Motorola BOOM User manual

MOTOROLA BOOM
EN

EN Check it out 1
Check it out
here’s what you can do
Enjoy crystal clear conversations with your
MOTOROLA BOOM Bluetooth® headset. Three
distinct wear styles for all-day comfort. So
packed with features, like wide-band audio and
noise cancellation, it’s impossible to ignore.
Go ahead, check it out:
At a glance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Charge it . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Connect & go. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Comfort . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Basics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Advanced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Want more?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Safety, Regulatory & Legal . . . . . . . . . . . . . . . . . . . . . 21
Caution: Before using your product, please
read the safety, regulatory and legal
information at the back of this guide.

2At a glance EN
At a glance
the important bits, quick and easy
Volume Up
Button
Call Button
Press to
answer/end
call.
Boom
open - on
close - off
Charge
(Micro USB)
Volume Down Button
Microphone
Status Light
green - over 4 hours talk-time
yellow - 2-3 hours talk-time
red - under 1 hour talk-time

EN At a glance 3
Ear Hook
Earpiece
Wear

4Charge it EN
Charge it
let’s get you up and running
To charge your headset, plug the charger into the
headset’s micro USB port.
Note: Fully charge the headset before you use it.
Tip: To save battery power, turn off the headset
when you’re not using it.
Caution: Your battery is designed to last the life
of your device. It should only be removed by a
recycling facility. Any attempt to remove or
replace your battery will damage the device, void
your warranty, and could cause injury.

EN Connect & go 5
Connect & go
let’s get you connected
Easypair™ method
3
Go to the Bluetooth menu on your device
to pair & connect with the headset. Enter
passcode 0000 if prompted.
1
Turn on Bluetooth on your device.
2
Turn on your headset and follow the
voice prompts.
4
When the device and headset connect,
you’ll hear “pairingcomplete”.

6Connect & go EN
NFC method
Use Near Field Communication (NFC)
technology to pair your headset and device just
by touching them together.

EN Connect & go 7
1Turn on Bluetooth® and NFC on your device.
2Turn on your headset.
3Touch the front side of the headset (with Call
button) to the NFC reader location on the
device (display must be on). The device
notifies you when pairing is complete.
Notes:
•Your device must support NFC Bluetooth
pairing. If you can’t use NFC with your device,
use the “Easypair™ method” on page 5 to
connect your headset and device.
•NFC reader location and functionality may
vary between devices. See your device user’s
guide for details.

8Comfort EN
Comfort
what feels best on you
Choose your most comfortable fit: on-ear hook,
in-ear hook, or ear tip with no hook
.
Ear hook
Wear
Rotate & turn ear hook for
right or left use
Right EarLeft Ear
Choose ear hook style
On-Ear
In-Ear

EN Comfort 9
Ear tip (no hook)
11
Remove ear hook
2
Attach ear tip
Wear

10 Basics EN
Basics
standard features, advanced quality
Calls
To …
answer a call Press the Call button.
reject a call Press and hold the Volume Up
or Volume Down button until
you hear a tone.
make a voice
dial call
Press the Call button to
activate voice recognition.
redial last
call
Press and hold the Call button
until you hear a tone.
mute or
unmute a
call
Press and hold the Volume Up
and Volume Down buttons
until you hear “mute on” or
“mute off”.

EN Basics 11
end a call Press the Call button.
change call
volume
Press the Volume Up or
Volume Down button. To
quickly change volume, press
and hold the Volume Up or
Volume Down button.
answer a
second
incoming
call
Press the Call button.
reject a
second call
Press and hold the Volume Up
or Volume Down button until
you hear a tone.
To …

12 Basics EN
Notes:
•Some features are phone/network dependent.
•Using a mobile device or accessory while
driving may cause distraction and may be
illegal. Always obey the laws and drive safely.
Status light
If light shows… your headset is…
three blue flashes powering on/off
steady blue powered on &
searching for a device
rapid blue/purple
flashes
connection successful
short blue flash incoming/outgoing
call on phone 1
short purple flash incoming/outgoing
call on phone 2

EN Basics 13
Note: After one minute on a call or 20 minutes
of inactivity, the light stops flashing to conserve
power, but the headset remains on. Closing the
boom also saves battery life.
slow blue pulse on a call
slow blue flash on standby (one
phone)
slow green flash on standby (two
phones)
slow red flash idle (not connected to
a phone)
slow purple pulse on a call (call muted)
steady red attempting to connect
short red flash low battery
steady purple in settings mode
If light shows… your headset is…

14 Advanced EN
Advanced
more clever stuff
Second device
Do you use two phones? Or maybe a phone and
a tablet? Connect with both of them.
1Pair the first device with your headset as
normal (see “Connect & go” on page 5).
2Turn off the Bluetooth® feature on the first
device.
3Now pair the second device with your headset
as normal.
4Once paired, to connect with both devices
simply turn them on. You’ll hear “phone one
connected” and “phone two connected” as
each device connects with your headset.
Note: To use headset features like voice dial,
redial, or end call, just use the feature as normal
and follow the voice prompts.

EN Advanced 15
Caller ID
If your phone knows the caller’s number, you’ll
hear “call from <number>” on an incoming call.
Note: This feature is phone/network dependent.
Battery readout
When you’re not in a call, press the Volume Up
and Volume Down buttons to hear how much
battery talk-time is left on your headset.
Tip: To save battery power, turn off the headset
when you’re not using it.

16 Advanced EN
Settings
Press and hold the Call button while turning on
the headset, then follow the voice prompts to
turn these features on/off:
• Language: Select language.
• Restore Factory Settings: Reset default
factory settings on your headset.
Caution: This feature erases all device pairing
information stored on the headset.
• Voice Interface: Turn voice prompts on/off.
• Caller ID Alert: Hear caller ID for incoming
calls.
• Multipoint: Connect your headset to two
devices.
•Wide-band: Use HD Audio Plus for increased
clarity and richer sound.
Note: Both the phone and network need to
support wide-band speech.

EN Want more? 17
Want more?
we’re here to help
Troubleshooting
A few frequently asked questions—with
answers, of course. Find more at
www.motorola.com/support.
• My headset will not enter pairing mode
Make sure that any devices previously paired
with the headset are turned off, then turn the
headset off and on (close and reopen the
headset boom). You’ll hear “Boom is ready
to pair”.
• My phone doesn't find my headset when
searching
Press and hold the Call button, and turn the
headset off and on (close and reopen the
headset boom). Follow the voice prompts to

18 Want more? EN
reset the headset. You’ll hear “Boom is ready
to pair”.
• My headset will not pair with my phone
Press and hold the Call button, and turn the
headset off and on (close and reopen the
headset boom). Follow the voice prompts to
reset the headset. You’ll hear “Boom is ready
to pair”.
• My headset connected before, but now it's
not working
Make sure your phone is on and the phone’s
Bluetooth® feature is turned on. If the
Bluetooth feature was turned off or was
turned on only temporarily, you may need to
restart the Bluetooth feature and pair your
phone and headset again. See “Second
device” on page 14.

EN Want more? 19
Connect with Motorola
•Answers:Guides, online help, and more at
www.motorola.com/support.
• Support: Visit www.motorola.com/support or
contact the Motorola Customer Support
Center at: 1-800-331-6456 (United States),
1-888-390-6456 (TTY/TDD United States for
hearing impaired), or 1-800-461-4575
(Canada).
• Bluetooth®: If you have questions or need
assistance, contact us at 1-877-MOTOBLU, or
visit www.motorola.com/bluetoothsupport or
www.motorola.com/bluetoothconnect.
• Accessories: Find more accessories at
www.motorola.com/products.