Motorola HS850 - Headset - Over-the-ear User manual

motorola.com
HS850

1
Welcome
The Motorola Wireless Headset HS850
makes connectivity invisible and
reliable. It is astonishingly advanced and
simple to use.
Motorola is actively creating
Bluetooth
®
solutions for work, play,
home, and life everywhere around the
globe.
Thank you for choosing the Motorola
Wireless Headset HS850 with
Bluetooth technology!

2
Export Law Assurances
This product is controlled under the export
regulations of the United States of America and
Canada. The Governments of the United States
of America and Canada may restrict the
exportation or re-exportation of this product to
certain destinations. For further information
contact the U.S. Department of Commerce or
the Canadian Department of Foreign Affairs and
International Trade.
The use of wireless devices and their
accessories may be prohibited or restricted in
certain areas. Always obey the laws and
regulations on the use of these products.
MOTOROLA and the Stylized M Logo are
registered in the US Patent & Trademark Office.
The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under
license.
All other product or service names are the
property of their respective owners.
© Motorola, Inc., 2004.
6809489A97-O

3
Contents
Safety and General Information . . . 4
Introduction. . . . . . . . . . . . . . . . . . . 10
Headset Features . . . . . . . . . . . . . 10
Using Your Headset . . . . . . . . . . . . 12
Pairing Your Headset and
Phone . . . . . . . . . . . . . . . . . . . . . . 15
Wearing Your Headset. . . . . . . . . . 19
Controlling Headset Volume . . . . . 22
Making and Receiving Calls. . . . . . 23
Headset Indicator . . . . . . . . . . . . . 28
Audio Tones. . . . . . . . . . . . . . . . . . 30

4
Safety and General
Safety and
General
Information
IMPORTANT INFORMATION ON
SAFE AND EFFICIENT OPERATION.
READ THIS INFORMATION BEFORE
USING YOUR DEVICE.
Users are not permitted to make
changes or modify the device in any
way. Changes or modifications not
expressly approved by the party
responsible for compliance could void
the user’s authority to operate the
equipment. See 47 CFR Sec. 15.21.
This device complies with part 15 of the
FCC Rules. Operation is subject to the

Safety and General
5
following two conditions: (1) This device
may not cause harmful interference,
and (2) this device must accept any
interference received, including
interference that may cause undesired
operation. See 47 CFR Sec. 15.19(3).
Electromagnetic
Interference/Compatibility
Note: Nearly every electronic device is
susceptible to electromagnetic
interference (EMI) if inadequately
shielded, designed, or otherwise
configured for electromagnetic
compatibility.
Facilities
To avoid electromagnetic interference
and/or compatibility conflicts, turn off
your device in any facility where posted
notices instruct you to do so. Hospitals

6
Safety and General
or health care facilities may be using
equipment that is sensitive to external
radio frequency (RF) energy.
Aircraft
When instructed to do so, turn off your
device when on board an aircraft. Any
use of a device must be in accordance
with applicable regulations per airline
crew instructions.
Medical Devices
Hearing Aids
Some devices may interfere with some
hearing aids. In the event of such
interference, you may want to consult
with your hearing aid manufacturer to
discuss alternatives.
Other Medical Devices
If you use any other personal medical
device, consult the manufacturer of your

Safety and General
7
device to determine if it is adequately
shielded from RF energy. Your physician
may be able to assist you in obtaining
this information.
Industry Canada Notice to
Users
Operation is subject to the following
two conditions: (1) This device may not
cause interference and (2) This device
must accept any interference, including
interference that may cause undesired
operation of the device. See Ref IC: RSS
210 Sec. 5.11. The term “IC:” before
the certification/registration number
signifies that registration was
performed based on a Declaration of
Conformity indicating that Industry
Canada technical specifications were
met. It does not imply that Industry

8
Safety and General
Canada approved the equipment. See
Ref IC Self-Marking 6(f) and RSP-100
Sec. 4.
FCC Notice to Users
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to part
15 of the FCC Rules. These limits are
designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instructions, may cause
harmful interference to radio
communications. However, there is no
guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful

Safety and General
9
interference to radio or television
reception, which can be determined by
turning the equipment off and on, you
are encouraged to try to correct the
interference by one or more of the
following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between
the equipment and the receiver.
• Connect the equipment to an
outlet on a circuit different from
that to which the receiver is
connected.
• Consult the dealer or an
experienced radio/TV technician
for help.

10
Introduction
Introduction
Headset Features
1—Headset Indicator LED Provides
visual status about headset.
2—Volume Control Buttons Adjusts
speaker (receive) volume up or
down.
9
1
8
23
10
7
5
46
Headset off
(boom closed) Headset on (boom open)

Introduction
11
3—Microphone Receives your voice
input.
4—Boom Contains microphone and
controls power (On/Off) on headset.
5—Earhook Attaches headset to
your ear.
6—Speaker Plays the sound you
receive on the call.
7—Charging Port Accepts the plug
for the battery charger.
8—Lanyard Loop Lets you attach a
lanyard to the headset, so you
can wear the headset around your
neck and always keep it near.
9—Multifunction Button E
Controls several headset functions.
10—Removable Speaker Shroud
Helps channel sound to your ear.
Shroud can be removed if it
causes discomfort.

12
Using Your Headset
Using Your
Headset
Charging Your Headset
First-Time Use —Before you can use
your headset, you need to charge its
self-contained battery for two hours.
Recharging —When you hear five
rapid high tones through the headset
speaker, repeated at 20-second
intervals, the headset battery needs to
be recharged.
Over time, batteries gradually wear
down and require longer charging times.
This is normal. The more you talk on the
phone with the headset, the less
standby time your battery has.

Using Your Headset
13
The rechargeable batteries
that power this product must
be disposed of properly and
may need to be recycled. Contact your
local recycling center for proper disposal
methods. Never dispose of batteries in a
fire because they may explode.
How to Charge
Action
1 Plug the Motorola charger into your
headset, with the charger’s release
tab facing down and your headset
facing up.
Release Tab
Facing Down

14
Using Your Headset
2 Plug the other end of the charger
into an electrical outlet.
While charging, the headset
indicator turns on and remains on
until charging is complete. The
headset will not function while
charging. Your headset fully
charges in approximately two hours.
3 When charging is complete
(indicators off), remove the charger
from the electrical outlet, press the
release tab, and detach the charger
cord from the headset.
Action

Using Your Headset
15
Note:
You can also use a
Motorola Original™ Vehicle Power
Adapter to charge your headset while in
your vehicle.
A fully charged headset battery provides
approximately:
• talk time – 8 hours
• standby time (boom open) – 200
hours
Pairing Your Headset
and Phone
Note: You must pair your headset and
phone before you can make a call.
“Pairing” creates a link between
devices equipped with Bluetooth
wireless technology and allows the
phone to remember your headset’s

16
Using Your Headset
unique ID. After your headset and phone
are paired, your headset automatically
connects to your phone any time you
open the boom.
With your headset and phone in close
proximity:
Step
1 Put your headset into pairing mode.
a With the headset’s boom closed,
press and hold the Multifunction
Button
E until the headset
indicator turns on (about
3 seconds).
The headset indicator turns on.
b Release the button, then open the
headset boom.
The headset indicator remains on.

Using Your Headset
17
2 Perform a device discovery from
the phone.
For details on device discovery
for your phone, refer to the
phone’s user’s guide.
When the scan is complete, the phone
displays the devices found.
3 Select the Motorola HS850 from the
discovered devices list and confirm
following the on screen prompts.
4 When prompted by the phone, enter
the passkey
0000 and confirm to pair
the headset with the phone.
The device ID is now stored in the
phone’s memory.
Pairing is successful when the
headset indicator flashes 10 times
rapidly.
Step

18
Using Your Headset
Pairing to Additional
Devices
Your headset can store pairing
information for up to eight different
devices that have Bluetooth wireless
technology. Devices are stored in a
“Paired Device List” in memory in
chronological order. When an attempt to
pair to more than eight devices is made,
the oldest paired device is removed
from the list.
Any of the eight paired devices can
initiate a paired connection to your
headset.
Your headset will only automatically
initiate a paired connection (by opening
the boom) with the
last device it was
connected to . If you want to connect
your headset to another device in the