pairing mode.
If the headset does not enter pairing mode,
see TROUBLESHOOTING for help.
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The use of wireless devices and their
accessories may be prohibited or restricted in certain areas.
Always obey the laws and regulations on the use of these
products. The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other
product or service names are the property of their respective
owners.
© Motorola, Inc. 2007.
Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196
www.hellomoto.com
1-877-MOTOBLU
1-888-390-6456 (TTY/TDD United States for
hearing impaired)
Guide Number: 6809513A04-O
PAIR CONTINUED
Your Phone
Step B - SET YOUR PHONE TO LOOK FOR
YOUR HEADSET
3
4
5
1
2
For most Motorola phones:
On your Motorola phone, press (Menu)>
Settings > Connection > Bluetooth Link >
Handsfree > Look for Devices.
The phone lists Bluetooth devices it finds.
Select Motorola H375.
Select OK or Ye s to pair your headset with
your phone.
Enter the passkey: 0000
Select OK.
When your headset successfully pairs with
your phone, the indicator light flashes purple
and blue.
Note:These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
M
34
TEST AND USE
Your phone and headset are now paired and
connected to make and receive calls.
To make a call:
Place headset ear bud on your ear with the
earhook also securely fitted over your ear.
On the phone, dial the number you want to
call and press SEND key on your phone.
If your phone and headset are successfully
paired, you will hear ringing on the headset.
After you have successfully paired your
phone and headset, you don't need to
repeat these steps. For daily use, ensure
that your headset is turned ON and that
your phone's Bluetooth feature is ON.
To save battery power, turn OFF the
headset when you don't use it for an
extended time by pressing and holding the
Power button.
1
2
3

USING YOUR H375
See
Features and
Functions Guide
on the reverse side
for information on
using your H375
TROUBLESHOOTING
My headset will not enter pairing mode.
Make sure that any devices previously paired
with the headset are turned off. If the indicator
light is not steadily lit in blue, first turn off the
other device, then turn your headset off and on.
The indicator light becomes steadily lit in blue
indicating the headset is now in pairing mode.
My phone doesn't find my headset.
Make sure the indicator light on your headset is
on (lit in blue) and steady when your phone is
searching for devices (see step 3).
My headset worked before but now it's not
working.
Make sure your phone is on and the Bluetooth
feature is turned on in your phone (see step 2).
If the Bluetooth feature was turned off or was
turned on only temporarily, you may need to
restart the Bluetooth feature (see step 2) and
pair your phone and headset again (see step 3).
Support.
If you need more help, contact us at
1-877-MOTOBLU or visit us at
www.hellomoto.com/Bluetoothsupport
IMPORTANT:
Be sure to first follow the
Quick Start Guide
on the reverse side
of this guide
to complete initial setup
of your H375.
Features and
Functions Guide
Power Button
Indicator
Light
TURNING HEADSET
ON AND OFF
To turn your headset on, press and hold
the Power button until the indicator light
flashes.
To turn your headset off, press and hold
the Power button until the indicator light
flashes rapidly and then turns off.

WEARING THE HEADSET
To wear your headset, flex the earhook and
loop it over your ear as shown.
Your H375 headset is supplied with both round-
and oval-shaped earbuds to provide personal
choice for maximum comfort.The earbud is fitted
onto the end of your headset’s earpiece speaker,
and placed onto your ear when using your
headset as shown.
CHANGING FOR USE
ON OTHER EAR
Firmly lift and pull the
top of the earhook up
and off speaker stem
as shown.
Flip the headset over.
Firmly attach the
earhook to the speaker
stem as shown.
1
2
3
You can wear your H375 headset on your left or
right ear. The headset comes ready for the right
ear. To change the headset for the left ear:
Volume Buttons
Power Button
CHANGING VOLUME
BUTTON ORIENTATION
You can also change the orientation of the
volume buttons on your headset.
Turn the headset power off.
Press and hold the Volume button you
want to assign as the "volume up" button
and the Power button to power on the
headset. The indicator light flashes three
times in blue.
1
2
• The essential requirements and
other relevant provisions of Directive
1999/5/EC.
• All other relevant EU Directives.
European Union Directives Conformance
Statement
Product
Approval
Number
The above gives an example of a typical Product
Approval Number.
You can view your product’s Declaration of Conformity
(DoC) to Directive 1999/5/EC (to R&TTE Directive) at
www.motorola.com/rtte. To find your DoC, enter the
product Approval Number from your product’s label in
the “Search” bar on the web site.
Hereby, Motorola declares that
this product is in compliance with:

MAKING CALLS
Function Action
Make a voice dial call Tap the Call button
and speak the
name after the tone
End a call Tap the Call button
Answer a call Tap the Call button
Ignore a call Press and hold either
Volume button until
incoming call stops
ringing
Redial last call Press and hold the
Call button for at least
2 seconds until you
hear a beep
Mute or unmute a call Tap both Volume
buttons
Note: Some features are phone/network dependent.
Note: Your H375 supports both Handsfree and Headset
Profiles. Accessing call functions depends upon which profile
your phone supports. See your phone's user's guide for mor
e
information.
CHECKING BATTERY LEVEL
To check battery level while headset is powered on,
press and hold both volume buttons for 5 seconds
until you hear a beep. The indicator light displays the
following charge status for a few seconds.
Indicator Light Charge Level
Red Battery at less than
10% charge
Purple Battery at between
10% and 80% charge
Blue Battery at more than
80% charge
CHARGING STATUS
With the Charger Plugged In
Indicator Light Charge Status
Red Charging (battery
level less than 10%
charge)
Purple Charging (battery
level more than 10%
charge)
Blue Charging complete
With No Charger Plugged In
Indicator Light Headset Status
Off Power off
Three blue flashes Powering on/off
Steady blue Pairing mode
Rapid blue/purple flashes Pairing/connect
successful
Quick blue flash Incoming/outgoing call
Slow blue flash Connected (on a call)/
Standby (not on a call)
Slow red flash Idle (not connected
to phone)
Slow purple flash Connected call muted
Quick red flash Low battery
Note: After 30 minutes on a call or of inactivity, the light stops
flashing to conserve power, but the headset remains on.
OPERATING STATUS AUDIO TONES
AudioTone Headset Status
Ascending tone Powering on
Descending tone Powering off
Two ascending Pairing successful
tones
Ring tone Incoming call
Two short tones when Volume at minimum
pressing Volume button or maximum
High/low tones Low battery
repeated every 60 sec.
No audio indications; Out of range
deteriorating quality
Three ascending tones Connected call
Three descending tones Ended call
Two rapid ascending Mute enabled
tones
Two rapid descending Mute disabled
tones